• Geomechanics and Engineering
• /
• v.34 no.6
• /
• pp.697-726
• /
• 2023

Brittleness as an important property of rock plays a crucial role both in the failure process of intact rock and rock mass response to excavation in engineering geological and geotechnical projects. Generally, rock brittleness indices are calculated from the mechanical properties of rocks such as uniaxial compressive strength, tensile strength and modulus of elasticity. These properties are generally determined from complicated, expensive and time-consuming tests in laboratory. For this reason, in the present research, an attempt has been made to predict the rock brittleness indices from simple, inexpensive, and quick laboratory test results namely dry unit weight, porosity, slake-durability index, P-wave velocity, Schmidt rebound hardness, and point load strength index using multiple linear regression, exponential regression, support vector machine (SVM) with various kernels, generating fuzzy inference system, and regression tree ensemble (RTE) with boosting framework. So, this could be considered as an innovation for the present research. For this purpose, the number of 39 rock samples including five igneous, twenty-six sedimentary, and eight metamorphic were collected from different regions of Iran. Mineralogical, physical and mechanical properties as well as five well known rock brittleness indices (i.e., B₁, B₂, B₃, B₄, and B₅) were measured for the selected rock samples before application of the above-mentioned machine learning techniques. The performance of the developed models was evaluated based on several statistical metrics such as mean square error, relative absolute error, root relative absolute error, determination coefficients, variance account for, mean absolute percentage error and standard deviation of the error. The comparison of the obtained results revealed that among the studied methods, SVM is the most suitable one for predicting B₁, B₂ and B₅, while RTE predicts B₃ and B₄ better than other methods.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.77-82
• /
• 2007

The general composition like moisture content, and the physical and sensory characteristics of the steamed rice cake added with powder of roots of balloonflowers were as follows. The moisture content in the roots was 4.13${\pm}$0.01%, crude protein 9.24${\pm}$0.11%, crude fat 3.07${\pm}$0.04%, crude fiber 33.82${\pm}$0.01%, and crude ash 8.16${\pm}$0.02%. The moisture content of the cake was decreased with increase of the root’s powder added. In physical characteristic, the hardness of the cake was increased with increase of the powder. The control cake was the highest in the cohesiveness. The springiness tended to be increased with increase of the powder. The gumminess was higher with increase of the powder, being 530.33% in the control and 284.44% in the sample with 12.0% powder added. The adhesiveness was decreased with increase of the powder. The color change was significantly decreased with increase of the powder. With increase of the powder, the value a was decreased, while the value b showed to be increased. In a sensory test, the favorite degree to color, flavor, bitter taste, moistness, soft-ness and overall acceptability was measured to get the follow result. To color, the lot with 6% of the balloonflower powder added showed the highest accept-ability with the same highest result also to flavor and bitter taste. The moistness and the softness were revealed as the highest at the control, and the chewiness was also highest at the lot with 3% of the powder added. The overall acceptability was highest as 5.75 at the lot with 6% of the powder added, coming out to be higher in order of the 3% added-lot, the control, the 9%-lot and the 12%-lot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.24-31
• /
• 2000

This study was conducted to determine the effect of soil physical characteristics on rhizome rot incidence of platycodon. Sampling sites were Keochang 4, Kimhae 7, Haman 6, Chinju 6 and Koseong 3 fields in Kyongnam province and Hongcheon 6 fields in Kangwon province. The root disease incidence rate was correlated with soil depth Y=-0.747X+88.19($R^2=0.394^{***}$), soil hardness Y=4.36X+8.93($R^2=0.201^*$), bulk density Y=104.7X-80.99($R^2=0.295^{**}$), clay content Y=1.24X+14.14($R^2=0.196^*$), porosity Y=-3.11X+215.9($R^2=0.220^*$) and silt content Y=-0.75X+67.85($R^2=0.178^*$). The yield was correlated with soil depth Y=0.263X+0.971($R^2=0.105^*$), clay content Y=-0.688X+32.74($R^2=0.158^*$), porosity Y=1.974X-93.19($R^2=0.231^{**}$) and silt content Y=53.05X-108.65($R^2=0.232^*$), The optimum cultivated land of perennial platycodon was soil depth over 1m, soil hardness under $5kg\;cm^{-2}$, bulk density $1.0Mg\;m^{-3}$, moisture content 13~17%. clay content 5~10%, porosity 58~63%, silt content 38~64% and soil texture of silt loam.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.88-94
• /
• 2012

