• Journal of Welding and Joining
• /
• 제1권1호
• /
• pp.37-46
• /
• 1983

This paper describes a study of fillet welded joint stressed perpendicular to the weld line. The finite element method was used to determine the stress intensity factor for cruciform joint at weld toe and root cracks according to variation of H/Tp, weld angle and main plate thickness. But, in this study, weld angle was fixed at 45.deg., since the variation of weld angle affect the stress intensity factor little, also main plate thickness was fixed. Pulsating tension fatigue test was done at the second phase of experiment. The work using the concepts of the fracture mechanics on the stable crack growth, was in the correlation of the experimental fatigue stress-life behavior because the fatigue behaviors of various joint geometries are related to the stress intensity factors calculated by F.E.M. analysis. Main results obtained are summarized as follows. 1) According to the propagation of toe crack, the variation of the stress intensity factor at root crack is obvious as H/Tp is smaller. 2) According to the propagation of root cracks, the change of the stress intensity factor of the toe is very large with propagation of root crack. 3) The calculation formula of the stress intensity factor of crack propagation at the root crack was obtained. 4) The calculation formula of the stress intensity factor at the toe cracks was obtained in similar manner. 5) From the results of experiment, the velocity of fatigue crack propagation at the weld toe and root was estimated.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.298-304
• /
• 2001

Turbine blade is subject to force of three types ; the torsional force by torsional mount, the centrifugal force by the rotation of rotor and the cyclic bending force by steam pressure. The cyclic bending force was a main factor on fatigue strength. SEM fractography in root of turbine blade showed micro-clack width was not dependent on stress intensity factor range. Especially, fatigue did not exist on SEM photograph in root of turbine blade. To clear out the fracture mechanism of turbine blade, nanofractography was needed on 3-dimensional crack initiation and crack growth with high magnification. Fatigue striation partially existed on AFM photograph in root of turbine blade. Therefore, to find a fracture mechanism of the torsion-mounted blade in nuclear power plant, the relation between stress intensity factor range and surface roughness measured by AFM was estimated, and then the load amplitude ΔP applied to turbine blade was predicted exactly by root mean square roughness.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.97-102
• /
• 2008

It is well known that there exist two typical fatigue crack initiation locations in ship structures: one is the weld toe and the other is the weld root where partial penetration weld is performed. In particular, it is important for fillet weldments to avoid weld root cracking in order to prevent catastrophic failure particularly in ship structures. Therefore detail considerations are required for cruciform joints with partial penetration when there is a possibility of weld root crack initiation. For these reasons, fatigue tests on welded joints were performed in this study. Concept of stress intensity factor(SIF) by means of fracture mechanics is applied for predicting fatigue life of fillet welded joints.

• 한국농림기상학회지
• /
• 제14권4호
• /
• pp.269-276
• /
• 2012

작물모형 평가에 사용되거나 사용할 수 있는 9가지 지표를 소개하였으며 이들의 특징은 다음과 같다. efficiency of model (EF)와 index of agreement (d)은 dimension이 없고 관측수(n)에 의존적이지 않았으며, dimension에 대해서만 자유로운 것은 relative root mean square error (RRMSE), bias factor (Bf)와 accuracy factor (Af)이다. Root mean sqruar, mean error, mean absolute error들은 관측수와 dimension에 영향을 받기 때문에 판단 시 주의가 필요하다. 따라서 이들의 특징을 파악하여 목적에 맞게 모형의 성능을 파악하여야 한다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.64-72
• /
• 1976

This experimental work was carried out to investigate the fatigue bending strength on various shapes and sizes of notches of the domestically manufactured steel plate. The notch types tested were a circular hole, U-and V-notches. The S-N diagram for different notch shapes were discussed in relation to plan bending strength and stress concentration factor of notches .The results of the experiments are summarized as follows : (1) The difference between stress concentration factor and notch factor was greater as the radium of notch root became smaller, and these values approached to an identical value as the radium of notch root increased. (2) It was shown that the plane bending fatigue limit of bar without notch for the hotrolled steel having the tensile strength of 33.1kg/$mm^2$was 17.0kg/$mm^2$. (3) U-and V-notch had a greater effect of stress concentration factor on the endurance limit, but O-hole showed the same effect only for $\o\pm2mm$. (4) For the same radius of notch root, U-notch showed a lower value of fatigue limit compared to V-notch and O-hole.

