• 제목/요약/키워드: root point

검색결과 632건 처리시간 0.025초

3차원 그래픽을 위한 Geometry 프로세서의 설계 (The Design of Geometry Processor for 3D Graphics)

  • 정철호;박우찬;김신덕;한탁돈
    • 한국정보처리학회논문지
    • /
    • 제7권1호
    • /
    • pp.252-265
    • /
    • 2000
  • 본 논문에서는 3차원 그래픽의 처리 과정 중 부동 소수점 연산이 많은 소요되는 geometry 프로세싱 처리 방법과 계산량을 단계별로 분석하였다. 그리고, 그래픽 프로세싱의 수행 특성을 추출하여, 이에 맞는 기능 유닛을 설계하고, 데이터 처리 방안과 제안하는 geometry 프로세서의 구조를 설명한 다음, 성능을 분석하였다. 제안하는 geometry 프로세서는 부동 소수점 덧셈, 곱셈, 나눗셈 연산을 동시에 수행 가능하며, geometry 프로세싱 전 단계를 수행하는데 23.5%의 성능 향상이 있었다. 그리고, 나눗셈/제곱근 연산을 위해서 면적대 성능비가 우수한 SRT 나눗셈 연산기를 추가하여 곱셈 연산기를 이용하는 연산기보다 약 23%의 성능 향상을 이루었다.

  • PDF

페어링 암호 시스템을 위한 $F_{3^m}$에서의 효율적인 MapToPoint 방법 (Faster MapToPoint over $F_{3^m}$ for Pairing-based Cryptosystems)

  • 박영호;조영인;장남수
    • 정보보호학회논문지
    • /
    • 제21권6호
    • /
    • pp.3-12
    • /
    • 2011
  • 페어링 암호 시스템에서 임의의 메시지 스트링을 타원곡선 위의 점으로 매핑하는 과정(MapToPoint)은 무시할 수 없는 연산량을 가지고 있으며 타원곡선 암호 시스템과 달리 페어링 암호 시스템에서는 $F_{3^m}$ 위의 타원곡선도 이용하기 때문에 $F_{3^m}$에서의 MapToPoint 연산이 필요하다. Barreto 등이 $F_{3^m}$ 위에서는 세제곱 계산이 선형연산인 것을 이용하여, x 좌표에 메시지를 대입하여 y 좌표를 계산하는 기존의 방법과 달리, y 좌표에 메세지를 대입하여 x 좌표를 계산하는 방법을 제안하였다. Barreto 등은 x 좌표의 계수들을 임의의 변수로 두고 이들로 이루어진 행렬을 이용하여 x 좌표를 계산했는데, 본 논문에서는 이 행렬의 크기를 줄여 보다 효율적으로 x 좌표를 계산할 수 있는 방법을 제안한다. 제안하는 방법은 Barreto 등의 방법의 44%의 메모리만으로 2~3 배 빠른 MapToPoint 연산을 수행할 수 있다.

두과목초의 질소고정에 관한 연구 I. 질소시비수준이 라디노 클로버의 질소고정 및 생장에 미치는 영향 (Studies on the Nitrogen Fixation of Legumes I. Effects of nitrogen fertilization level on nitrogen fixation and growth of ladino clover)

  • 이효원
    • 한국초지조사료학회지
    • /
    • 제13권1호
    • /
    • pp.16-22
    • /
    • 1993
  • 방목초지에서 자생하는 라디노 클로버 포복경을 l/5,000a 와그너 포트에 이식하여 온실에서 겨울동안 1일 12시간 조명시키면서 재배하였다. 50일 동안 재배 후 제 1차 수화하였고 20일 후 2차, 그리고 다시 20일 후에 3차 수확을 하였다. 처리로는 질소시비를 2.5kg/10a, 5.0kg/10a, 7.5kg/10a를 이식 및 각 예취후에 시비하였다. 조사항목으로는 생장점, 지상부 수량, 지하부 수량 그리고 엽면적을 측정하였고 그밖에 질소고정량 및 지하부의 조단백질 함량 그리고 예취 후 질소고정능의 경시적 변화를 조사하였다. 그 결과을 요약하면 다음과 같다. 1. 직물체의 생장점, 지상부 그리고 지하부 생산량을 1차. 2차에서는 5kg/10a구가 가장 많았던 반면 3차에서는 2.5kg/10a구에서 제일 좋았으며 7.5kg/10a구는 질소를 계속 시비함에 따라 식물체는 3차시에 고사하였다. 생장점수는 처리간 유의성이 인정되었다. 2. 라디노 클로버의 질소고정은 1회 예취에서 2.5kg/10a구가 가장 우수한 것으로 나타나 그 후 예취 및 질소시비를 계속함에 따라 고정량은 저하하였다. 3. 잎의 조단백질 함량은 뿌리와 포복경의 조단백함량보다 많았으며 제2차 예취시 까지는 질소시비수준을 높임에 따라 조단백질의 함량도 높아지는 경향이었으나 3차 예취시에는 다시 저하하였다. 4.아세틸렌 환원능은 예취 3주후에 최저치를 나타내다가 5주후에 예취전 상태로 회복하였으며 뿌리의 건물중도 같은 경향을 나타내었다.

