• 한국작물학회지
• /
• 제51권4호
• /
• pp.295-297
• /
• 2006

Potassium (K) distribution in rice (Oryza sativa L.) root was studied by confocal laser microscopy, using potassium sensitive fluorescent dye potassium-binding benzofuran isophthalate (PBFI). Significantly high intensity of K-specific fluorescence was detected at the root cap region followed by meristematic and basal regions. A negligible or fainted fluorescence was observed at the root hairs area. These results suggest that K is heavily distributed in the apical area of rice root, which may be required in higher concentration for division and extension of cells, as it is the rapidly growing region of the root, moreover, may also be involved in water uptake by creating osmotic gradient across membranes.

• 한국식품과학회지
• /
• 제25권5호
• /
• pp.417-420
• /
• 1993

건조방법을 달리한 께묵(Hololeion maximowiczii) 뿌리의 색도변화에 대해서 조사하였다. Hunter value에서 분말의 경우에는 HADB가 더 진한 편이었으나 용액의 경우에는 HADB가 제일 연한 색깔을 띄었다. 수용액 색소의 420nm에서의 흡광도는 FD group이, 자외부에서 흡광도는 HADB group이 가장 강하였다. 께묵의 색소는 분말상태에서보다 용액상태에서 더 불안정하였으며, 색소분해에 대한 활성화에너지는$(90{\sim}100^{\circ}C)$ 약 20.9kcal/mole이었다.

• Journal of Welding and Joining
• /
• 제3권2호
• /
• pp.52-63
• /
• 1985

Fillet welded joints, specially in ship structure, are well known the critical part where stress concentrate or crack initiates and grows. This paper is concerned with the study of the behavior of fatigue crack growth t the root and toe of load carrying cruciform fillet welded joints under three points bending by the determination of stress intensity factor from the J-Integral, using the Finite Element Method. The stress intensity factor was investigated in accordance to the variation of the weld size (H/Tp). weld penetration (a/W) and plate thickness (2a'/Tp). As mixed mode is occurred on account of shearing force under the three points bending, Stern's reciprocal theory is applied to confirm which mode is the major one. The main results may be summarized as follows 1) The calculation formula of the stress intensity factor at the both of root and toe of the joint was obtained to estimate the stress intensity factor in the arbitrary case. 2) The change of stress field around crack tip gives much influence on each other at the roof and toe as H/Tp decreases. 3) Mode I is a major mode under the three points bending.

• Journal of Ginseng Research
• /
• 제4권2호
• /
• pp.197-221
• /
• 1980

Habitat observation, cultural experience of old and present plantation, weather factors in relation to crop stand and water physiology of root and leaf were reviewed. According to habitat observation ginseng plants love water but plate wit talus well grow at drained place with high moisture content in air and soil while ginseng plants were not found in dry or wet place. According to cultivation experience ginseng plants require abundant water in nursery and main field but most old planters believe that ginseng plaints are draught-loving thus require little water. The experience that rain especially in summer i.e unfavorable might be due to mechanical damage of leaves arid leaf disease infection, or severe leaf fall which is caused by high air temperature and coinsided with rain. According to crop stand observation in relation to weather factors abunsant water increased each root weight but decreased total yield indicating tile increase of missing root rate. Rain in summer was unfavorable too. Though rain in June was favorable for high yield general experience that cloudy day and rain were unfavorable might be due to low light intensity under shade. Present leading planters also do loot consider the importance of water in main field. Water content is higher in top than in root and highest in central portion of root and in stem of top. For seedling the heavier the weight of root is tile higher the water content while it reveries from two years old. Water potential of intact root appeared to be -2.89 bar suggesting high sensitivity to water environment. Under water stress water content severly decreased only in leaf. Water content of leaf appeared to be 78% for optimum, below 72% for functional damage and 68% for perm anent wilting. Transpiration or curs Principally through stomata in lower side of leaf thus contribution of upper side transpiration decreased with the increase of intensity. Transpiration is greater in the leaves grown under high light intensity. Thus water content is lower with high light inte nsity under field condition indicating that light is probable cause of water stress in field. Transpiration reached maximum at 10K1ut The decrease of transpiration at higher temperature seems to be due to the decrease of stomata aperture caused by water stress. Severe decrease of photosynthesis under water stress seems to be principally due to functional damage which is not caused by high temperature and Partly due to poor CO2 supply. Water potential of leaf appeared to be -16.8 bar suggesting weakness in draught tolerance. Ginseng leaves absorb water under high humidity. Water free space of leaf disc is %mailer than that of soybean leaf and water uptake appears to be more than two steps.

