• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.479-484
• /
• 2012

The objective of this study is to compensate the elastic recovery in the flexible forming process using the predictive models. The target shape was limited to two-dimensional shape having only one curvature radius in the longitudinal-direction. In order to predict the shape error the regression and neural network models were established based on the finite element (FE) simulations. A series of simulations were conducted considering input variables such as the elastic pad thickness, the thickness of plate, and the objective curvature radius. Then, at sampling points in the longitudinal-direction, the shape errors between formed and objective shapes could be calculated from the FE simulations as an output variable. These shape errors were expressed to a representative error value by the root mean square error (RMSE). To obtain the correct objective shape the die shape was adjusted by the closed-loop using the neural network model since the neural network model shows a higher capability of estimating the shape error than the regression model. Finally the experimental result shows that the formed shape almost agreed with the objective shape.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.113-120
• /
• 1998

For a microbial control of a plant pathogenic Pseudomonas syringae, Bacillus sp. strain BT182-3 was isolated. The strain BT182-3 had a growth inhibition against P. syringae not only on agar plate but also on cultured broth. After heat treatment at $40^{\cird}C$ and $80^{\cird}C$ for 30min, the lytic substance from the strain BT182-3 had about 52% remaining activity and 17% remaining activity, respectively. The optimal pH and temperature of the lytic substance was 6.0 and $28^{\cird}C$, respectively. Germination ratio of healthy radish seeds was 87% at $25^{\cird}C$ for 5 days in 0.8% saline, and that of the radish seeds infected with P. syringae was 67%, while that of the radish seeds treated with cultured broth of the strain BT182-3 was 90%. The 5-days healthy radish seedlings were 3.90cm at high and the seedlings infected with P. syringae were 3.06cm at high, while the seedlings treated with cultured broth of the strain BT182-3 were 4.30cm at high. The growth of the radish seedlings infected with P. syringae was inhibited after cultivation for 40days on pots, while the growth of the infected radish seedlings with P. syringae was recovered at stem length, root length and total weight at the same as the healthy seedlings after treatment of a lytic substance from the strain BT182-3.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.283-297
• /
• 1999

Purpose: To compare radiographic images of Digora/sup (R)/ system and Ektaspeed Plus film obtained from normal adults. Materials and methods: Storage phosphor plate(SPP) was placed in a film holder behind Ektaspeed Plus film package without lead foil. The effect of film on SPP was studied in a separate in vitro experiment. Forty-seven sets of images were prepared for the evaluaton. The regions of interest(ROI) for evaluation were designated at seven sites including normal anatomical structures. The image quality for each ROI was evaluated on enhanced and unenhanced storage phosphor(SP) images and Ektaspeed Plus film. Results: Two film-SPP configurations showed significantly different gray levels at each step of the aluminum step wedge(p<0.05). The contrasts were comparable. Enhanced SP images were significantly superior to unenhaned images and film in all anatomical sturctures(p<0.01). The differences between unenhanced SP images and film were significant(p<0.05) except root canal and cortical bone on alveolar crest. For anatomical items. there were statistically significant difference among five observers(p<0.05). Conclusions: The image quality of enhanced SP images were superior to Ektaspeed Plus film. and Digora system is potentially applicable to clinical diagnosis.

• Smart Structures and Systems
• /
• v.1 no.4
• /
• pp.339-353
• /
• 2005

This paper presents the results of a feasibility study on an impedance-based damage detection technique using thickness modes of piezoelectric (PZT) patches for steel structures. It is newly proposed to analyze the changes of the impedances of the thickness modes (frequency range > 1 MHz) at the PZT based on its resonant frequency shifts rather than those of the lateral modes (frequency range > 20 kHz) at the PZT based on its root mean square (RMS) deviations, since the former gives more significant variations in the resonant frequency shifts of the signals for identifying localities of small damages under the same measurement condition. In this paper, firstly, a numerical analysis was performed to understand the basics of the NDE technique using the impedance using an idealized 1-D electro-mechanical model consisting of a steel plate and a PZT patch. Then, experimental studies were carried out on two kinds of structural members of steel. Comparisons have been made between the results of crack detections using the thickness and lateral modes of the PZT patches.

