• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1134-1139
• /
• 2006

Electrical, optical, and structural properties of indium zinc oxide (IZO) anode films grown by a RF magnetron sputtering were investigated as functions of RF power and working pressure in pure Ar ambient. To investigate electrical, optical and structural properties of IZO anode films, 4-point probe and UV/VIS spectrometry, and X-ray diffraction (XRD) were performed, respectively. A sheet resistance of $15.2{\Omega}/{\square}$, average transmittance above 80 % in visible range, expecially above 85 % in 550 nm, and root mean square roughness of 1.13 nm were obtained from optimized IZO anode films grown in oxygen free ambient. All samples show amorphous structure regardless of RF power and working pressure due to low substrate temperature. In addition, XPS depth profile obtained from IZO/PES exhibits that there is no obvious evidence of interfacial reaction between IZO and PES substrate. Furthermore, current-voltage-luminance of the flexible phosphorescent flexible OLEDs fabricated on IZO anode shows dependence on sheet resistance of the IZO anode. These results indicate that the IZO anode is a promising candidate to substitute conventional ITO anode for high-quality flexible displays.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권1호
• /
• pp.15-21
• /
• 2020

In October 2019, the European Galileo navigation system operates a total of 24 satellites, two of them are in the testing phase. There are enough satellites in operation to enable precise point positioning (PPP) using Galileo signals. The number of visible satellites for Galileo in South Korea is investigated. In addition, to assess the latest performance of the Galileo kinematic PPP, data received at DAEJ reference station from October 1 to October 7, 2019, are analyzed. Galileo kinematic PPP presents some results in two categories, single-frequency PPP (SPPP) and dual-frequency PPP (DPPP). The positioning accuracy for Galileo kinematic SPPP solutions is less than 1 m root mean square (RMS) in all direction components. The Galileo kinematic DPPP achieves the positioning accuracy with an RMS value of less than 7 cm in all direction components. The results show that the latest performance of Galileo kinematic PPP at DAEJ station in South Korea is still relatively poor compared to GPS kinematic PPP. However, the residuals of Galileo code measurements are smaller than those of GPS code measurements.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.1-7
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• 한국식품저장유통학회지
• /
• 제8권3호
• /
• pp.264-268
• /
• 2001

풋고추를 수확하여 선도를 유지할 수 있도록 하기 위하여 천연항균소재를 이용한 항균용제와 항균포장필름에 대한 각각의 효과와 두 가지를 병행한 상승효과를 확인하기 위하여 풋고추를 항균용제에 침지 처리후 1$0^{\circ}C$에 저장하면서 품질변화를 측정하였다. 그 결과 항균용제와 항균포장필름에 대한 각각의 효과뿐만 아니라 두 가지를 병행하여 저장하는 경우 상승효과가 더욱 두드러지게 나타나는 것을 확인 할 수 있었다. 따라서 풋고추의 선도를 유지하는 데에 천연항균소재가 효과적으로 사용될 수 있는 것으로 나타났고, 이러한 용제가 실용가능성을 가질 수 있도록 다각도로 연구가 진행되어야 할 것으로 생각된다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.339-353
• /
• 2014

A straightforward method for optimal determining of a high frequency inductor's parasitic capacitance is presented. The proposed estimation method is based on measuring the inductor's impedance samples over a limited frequency range bordering on the resonance point considering k-dB deviation from the maximum impedance. An optimized solution to k could be obtained by minimizing the root mean squared error between the measured and the estimated impedance values. The model used to provide the estimations is a parallel RLC circuit valid at resonance frequency which will be transferred to the real model considering the mentioned interval of frequencies. A straightforward algorithm is suggested and programmed using MATLAB which does not require a wide knowledge of design parameters and could be implemented using a spectrum analyzer. The inputs are the measured impedance samples as a function of frequency along with the diameter of the conductors. The suggested algorithm practically provides the estimated parameters of a real inductance model at different frequencies, with or without design information. The suggested work is different from designing a high frequency inductor; it is rather concentration of determining the parameters of an available real inductor that could be easily done by a recipe provided to a technician.

