• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.285-296
• /
• 1995

Anatomical studies of sink tissues are required for better understanding the biological plant growth system and energy metabolism. Kinematics of root growth zones of two genotypes of tall fescue (Festuca arundinacea Schreb.) receiving 50 or 200 ppm N were determined. Longitudinal anatomy and cell dynamics of root growth zones were studied and calculated. The root growth zone is organized similarly to the leaf growth zone which has cell division, elongation, and maturation zones, but the root growth zone is only about 3.0 mm long compared to 25 to 30 mm for the leaf growth zone. The root cap extends about 0.4 to 0.5 mm from the apical initial, while the cell elongation zone for both cortical and metaxylem cells extends about 3.3 mm from the apical initial for both genotypes and N levels. Root cap cells elongate from an initial length of about 5$\mu{m}$ long to a final length of about 40$\mu{m}$ before being sloughed. Initial lengths of cortical and metaxylem cells were about 8.5 $\mu{m}$ and 13.0 $\mu{m}$, respectively. Elongation of cortex and metaxylem cell showed sigmoidal curves with final lengths of about 120 $\mu{m}$ for cortex cells and 650 $\mu{m}$ for metaxylem cells. Initial size and final size for both types were not affected by N level, but cell fluxes and cell elongation rates of cortical and metaxylem cells were about double in low N. Cell production rates were about 5 to 6 times higher in cortical cells than in metaxylem cells. Differences in N caused a larger change in cell production rate, duration of cell elongation, and relative cell elongation rate than did the genotypes. These data indicate that N application affects root growth longitudinally by changing cell production rate and elongation rate.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.390-396
• /
• 1995

This study was conducted to develop a computer simulation program for trickle application of nutrient solution. A computer simulation program using finite element method was developed to evaluate discharges of emitters on trickle application. The uniformity of application for two different lateral line lengths and three application methods was evaluated by the computer simulation program. The results of this study are as follows. 1. A computer simulation program was developed to determine emitter discharges from a trickle application system and pressures at emitter positions by finite element method and to design a uniform trickle application system. 2. The simulation program developed was verified by experiment. The root mean square error between experimental data and simulated data was 1.1% on the average discharge and it was found that the computer simulation program was an effective tool for the design of a trickle application system of nutrient solution. 3. The uniformity of trickle application system was evaluated for three different methods of supplying nutrient solution with different lateral line lengths. The best uniformity was obtained from the method, which supplies nutrient solution from both ends alternatively for the same period of time.

• Computers and Concrete
• /
• v.26 no.2
• /
• pp.107-114
• /
• 2020

In this study, a two dimensional model of receding contact problem has been analyzed using finite element method (FEM) based software ANSYS and ABAQUS. For this aim finite element modeling of elastic layer and two homogeneous, isotropic and symmetrical elastic quarter planes pressed by means of a rigid circular punch has been presented. Mass forces and friction are neglected in the solution. Since the problem is examined for the plane state, the thickness along the z-axis direction is taken as a unit. In order to check the accuracy of the present models, the obtained results are compared with the available results of the open literature as well as the results of two software are compared using Root Mean Square Error (RMSE) and good agreements are found. Numerical analyses are performed considering different values of the external load, rigid circular radius, quarter planes span length and material properties. The contact lengths and contact stresses of these values are examined, and their results are presented. Consequently, it is concluded that the considered non-dimensional quantities have noteworthy influence on the contact lengths and contact stress distributions, additionally if FEM analysis is used correctly, it can be an efficient alternative method to the analytical solutions that need time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.292-296
• /
• 2002