• Restorative Dentistry and Endodontics
• /
• 제44권1호
• /
• pp.9.1-9.9
• /
• 2019

Objectives: The aim of this study was to compare postoperative pain intensity after root canal treatment with One G (OG) vs. R-Pilot (RP) files used for glide path preparation. Materials and Methods: Ninety-three single-canaled mandibular premolar teeth with asymptomatic non-vital pulp were randomly assigned into 3 groups (n = 31): OG, RP, or without glide path (WGP). After creating the glide path, the root canals were prepared using sequential Mtwo rotary files to size 30/0.05. One endodontic specialist carried out single-visit endodontic treatment. The patients were asked to rate the severity of postoperative pain on a visual analogue scale at 24, 48, and 72 hours after the visit. They were also asked to record their intake of prescribed analgesics taken. The data were analyzed using the ${\chi}^2$, Friedman, Kruskal-Wallis, and Mann-Whitney U tests. Results: In all 3 groups, postoperative pain decreased significantly at each time interval (p < 0.05). At 24 hours, the OG group had less postoperative pain than the WGP group (p < 0.05). However, no significant difference was found between the RP group and the others. No statistically significant difference was found among the WGP, OG, and RP groups in postoperative pain intensity at 48 or 72 hours or in analgesic tablet intake at the 3 assessed time intervals. Conclusions: The OG group had less postoperative pain than the WGP group in the first 24 hours. The OG and RP systems were similar regarding postoperative pain intensity and analgesic intake.

• Structural Engineering and Mechanics
• /
• 제30권3호
• /
• pp.317-330
• /
• 2008

Stress intensity factors for a planar crack parallel to a bimaterial interface are considered. The formulation leads to a system of hypersingular integral equations whose unknowns are three modes of crack opening displacements. In the numerical analysis, the unknown displacement discontinuities are approximated by the products of the fundamental density functions and polynomials. The numerical results show that the present method yields smooth variations of stress intensity factors along the crack front accurately. The mixed mode stress intensity factors are indicated in tables and figures with varying the shape of crack, distance from the interface, and elastic constants. It is found that the maximum stress intensity factors normalized by root area are always insensitive to the crack aspect ratio. They are given in a form of formula useful for engineering applications.

• 임산에너지
• /
• 제21권3호
• /
• pp.46-53
• /
• 2002

본 연구에서는 인공피음에 의해서 광조건을 3단계로 달리하여 생육시킨 펜둘라자작나무, 층층나무, 물푸레나무를 대상으로 생장량과 물질생산량 등 특성을 조사하여 생리ㆍ생태적 특성을 밝히고자 연구를 실시하였다. 인공피음처리에 따른 조사 대상 수종의 묘고생장 차이는 거의 없었으며, 근원직경의 생장은 전광처리구가 투광율 7-10%의 피음처리구보다 상대생장율이 29-32% 이상 우수한 생장율을 나타냈다. 하지만 층층나무의 근원직경생장은 투광율 26-34% 처리구에서 높은 생장율을 나타냈다. 대부분의 수종에서 피음처리 수준에 따른 광량감소와 함께 총 물질생산량도 감소하였고, 잎과 줄기의 비율이 뿌리에 비해 증가하는 경향을 보였다. 유묘의 T/R율은 대부분의 수종이 피음의 강도가 강할수록 T/R율이 높아지는 경향으로 전광처리구의 0.51∼l.13보다 투광율 7-10%의 강피음처리구가 1.00∼2.27로 높게 나타냈다. 전체적으로 비교할 때 인공피음처리에 의한 광량이 감소할수록 SLA, LAR, LWR은 광환경의 변화에 따른 피음의 강도가 강할수록 통계적으로 유의적인 차이를 보이며 증가하였다.

• 한국수자원학회논문집
• /
• 제33권2호
• /
• pp.263-276
• /
• 2000

본 논문은 인천지방에서의 확률강우량과 확률강우강도식을 유도하기 위하여 인천기상대에서 관측된 자료로부터 강우 지속기간 10분 ~ 6시간까지의 연최대강우량을 선정하였다. 12개 강우지속기간별 확률강우량을 추정하기 위하여 11개 확률분포형을 적용하였으며 Chi-square 검정방법, Kolmogorov-Smirnov 검정방법, Cramer Von Mises 검정방법으로 적합도 검정과 함께 도시적 해석법으로 가정 적합한 분포형을 결정하였다. 확률강우도식은 최소자승법을 사용하여 Talbot 형, Sherman 형, Japanese 형의 3가지로 분석하고, 최소자승법과 함께 시산법을 사용하여 통합형I과 통합형II의 형태로 결정하였다. 표준제곱근오차와 계산된 강우강도와 추정된 강우강도와의 차이를 분석하여 단기 강우 지속기간에 관한 통합형I의 확률강우강도식을 인천지방 강우강도공식으로 제안하였다.

• Agricultural and Biosystems Engineering
• /
• 제2권2호
• /
• pp.75-80
• /
• 2001

This paper describes method to diagnose abiotic stresses such ad low root temperature, low light intensity and high salinity in cucumber plants with several physiological instruments. The stresses could be detected by measuring and analyzing the differences in chlorophyll content, temperature difference between leaf and atmosphere and light absorptance at wavelengths of 480, 560, 710, 1420 and 1650nm. It was concluded that the stresses could be first diagnosed from the 3rd to 10th day after treatment and the overall accuracy of diagnosis was estimated between 25 and 75%. near-infrared spectrometer showed better and earlier detection than the other instruments investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.585-590
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.