  • PDF

근관 삼출액에서의 기질금속단백분해효소-8과 substance P의 수준에 관한 연구 (Matrix metalloproteinase-8 and substance P levels in root canal exudates of nonvital teeth)

  • 신수정;이우철;이재일;백승호;금기연;손원준;배광식
    • Restorative Dentistry and Endodontics
    • /
    • 제36권3호
    • /
    • pp.196-202
    • /
    • 2011
  • 연구목적: 근관 치료를 전후로 근관 삼출액을 추출하여 MMP-8과 SP의 양을 측정하고 근관 치료에 따른 변화 및 이들간이 상관관계를 보는 것을 본 연구의 목적으로 하였다. 연구 재료 및 방법: 치수괴사, 혹은 이전 근관 치료 후 치근단 병소가 있어서 근관 치료가 예정된 35개의 치아를 대상으로 하였으며, 근관 치료 첫날, 2주 후, 4주 후 paper point를 이용하여 근관 삼출액을 채취하였다. MMP-8과 SP의 양은 enzyme-linked immunosorbent assay (ELISA)를 이용하여 정량 하였다. 삼출액의 채취 시점에 따른 MMP-8, SP 양의 변화 및 환자의 통증 정도, 임상증상에 따른 MMP-8, SP의 변화는 mixed model을 이용하여 통계 분석하였으며 MMP-8과 SP의 상관관계는 Pearson correlation coefficient를 구하여 분석하였다(p < 0.05). 결과: 근관치료가 진행됨에 따라 MMP-8, SP의 양은 유의성 있게 감소하였으며(p < 0.0001), 환자의 통증이나 타진검사 시 반응이 SP의 발현에 영향을 주는 것으로 나타났다. MMP-8의 경우 SP와 미약한 양의 상관관계가 있었지만 환자의 증상이나 다른 임상검사와 상관관계가 발견되지 않았다. 결론: 본 실험에서 사용된 paper point를 이용한 근관 삼출액의 채취를 통하여 치근단 염증과정에서 발현되는 MMP-8, SP를 검출할 수 있었으며 특히 SP의 경우 환자의 증상과 보다 관련이 깊은 것으로 나타났다.

인삼 신품종의 광합성 특성 (Characteristics of Photosynthesis among New Cultivars of Ginseng (Panax ginseng C.A. Meyer))

  • 이성식
    • Journal of Ginseng Research
    • /
    • 제26권2호
    • /
    • pp.85-88
    • /
    • 2002
  • 고려인삼을 순계분리 육성하여 품종 등록한 인삼 신품종의 광도, 온도별 광합성 능력과 광합성 관련 형질인 기공, 엽록소, 비엽중 및 지상하부 형질들을 조사한 결과를 요약하면 다음과 같다. 신품종 및 자경종의 광포화점은 15,000 lux내외였고, 광합성 최적온도는 2$0^{\circ}C$였다. 광합성 능은 연풍>천풍>고풍>자경종 순으로 연풍이 가장 높았다. 호흡속도는 모든 품종이 온도가 높아짐에 따라 빨라지는 경향이었으며, 타품종에 비해 호흡량이 높았다. 비엽중은 천풍>고풍>연풍>자경종 순서로 높았고, 엽록소 함량은 품종간 차이가 근소하였다. 단위면적당 기공수는 연풍이 69.2개로 타계통의 40~47개보다 많았고, 기공의 크기는 연풍이 26.5 $\mu\textrm{m}$ 타품종 37.5~38.8 $\mu\textrm{m}$보다 적었다. 연풍은 경수가 1.8개, 장염수가 7.7개, 소염수가 41.0개, 엽면적이 12.3 dm$_2$로 타 품종보다 지상부의 생육이 양호하였다. 근중은 연풍>천풍>고풍>자경종 순으로 무거웠고, 동장은 천풍과 고풍이 각각 6.5, 6.8 cm로 자경종 5.6 cm보다 길어서 체형이 양호하였으나 연풍은 동장이 4.4 cm로 짧았다.