• Korean Journal of Cleft Lip And Palate
• /
• v.9 no.2
• /
• pp.71-78
• /
• 2006

The case records of 24 patients in Seoul National University Hospital who had bone grafting of 29 alveolar clefts between 2001 and 2004 were examined. Details were recorded of age, sex, preoperative orthodontictreatment, the time of bone grafting, the type of donor site, cleft width, functional load applicationand the success of grafting as established by lowest marginal bone levels. Using this results and review of literature, we concluded that secondary bone graft with iliac bone before canine eruption with root development of 1/2 to 1/3 provide more favorable results and the functional load introduced to the grafted bone lower the resorption rates.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.109-115
• /
• 2002

In this study high power Nd:YAG laser welding of structural steel was investigated. For the test steel blocks of $50{\times}50{\times}200mm$ were cut and machined, and bead-on-plate weld was made on the machined surface. Argon, nitrogen, helium, dry air or mixed gases were used to find the effect of shielding conditions on the bead formation. Results demonstrated that there were Fe I rich region and Fe II rich region in the laser induced plasma column based on the spectral analysis with S-2000 field spectrometer The Fe I region was located at the root of the column near keyhole opening. On the other hand, Fe II region was found at the middle of the plasma column. In the Nd:YAG laser welding, Fe I region emitted continuum which had peak value at wave length of around 710nm, and Fe II region had the peak at 580nm. In the welding of steel by $CO_2$ laser, however, no continuum was observed. There showed two groups of strong spikes in the $CO_2$ laser welding; the first group was displayed at the wave band of 450-560nm. This spike group emitted stronger intensity of light and sharper peaks than those group at 680-800nm.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.25-37
• /
• 1986

This study was undertaken to measure the diffusibility and antimicrobial effectiveness of the medication used in clinical practice. To study the diffusibility of the root canal medicament, loss of formocresol and camphorated phenol from a cotton pellet after insertion into the pulp chamber of 260 molars prepared as routine endodontic treatment was measured. Measurement was done for the one time insertions and for the reinsertions using ultraviolet spectrophotometer. Antibacterial effectiveness against three microoganisms, Staphylococcus aureus, Staphylococcus epidermidis and a-hemolytic streptococcus, on the blood agar plate was observed by measurement of the inhibition zone with. various amount of medicaments. The following results were observed. 1. Nearly all of the medication were lost in the first day after insertion and the residual amount of camphorated phenol was greater than that of formocresol. 2. Residual amounts of medication in the reinsertion group were greater than that of the one time insertion group. 3. Within the pulp chamber diffusibility of formocresol was greater than that of camphorated phenol. 4. The amount of formocresol diffusing out from the tooth was greater than that of camphorated phenol. 5. Antibacterial effectiveness was observed from the residual amount of formocresol in the reinsertion group and in other groups no antibacterial effectiveness was observed.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.51-57
• /
• 1999

In this study, one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by stress analysis and bending fatigue test without edge preparation, with variation of joint shape. The purpose of this study is to give the welding condiltion and design standard on manufacturing one side fillet welded T-joint. As a result, the following conclusions were obtained. 1) In one side fillet welded T-joint, the larger the leg length and the penetration depth, the greater the bending fatigue strength because reduction of stress and strain on toe and root. The increase of the longitudinal leg length rather than vertical leg length contributed to the increase in bending fatigue strength. 2) In one side fillet welded T-joint without edge preparation, both general manual welding and general automatic welding were carried out with same condition. In this case, automatic welding showed deeper penetration and more increased longitudinal leg length than manual welding, so that automatic welding offers greater bending fatigue strength. 3) For one side fillet welded T-joint without edge preparation with automatic welding, the ratio(h/t) of the leg length(h) and the main plate thickness(t) in which toe crake can occur was 1.0 over.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.714-717
• /
• 2017

Schwann cells and Neuronal cells were isolated from dorsal root ganglion (DRG) in embryos of rat in vitro respectively. The cultured Schwann cells and cultured neuronal cells, respectively were co-cultured in a same plate. These cells were performed accomplishment of myelination. This myelinated co-culture system was infected by Semliki forest virus and then induced demyelination processing in this myelinated co-culture. We identified myelination and demyelination processing using antibody of peripheral myelin protein 22 (PMP 22) meaning presence of myelinated neuron.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2017-2022
• /
• 2004

There are multistage preheaters in the power generation plan to improve the thermal efficiency of the plant and to prevent the components from the thermal shock. The energy source of these heaters comes from the extracted two phase fluid of working system. These two-phase fluid can cause the so-called Flow Accelerated Corrosion(FAC) in the extracting piping and the bubble plate of the heater for example, in case of point Beach Nuclear Power Plant and in the Wolsung Nuclear Power Plant. The FAC is due to the mass transport of the thin oxide layer by the convection. FAC is dependent on many parameters such as the operation temperature, void fraction, the fluid velocity and pH of fluid and so on. Therefore, in this paper velocity was calculated by FLUENT code in order to find out the root cause of the wall thinning of the feedwater heaters. It also includeed in the fluid mixing analysis model are around the number 5A feedwater heater shell including the extraction pipeline. To identify the relation between the local velocities and wall thinning, the local velocities according to the analysis results were compared with distribution of the shell wall thicknes by ultrasonic test.