Soybean seeds were treated with blue, red and far-red lights for 0, 6, 12, and 24 hours during 24-hour imbibition before culture for 6 days. The soybean sprouts raised were classified by their hypocotyl lengths; normal (＞4cm), abnormal (＜4cm) and non-germination, and their lateral roots, hypocotyl diameters and component dry weights were measured. Red light treatment and dark imbibition reduced the abnormal soybean sprouts more than far-red and blue light treatments, meaning that the former treatments produced more commercial sprouts. The lateral roots were more formed in blue light and dark imbibition than the other light treatments, but were completely blocked by any light treatment lasted during the whole imbibition. Although any light quality treatment did not influence their primary root lengths, blue light one lengthened the hypocotyl more than the others treated during the imbibition, and far-red light enlarged its diameter. Despite this morphological change, component, total or economic yield was not significantly different among the light quality treatments during the imbibition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.172-179
• /
• 2015

The developmental mechanism of root formation is a complex process. Hereditary and environmental factors may affect the morphology of the developing root. A total of 12 cases was presented with permanent first molars with abberant root morphology. Clinically, these teeth appeared as a normal crown. However, radiographically, the root was slender, twisted and characterized by irregular lengths. In addition, root trunk length was shorter and pulp chamber was obliterated. In these cases, periapical radiolucency and loss of lamina dura were often observed. In 6 cases, an abnormal root of the primary second molars were also present, as well as root malformation of permanent first molars. In 3 cases, permanent central incisors also had a dysmorphic crown. These cases almost all had medical history, such as premature birth, brain infection or congenital heart disease in infants. The present paper describes cases of permanent first molars with an abnormal root that are rarely reported in literature. This case may intensify the variation in the permanent first molar and is intended to reinforce the clinician's awareness of rare morphology of the roots.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.199-203
• /
• 2006

The marketability of soybean sprout mainly depends on shape such as hypocotyl thickness and presence of lateral root formation, etc. To clarify the effects of agitating culture box on growth and shape of soybean sprouts, different agitation frequency (0, 3, 5 times day-1) and duration (0, 1, 2, 3 days) were applied during sprout cultivation. More frequent and longer agitation resulted in less lateral root formation and shorter hypocotyl length, while total lengths were not affected by agitation due to agitation-induced root length increment. Agitation also increased the diameter of hypocotyl's hook pin, but not the middle part. Unlike morphological characteristics, the growth of sprouts as measured by fresh and dry weight of cotyledon, hypocotyl, root were not affected by agitation. In conclusion, it is very likely that agitating culture box during sprout cultivation may alter the shape of soybean sprouts without affecting growth of sprouts.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.86-94
• /
• 2021

Objective: This study aimed to investigate the effect of micro-osteoperforations (MOPs) on external apical root resorption (EARR) during the initial orthodontic alignment phase of maxillary anterior crowding. Methods: Thirty patients (25 females, 5 males; mean age, 22.66 ± 3.27 years) who presented with moderate crowding of the upper labial segment and underwent extraction-based fixed appliance treatment were recruited. They were randomly allocated to receive adjunctive therapy with MOPs (n = 15) or treatment with fixed appliances only (control group; n = 15). EARR was measured from long-cone periapical radiographs taken at the start and the sixth month of treatment. A correction factor for the enlargement difference was used to calculate EARR. Data were analyzed with descriptive statistics and repeated-measures analysis of variance. Results: The mean root lengths of 168 teeth were measured and showed no statistically significant difference (p > 0.05) after six months of fixed appliance treatment in the MOP (mean difference [MD] = 0.13 mm; 95% confidence interval [CI] = -0.10-0.35) and control group (MD = 0.14 mm; 95% CI = -0.10-0.37). Most of the roots in the MOP and control groups (42.86% and 52.38%, respectively) showed only mild resorption. Less than 8% of the roots in both groups (7.14% in the MOP group and 4.76% in the control group) showed moderate resorption. Conclusions: Acceleration of orthodontic tooth movement with adjunctive MOPs therapy during the alignment phase does not exacerbate EARR in patients with moderate crowding of the upper labial segment in comparison with controls.