Effect of Light Receiving rate on Growth and Quality of Ginseng Cultivated in Plastic House

  • Sang Young Seo;Jong hyeon Cho;Chang Su Kim;Hyo Jin Kim;Min Sil An;Du Hyeon Yoon
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2020년도 추계국제학술대회
    • /
    • pp.62-62
    • /
    • 2020
  • Ginseng is a shade-plant cultivated using shading facilities. However, at too low light levels, root growth is poor, and at high light levels, the destruction of chlorophyll reduces the photosynthesis efficiency due to leaf burn and early fall leaves. The ginseng has a lightsaturation point of 12,000~15,000 lux when grown at 15 to 20℃ and 9,500 lux at 25℃. This study was conducted to select the optimal light intensity of 3-year-old ginseng grown in blue-white film plastic house. The seeds were planted in the blue-white film plastic house with different light receiving rate (March 17, 2020). Between April and September, the average air temperature in the house was 20.4-20.7℃. Average soil temperature was 18.3℃-18.5℃. The chemical properties of the test soil was as follows. The pH level was 7.0-7.4, EC was 0.5-0.6 dS/m, OM was at the levels of 33.6-37.7 g/kg, P2O5 was 513.0-590.8 mg/kg, slightly higher than the allowable 400 mg/kg. The amount of light intensity, illuminance, and solar radiation in the blue-white film house was increased as the light-receiving rate increased and the amount of light intensity was found to be 9-14% compared to the open field, 8-13% illuminance and 9-14% solar irradiation respectively. The photosynthesis rate was the lowest at 3.1 µmolCO2/m2/s in the 9% light blue-white plastic house and 4.2 and 4.0 µmolCO2/m2/s in the 12% and 14% light blue-white plastic house, respectively. These results generally indicate that the photosynthesis of plants increases with the amount of light, but the ginseng has a lower light saturation point at high temperatures, and the higher the amount of light, the lower the photosynthetic efficiency. The SPAD (chlorophyll content) value decreased as the increase of light-receiving rate, and was the highest at 32.7 in 9% light blue-white plastic house. Ginseng germination started on April 11 and took 13-15 days to germinate. The overall germination rate was 82.9-85.8%. The plant height and length of stem were long in the 9% light-receiving plastic house. The diameter of stem was thick in the 12-14% light-receiving plastic house. In the 12% and 14% light-receiving plastic house, the length and diameter of taproot was long and thick, so the fresh weight of root per plant was 20 g or more, which was heavier than 16.9 g of the 9% light-receiving plastic house. The disease incidence (Alternaria blight, Gray mold and Damping-off etc.) rate were 0.9-2.7%. The incidence of Sclerotinia rot disease was 7.5-8.4%, and root rot was 0-20.0%. The incidence ratio of rusty root ginseng was 34.4-38.7% level, which was an increase from the previous year's 15% level.

  • PDF

점적관개(點滴灌漑)에서 토양수분 이동 현상에 대한 2차원 모델 개발 연구 (2-Dimensional Moisture Migration Modeling in Drip-Irrigated Root Zone)

  • 노희명;김승현
    • 한국토양비료학회지
    • /
    • 제30권4호
    • /
    • pp.314-327
    • /
    • 1997
  • 점적 관개시 근권에서의 토양 수분 이동 현상을 2차원 원통 좌표를 이용하여 모델링 하였다. 엽면 증산, 다양한 형태의 지면 증발, 관개율의 증가로 인한 지면에서의 물 고임 현상등을 고려하였다. 모델은 유한 차분법을 이용한 수치해로 풀었다. 여러가지 비교의 결과로부터 본 연구에서 개발된 모델은 근권에서의 토양 수분 이동 현상을 잘 묘사한다고 볼 수 있었다. 모델의 민감도 분석을 통해서 몇가지 유익한 사실을 발견하였다. 토양 수분이 연직 방향으로 이동하는 속도가 더 큰 것으로 보아 자동 관개용 토양 수분 측정 센서를 설치할 경우, 관개점의 연직하방이 좋은 측점임을 알 수 있었다. 습윤대의 형태가 단지(pot) 모양으로 되는 것은 지면 증발로 인한것임을 알 수 있었다. 또한, 토양의 포화 수리 전도도가 습윤대의 확산에 큰 영향을 주는 것을 알 수 있었고, 관개 중단 후에도 연직 방향의 확산은 계속됨을 알 수 있었다.