• 한국지반신소재학회논문집
• /
• 제15권2호
• /
• pp.13-24
• /
• 2016

얕은 토층의 무한사면 파괴가 예상되는 지역에서 안전율 계산에 영향을 주는 지역적 특징인 뿌리점착력을 고려하지 않은 무한사면 안전율은 뿌리점착력을 적용한 무한사면 안전율 보다 낮은 수치로 해석되는 경향이 있다. 따라서 합리적인 무한사면의 안전율을 계산하기 위하여 지역적 특징을 반영한 안전율 해석이 필요하다. 본 연구에서는 수목의 뿌리와 수관밀도가 무한사면의 안전율에 미치는 영향을 분석하기 위하여 기존 무한사면 안정해석 방법에 수관밀도를 고려한 뿌리 점착력 이론을 적용하여 안전율의 변화를 비교 분석하였다. 해석결과 뿌리점착력의 효과로 인하여 안전율이 증가하지만, 사면의 경사에 따라서 안전율의 증가량이 다른 것으로 분석 되었으며, 뿌리점착력의 보강 효과는 완만한 경사의 사면일수록 커지는 것으로 나타났다.

• 한국식품영양학회지
• /
• 제6권2호
• /
• pp.109-114
• /
• 1993

This study was divised to observe an Inhibitory effect toward a lipolytic action of toxohormone-L from large root and small root Nepal pseudo ginseng (NPG ; Nepal products) components by water extract and ethanol precipitate in vitro. Toxohormone-L is known to be a lipolytic factor that was partially purified from the ascites fluid of Sarcoma 180-bearing mice and of patients with hepatoma. The inhibitory effect that inhibited the lipolytic action of toxohormone-L by ethanol Precipitate component of large root NPG (mean 55.5%) was higher (mean 1.37 times) than that of water extract component in final reaction concentration of 500 and 1, 000ug/ml, on the other side inhibitory effect of water extract component in small root NPG (mean 55.5%) was higer (mean 1.14 times) than that of ethanol precipitate component. In a way inhibitory effect of precipitate component In large root NPG(47.6%), when final reaction concentration of sample were 1, 000ug/ml, was about 40% lower than that of Korean red ginseng.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.26-37
• /
• 1994

A kinematically admissible velocity field for the numerical analysis of closed-die forging process of spur gear is proposed. The velocity field is divided into three regions of deformation. In the analysis, the involute curve is approximated to be straight line and the upper-bound method is used to calculate energy dissipation rate. A constant frictional frictional factor has been assumed on the contacting surfaces. The effects of root diameter, number of teeth, and friction factor are determined on the relative forging pressure. The frictionless relative pressure is independent of root diameter for the same number of teeth, but increases with the number of teeth on a given root diameter. In the presence of friction, the relative forging presure increasing root diameter at the start of forging, but decreases with increasing root diameter in the processing of forging.

• 한국작물학회지
• /
• 제43권1호
• /
• pp.28-31
• /
• 1998

Nodule development was regulated partially by host plant factors originating in the shoots and roots. This study was performed to identify the origin of the factors regulating nodulation in supernodulating soybean (Glycine max [L.] Merr.) mutant 'SS2-2' which was isolated recently from ethyl methanesulfonate (EMS) mutagenesis of 'Sinpaldalkong 2'. Self- and reciprocal-grafts were made among three soybean genotypes which consisted of two supernodulating mutants, SS2-2 and 'nts 382', and a normal nodulating Sinpaldalkong 2. Self-grafted supernodulating mutants were characterized by greater nodule number, nodule dry weight, and $C_2$H$_2$ reduction activity than self-grafted wild types. They were also characterized by relatively higher nodule to root dry weight. Significant shoot genotypic effects were observed on nodule number, nodule dry weight, and $C_2\;H_2$ reduction activity per plant, whereas varying root genotypes had no effects. From this result, it is surmised that supernodulating characters are controlled by a graft-transmissible shoot factor, and mutant SS2-2 may have similar nodulation mechanism to the former supernodulating nts 382. In all grafts, both supernodulating mutants and Sinpaldalkong 2 maintained the similar balance between above ground and below ground parts regardless of significant differences in partitioning of dry matter into root and nodule between supernodulating mutants and Sinpaldalkong 2.

• 대한한의학방제학회지
• /
• 제16권2호
• /
• pp.219-228
• /
• 2008

Objective : The present study was designed to investigate whether the water extract of the root of Scutellaria baicalensis could regulate lipopolysaccharide (LPS)-induced type 1 interferon. Methods : To evaluate of type 1 interferon inhibitory effect of the root of Scutellaria baicalensis, we examined type 1 interferon in LPS-stimulated RAW264.7 cells. Furthermore, Interleukin (IL)-10 and interferon regulatory factor (IRF) - 1, 7 expression level were examined to study the inhibition mechanisms. Results 1. Extract from the root of Scutellaria baicalensis didn't have any cytotoxity itelf. 2. Extract from the root of Scutellaria baicalensis inhibited interferon-a,b in dose dependant- and type 1 interferon production in time dependant manner. 3. Extract from the root of Scutellaria baicalensis reduced IL-10 and IRF-1, 7 production in LPS-stimulated RAW 264.7 cells. Conclusion : The extract from the root of Scutellaria baicalensis down-regulated LPS-induced type 1 interferon through suppression of IL-10 and IRF-1, 7 expression. This results suggested that the extract from the root of Scutellaria baicalensis may be a beneficial drug against inflammatory diseases.