Purpose: The use of appropriate instruments to clean surfaces with minimal change, is critical for the successful maintenance of a dental implant. However, there is no consensus about the type and methodology for such instruments. The aim of this study was to characterize changes in the roughness of titanium surfaces treated by various scaling instruments. Methods: Thirty-seven identical disks (5 mm in diameter) were investigated in this study. The specimens were divided into eight groups according to the types of instrumentation and the angle of application. Ultrasonic scaling systems were applied on a titanium disk to simulate standard clinical conditions. The equipment included a piezoelectric ultrasonic scaler with a newly developed metallic tip (NS group), a piezoelectric ultrasonic scaler with a conventional tip (CS group), a piezoelectric root planer ultrasonic scaler with a conventional tip (PR group), and a plastic hand curette (PH group). In addition, the sites treated using piezoelectric ultrasonic scaler systems were divided two sub-groups: 15 and 45 degrees. The treated titanium surfaces were observed by scanning electron microscopy (SEM), and the average surface roughness (Ra) and mean roughness profile depth (Rz) were measured with a profilometer. Results: SEM no significant changes in the titanium surfaces in the NS group, regardless of the angle of application. The PH group also showed no marked changes to the titanium surface, although some smoothening was observed. All CS and PR sites lost their original texture and showed irregular surfaces in SEM analysis. The profilometer analysis demonstrated that the roughness values (Ra and Rz) of the titanium surfaces increased in all, except the PH and NS groups, which showed roughness decreases relative to the untreated control group. The Ra value differed significantly between the NS and PR groups (P<0.05). Conclusions: The results of this study indicated that changes in or damage to titanium surfaces might be more affected by the hardness of the scaler tip than by the application method. Within the limitations of this study, the newly developed metallic scaler tip might be especially suitable for peri-implant surface decontamination, due to its limited effects on the titanium surface.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.65-72
• /
• 1988

This study was conducted to examine the effects of trampling intensity and frequency on the change of forest bed soil and vegetation by experimental trampling. 23 experimental lanes($0.3{\times}5.0m$) were established at non-trampled Quercus acutissima stand in Suweon, Gyunggi-Do, Korea. And soil compaction and ground vegetation were examined during and after 4 weeks trampling. Increasing in trampling intensity resulted in decreasing increment rate of soil compaction and after 400 passes of trampling, soil hardness showed $11.32kg{\cdot}cm^{-2}$, (23.8mm) which affected root growth badly. At the same trampling intensity, soil compaction was high where trampling was spread over a longer period of time. The difference of soil compaction by trampling frequency was not significant below 200 passes, but 16X(every other day trampling) type resulted in the highest soil compaction over 400 passes of trampling intensity. The relative coverage of vegetation was more severely decreased than the relative density by trampling, 16X type of Trampling frequency resulted in most servere vegetational change and difference among trampling frequencies showed significance in case of 200 passes, contrasting to soil compaction.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.92-97
• /
• 1983

This experiment was designed to establish the soil physical improvement practice to increase the rice yields at fine textured fluvio-marine paddy field. After chiseling and trenching the paddy soil, the rice growth and soil physical properties were investigated for 4 years. The results are summarize as follows; 1. The soil physical properties, such as bulk density, hardness, porosity and permeability were prominently improved by trenching and chiseling. 2. There were significant relationships among the soil physical properties, root developments and rice yields. 3. The increasing rates of rice yields by soil physical improvement were about 10%, which is better than 5% of drainage effects. 4. The effects of trenching and chiseling on rice yields were continued to fourth year. Even if trenching effects was better than chiseling the chiseling was considered as a useful treatment for its simple working practice by using a heavy machine. 5. In case of trenching, straw application were increased the rice yields.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.4
• /
• pp.439-445
• /
• 1997