  • PDF

Rheological Properties of Dandelion Root Concentrates by Extraction Solvents

  • Lee, Ok-Hwan;Kang, Suk-Nam;Lee, Boo-Yong
    • Food Science and Biotechnology
    • /
    • 제15권1호
    • /
    • pp.33-38
    • /
    • 2006
  • This study was performed to provide basic rheological data of dandelion root concentrates in order to predict their processing aptitude and usefulness as functional foods material. The hot water and 70% ethanol extracts of dandelion root were concentrated at 5, 20, and 50 Brix, and their static viscosity, dynamic viscosity, and Arrhenius plots were investigated. Almost all hot water concentrates showed the typical flow properties of a pseudoplastic fluid, but evaluation using the power law model indicated that the 70% ethanol concentrates showed a flow behavior close to a Newtonian fluid. The apparent viscosity of hot water and 70% ethanol concentrates decreased with increasing temperature. Yield stresses of hot water and 70% ethanol concentrates by Herschel-Bulkley model application were in the range of 0.026 - 1.368 Pa and 0.022 - 0.238 Pa, respectively. The effect of temperature and concentration on the apparent viscosity was examined by Arrhenius equation. The activation energies of hot water and 70% ethanol concentrates were in the range of $8.762-23.778{\times}10^3\;J/mol{\cdot}kg$ and $3.217-20.384{\times}10^3\;J/mol{\cdot}kg$ with increasing concentration, respectively. Storage (G') and loss (G") moduli were generally increased with increasing frequency. For the 70% ethanol concentrates, G" predominated over G' at all applied frequencies and so they showed the typical flow behavior of a low molecular solution. However, for the hot water concentrates, G' predominated over G" at more than 1.9 rad/sec (cross-over point) and so they showed the typical flow behavior of a macromolecular solution.

임간재배 시 광조절과 부엽토 처리에 따른 삽주의 생육 및 광합성 특성 (Growth and Photosynthetic Characteristics of Atractylodes japonica by Light Controls and Leaf Mold Treatment in Forest Farming)

  • 전권석;송기선;최규성;김창환;박용배;김종진
    • 한국약용작물학회지
    • /
    • 제23권2호
    • /
    • pp.161-167
    • /
    • 2015
  • This study was carried out to determine the effects of light controls and leaf mold on root growth and physiological responses of Atractylodes japonica growing in forest farming. The experiment was performed by light controls (100%, 62.5%, 40.3% and 19.7% of full sunlight) and application of leaf mold to soil. Height, stem diameter, number of flower buds and root collar diameter were the highest in leaf mold within 62.5% of full sunlight (relative light intensity 62.5%). And these were the higher in leaf mold within each light level. As the shading level increased, light saturation point and maximum photosynthesis rate decreased. As the light level decreased, SPAD value increased in control and leaf mold. As a result of surveying the whole experiment, A. japonica was judged worse root growth under the lower light level. It was concluded that the light level was one of the most important factors to produce A. japonica. Also, producing high-quality of A. japonica with the price competitiveness by using leaf mold like the experiment can be an effective way to increase incomes for farmers.

Unit Root Test를 기반으로 한 장기 시계열 데이터의 Non-Stationary 발생에 따른 구조 변화 검정 및 시각화 연구 (A Study on the Test and Visualization of Change in Structures Associated with the Occurrence of Non-Stationary of Long-Term Time Series Data Based on Unit Root Test)

  • 유재성;주재걸
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제8권7호
    • /
    • pp.289-302
    • /
    • 2019
  • 시계열의 구조 변화란, 전체 시계열 자료를 구성하는 기간에서 관측치들의 분포가 상대적으로 안정적이다가, 특정 시점에서 분포 특성의 급격한 변화를 보이는 것을 의미한다. 비정상(non-stationary) 장기 시계열 안에서도, 단기적인 추세의 변화가 일시적인 것인지, 아니면 구조적으로 변한 것인지를 적시에 판단하는 것은 중요하다. 이는 시계열 추세의 변화를 상시 감지하여, 변화에 맞는 적정한 대응을 할 필요가 있기 때문이다. 본 연구에서는 단위근 검정법을 기반으로 한 검정 결과를 시각화함으로써, 의사결정자가 시계열의 구조 변화를 손쉽게 파악할 수 있는 방안을 제시하였다. 특히 시계열을 분할한 후 검정하는 방법을 통해, 장기 시계열일 때에도 단기 구조 변화를 파악할 수 있도록 하였다.