• 대한치과의사협회지
• /
• 제15권8호
• /
• pp.611-615
• /
• 1977

The author observed histochemically the nature of the calcified tissue in the rabbit dental pulp, induced by pulpal injection of potassium permanganate. The pulp of rabbit mandibular incisors were exposed and enlarged by a dental hand reamer. The exposed pulps were injected with 0.05ml of 20mM solution of potassium permanganate dissolved in Ringer's solution in experimental tooth. Also the control tooth received a pulpal injection of 0.05ml of Ringer's solution. After pulpal injection, the tooth was plugged with a gutta-percha root canal point. The staining techniques were hematoxylin-eosin stain, van Gieson stain, PAS reaction, toluidine blue stain, alcian blue-hematoxylin stain and colloidal iron-picric acid stain. The results were as follows: 1. The pulp on experimental tooth showed osteodentin-like calcified tissue. Also, in some areas, false denticle-like substance were observed. 2. The central portion of the calcified matrix showed metachromasia in toluidine blue stain had strong staining capacity in alcian blue stain. 3. The peripheral portion of the calcified tissue revealed marked van Gieson positive reaction for collagen. But their staining ability in alcian blue was slight and metachromasia was not appeared.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.572-578
• /
• 1985

본 논문에서는 인벌류우트와 원고치형의 단점을 보완하고 양자의 장점을 취한 치형을 얻기위하여 피치점 부근에서는 인벌류우트치형으로 이끝부분에서는 원호로 하 고 이뿌리부분에서는 상대방 기어의 원호부분과 맞물릴 수 있는 곡선으로 하는 치형을 합성하고, 이 합성치형의 유효치형을 가공할 수 있는 랙치형을 이론적인 방법으로 구 하였다. 그리고, 이 합성치형의 유효치형에 대한 이끝과 이뿌리 두께의 변화와 물림 률을 검토하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.496-501
• /
• 2006

작업 지연은 건설 사업의 확실성을 저하시키는 요소 중에 하나이다. 작업 지연의 원인 분류체계를 확립하고 관리 항목을 도출하는 것은 건설 사업의 경쟁력을 갖게 한다. 하지만 작업 지연 단계의 분류체계나 지연 원인 도출에 관한 연구는 미흡하다. 따라서 본 연구에서는 건설 사업에서 차지하는 비중이 높은 공동주택 건축공사를 대상으로 설문조사를 실시하고 이를 통해 작업 지연 원인을 파악하고 공종별 지연 요소를 도출한다. 그리고 지연 요소의 우선순위를 선정하여 작업 지연 요소를 효과적으로 제거하고 관리할 수 있는 중점 관리 항목을 제시한다.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.27-32
• /
• 1985

The purpose of this study was to examine the influence of canal irrigants and smear layer on the property of apical seal. Fourty-five canals from human teeth were randomly selected and divided into 5 groups according to the irrigants used in conjunction with instrumentation. The irrigants were RC-prep in combination with Naocl, Citric acid, Naocl, Naocl in combination with $H_2O_2$, and normal saline solution. After instrumention and dry the canal with paper point, the canals were obturated by lateral condensation of Zinc-oxide eugenol sealer and gutta percha cone. All the specimens were immersed in 2% methylene blue dye solution for 7 days and the depth of dye penetration into the canals was evaluated by macros cope. The following results were obtained. 1. All the canals experimented showed varying degree of dye penetration. 2. There was no significant difference in depth of dye penetration between the groups known to be effective and ineffective in the removal of the smear layer. 3. The canals irrigated with NaOCl alone showed the highest dye penetration and mean leakage was 7.7 mm. 4. In the canals irrigated with RC-prep in combination with Naocl and citric acid, the mean dye penetration was 5.5 mm and 4.8 mm respectively, and the canals irrigated with NaOCl in combination with $H_2O_2$ and normal saline solution revealed mean dye penetration of 3.9 mm.

• 대기
• /
• 제25권4호
• /
• pp.659-667
• /
• 2015

In this study, sensitivity of inflow wind speed and turbulent Schmidt number to pollutant dispersion in an urban street canyon is investigated, by comparing CFD-simulated results to wind-tunnel results. For this, we changed systematically inflow wind speed at the street-canyon height ($1.5{\sim}10.0m\;s^{-1}$ with the increment of $0.5m\;s^{-1}$) and turbulent Schmidt number (0.2~1.3 with interval of 0.1). Also, we performed numerical experiments under the conditions that turbulent Schmidt numbers selected with the magnitude of mean kinetic energy at each grid point were assigned in the street canyon. With the increase of the inflow wind speed, the model underestimated (overestimated) pollutant concentration in the upwind (downwind) side of the street canyon because of the increase of pollutant advection. This implies that, for more realistic reproduction of pollutant dispersion in urban street canyons, large (small) turbulent Schmidt number should be assigned for week (strong) inflow condition. In the cases of selectively assigned turbulent Schmidt number, mean bias remarkably decreased (maximum 60%) compared to the cases of constant turbulent Schmidt number assigned. At week (strong) inflow wind speed, root mean square error decreases as the area where turbulent Schmidt number is selectively assigned becomes large (small).