Radish roots were salted in 4 different salt concentrations (5, 10, 15, 20%) for 3 months followed by desalting. The effects of desalting process on salt concentration, Ca content, texture and sensory characteristics were investigated during 3 days of desalting period at $25^{\circ}C$. NaCl content in danmuji salted in lower NaCl concentrations decreased rapidly and a linear relationship was found between the decrease in NaCl content and the logarithmic value of desalting time. Changes in Ca content of danmuji also exhibited a similar trend to that of NaCl content. Hardness of radish root tended to increase wit an increase in desalting time up to 2 days of desalting and then decreased slightly at the 3rd day of desalting. The results of sensory evaluation revealed that regardless of salt concentration used acidic, salty odor and taste of danmuji decreased significantly during desalting, however, there was very little change in yeast-moldy odor and taste with the intensity being very low in danmuji salted in higher salt concentrations. Among the textural properties, the crispness of danmuji salted in 5, 10 and 20% NaCl concentrations increased up to 2 days of desalting and decreased slightly thereafter, whereas that of radish salted in 15% NaCl concentration increase continously during 3 days of desalting. Total acceptibility was best in danmuji salted in 20% NaCl concentration and desalted for 3 days.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.129-134
• /
• 2012

Research was focused on the improvement of poor drainage problems on golf course fairway which had not been performed soil test or properly amended during the course construction. The analysis of the drainage problem basically was caused by a deterioration of soil physical properties by the top layer compaction. The soil hardness reached about 3,000 Kpa around 5~6 cm of soil profile. The slow infiltration speed to subsoil by the compaction was caused directly a poor drainage capacity. However, the properly amended sand soil showed an apparent value of 1,500 Kpa through the subsoil. The water content test showed a similar result that higher rate of 20~30% and ideal rate of 8~12% at poor drainage area and successfully amended area, respectively. However, an imported topsoil media which had higher content of silt and clay from a trans-planted sod had made a heterogeneous soil profile and that caused a poor drain capacity by a low infiltration rate. Those drainage problems triggered to buildup a reduced soil layer by poor soil gas exchange. The soil environment of deoxidation enhanced anaerobic microbial population and induced methane gas build-up to 55 ppm, and that resulted an adverse effect on turf growth by root growth retardation, consequently.

• Korean Journal of Environment and Ecology
• /
• v.2 no.1
• /
• pp.50-65
• /
• 1988

Trail and campground deteriorations and their environmental changes of soil and vegetation were studied in Guryong district of Mt. Chiak National Park in 1988. The Widths of both the entire trail and the bare portion as the trail condition were significantly greater on the more heavily used trail. and regressions showed the significant positive relationship between slope along the trail and maximum depth of the trail($R^2$=0.35). Deterioration types of trail which had higher frequency for a total of 63 observations were rock exposure(48%), trail deepening(29%) and root exposure(27%) in the high order. And occurence of trail deterioration was considerably influenced by slope along the trail Ecological changes of soil and vegetation of trailsides were not found at a uniform tendency but could be grouped, by the types of user's disturbance. On campsites. tree damage types and their frequencies were basic as a means of which grasp the limits of user's impact. The area with damaged trees on campsite in pine forest were larger than that in mixed forest and the frequency by damage type of trees varied according to the distance from the core of campsite and to the crown layer. Water content, pH and hardness of soil. coverage of lower trees, species and individuals per 100$m^2$, basal areas of upper and middle layer of trees had significant relationship with the distance from campsite to forest. The range influenced by user's disturbance was more than 70-80m, md Staphylea bumalda, Morns bombycis, Stephanandra incisa and Securinega suffruticosa were considered as tolerant species to user's impact.