• The Journal of the Korean dental association
• /
• v.56 no.12
• /
• pp.695-706
• /
• 2018

Objectives: The purpose of this study was to investigate the ratio of 4 root canals and the incidence of Radix Entomolaris in mandibular first molars and find out anatomical difference according to number of roots by analysis of cone-beam CT images in a Korean population. Materials and Methods: Total 142 images containing mandibular first molars were selected from CBCT images taken from 2013 to 2017 at Gangneung-Wonju National University Dental Hospital. After reconstructing the image with reference to the Cemento-enamel junction, the root canals were detected at the bottom of the pulpal floor and the number of roots and root canals were analyzed. Various lengths and MLO-DLO-DBO angle were measured between each canal orifices and the external contour line of the tooth, and the distolingual canal wall thickness was measured. Student t-test was used for statistical significance. Results: Among the total 142 teeth, 4 canals were 42.2% and Radix Entomolaris was 25.3%. As the results of measuring various lengths and the angle, the distolingual canal orifice in Group 2(with Radix Entomolaris) tends to deviate to the lingual side than the mesiolingual canal orifice and to the mesial side than the distobuccal canal orifice. Besides, thickness of the distolingual canal wall in Group 2(with Radix Entomolaris) was significantly thinner than that of Group 1 at every level except pulpal floor level. Conclusion: It is necessary to consider the difference according to the presence of Radix Entomolaris in endodontic treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.325-330
• /
• 1989

This study was undertaken to assess the effects of seed treatment and soil moisture content on mesocotyl elongation in rice seedlings. The effect of the high temperature pre-treatment on the mesocotyl elongation was 7 times as great as the control (non treatment). The mesocotyl lengths were of maximum value at the 8％ soil moisture, but of minimum value at the 16％ soil moisture plot, showing decreasing trend of mesocotyl length as soil moisture increases. The mesocotyl elongations were much greater at the ABA treated plot than at the GA$^3$, IAA and Kinetin plots. The relationship between the mesocotyl and excised root elongations was not evident, but the weight of excised roots became heavier with longer mesocotyl length.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.757-767
• /
• 1995

This experiment was done to determine the optimum concentration of IAA for root development in plants regenerated from the callus culture of barley embryos. Two concentrations of 2,4-D, 3ppm and 5ppm selected as an optimum among five different concentrations in the previous experiment were used for callus induction and proliferation in this experiment. For callus induction, 3ppm of 2,4-D produced 35.6% in immature embryos and 4.4% in mature embryos, while 5ppm gave 33.8% in immature and 5.6% in mature embryos. Out of 320 immature embryos cultured, 111 embryos were induced to calli and 684 plants were produced from them, while only 16 embryos were induced to calli from 320 mature embryos and 92 plants were restored. The rates of callusing and plant regeneration were 34.7%, 214% in immature embryos and 5.0%, 28.7% in mature embryos, respectively. The average root lengths and root numbers of plants restored from callus at five different IAA concentrations of 0ppm, Ippm, 5ppm, l0ppm and 30ppm were 7.9mm, 3.6; 18.4mm, 5.2; 16.1mm, 3.9; 8.5mm, 3.5 and 6.4mm, 3.4, while plants directly obtained from mature embryos were 14.8mm, 4.9; 4.9mm, 3.6; 4.3mm, 3.1; 3.6mm, 2.6 and 3.2mm, 2.1, respectively. Therefore, 1ppm gave the best result for the root. promotion in callus, whle 0ppm, a control, gave the largest root developmemt in embryos. High concentration of lAA(30ppm) in callus and any exogeneous supplement of lAA in embryos negatively affected to the root lengths and root numbers. Genotypic effect was also observed in given four varieties, Bruce, Klages, Olbori and Albori. For chromosome doubling, when 0.1% colchicine was applied on 428 plants under three different conditions such as air circulation, temperatures and growth stages, 319 plants of doubled haploids were obtained so that the rate was 74.5%