• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.4
• /
• pp.271-280
• /
• 2016

Predicting cutting forces in machine tools is essential to productivity improvement and process control in the manufacturing field. Furthermore, milling machining is more complicated than turning machining. Therefore, several studies have been conducted previously to simulate milling forces; this study aims to simulate the cutting forces in milling machines using multi-layered neural networks. In the experiments, the number of layers in these networks was 3 and 4 and the number of neurons in the hidden layers was varied from 20 to 200. The root mean square errors of simulated cutting force components were obtained from taught and untaught data for the various neural networks. Results show that the error trends for untaught data were non-uniform because of the complex nature of the cutting force components, which was caused by different cutting factors and nonlinear characteristics coming into play. However, trends for taught data showed a very good coincidence.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.5
• /
• pp.354-359
• /
• 2020

Background: The recent, decline in Black-berry Magnolia Vine (Schisandra repanda; BMV) native to Jeju Island, Korea, has raised concerns about the causes of this decline. We investigated the native environment of S. repanda and evaluated its propagation through cuttings to provide preliminary data for its restoration in Jeju Island. Methods and Results: The native environment of the BMV in the Hallasan National Park was surveyed and the climatic variables (temperature and humidity) were analyzed. The effects of the sex of the donor plant (male/female) type of cutting (softwood/hardwood), and treatment with a plant growth regulator (indole-3-butylic acid/rootone) on the rooting of BMV were investigated. Additinallly, the rooting rate, root count, and root length, as well as temperature and humidity were measured in the vinyl moist chambers. BMV was observed in 63 plants distributed from 567 m to 1,364 m above sea level of the Hallasan National Park. In the cutting experiment, the rooting rate was 71.9%, and it was higer in female plants (75.0%) than in male plants (68.8%). Conclusions: The mass propagation of BMV through cuttings valuable for its restoration as without such safeguard measures, the population could face extinction within a few decades.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.58-63
• /
• 1993

The charactistics of AE(Acoustic Emission) signal is related to cutting conditions, tool materials and tool geometry in metal cutting. The tool geometry change which is derived from tool wear affects the source of AE signal in machining process. The relationship between AE signal and tool wear was experimentally investigated. THe value of RMS(Root Mean Sequare) and Amplitude of AE signal were increased in tool wear condition. Also the high value of Count per Hit and Count vs. Frequency was observed in this condtion. As a result, tool wear can be effectively detected by AE signal during cutting operation.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.69-76
• /
• 1994

AE(Acoustic Emission) signal is correlated to workpiece material, cutting conditions and tool geometry during metal cutting. The relationship between AE signal and cutting parameters can be obtained by theoretical model and experiments. The value of CR(Count Rate) is nearly constant in stable cutting, but when the chatter vibration occours, the value of CR is rapidly increased due to the vibration deformation zone. By experimental signal processing of AE, it is more effective than by RMS(Root Mean Square) measurement to detect the threshold of chatter vibration by CR measurement.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.244-250
• /
• 2010

This study was carried out to examine the effect of cutting condition on rooting and their subsequent growth of cut flower in plug cutting of 'Shinma', one of autumn-flowering chrysanthemums. According to the results, cutting with four or six leaves was effective in shoot growth and rooting than any other treatments, and also the length and thickness of cut flower were increased. In case of cutting with leafless, it showed the poorest shoot growth among all of the treatments and there was no root. The weight of shoot was heavier than any other treatments in case of the length of cutting (5~7 cm). And the weight of root and its number were better than any other treatments, in treatment of the length of cutting (5 cm). The growth of shoot and rooting were enhanced by increasing the thickness of cutting. In case of thickness of cutting, the cutting (3.2 mm tnickenss) showed more favorable shoot length of cut flower than any other treatment. Therefore, it is recommended that the 5 cm long and 3.2 mm thick cuttings with four leaves are used to improve their rooting and subsequent growth in plug cutting of Dendranthema grandiflorum 'Shinma'.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2001

This research was carried out to establish the large quantity propagation system for Kalopanax pictus using root cutting. The results are as follows. As there was no significant difference in the promotion of adventitious shoot development from the root cuttings of Kalopanax pictus among kinds (IBA, NAA and Kinetin) and concentrations (0 to 2000 mg/L) of growth regulators, no application is recommended, which showed more than 90% of shoot development. Horizontal and vertical placement of rooting showed more than 93% of shoot occurrence, but the latter showed more desirable growth traits in the number of shoot development, number of leaf, petiole length, and leaf length and leaf width Polarity was observed and thus normal vertical placement of root cutting is preferred. However, root cuttings placed upside down showed the shoot development at the distal end, which indicates further sophisticated test is necessary to investigate this phenomenon.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.453-461
• /
• 2008

This study was conducted to develop a root-removed splice grafting system for cucurbitaceous vegetables, mainly watermelon and cucumber seedlings, for the seedlings factories where currently most of seedlings grafting works are carried out by manual works. The major results of the study are as follows. The dimensions of rootstocks and scions, except cotyledon width, of root- removed splice grafting of watermelon and cucumber were shown to be varied within the 2.5-fold range. The growth status of seedlings were not consistent in terms of cotyledon sprouting direction and angle which were considered as one of the important factors for in root-removed splice grafting. The grafting work of root-removed splice for grafted watermelon and cucumber could be divided by four sub-operations: seedling supplying, cutting, clipping and potting, while a part or all root of the rootstock was removed in the seedlings supplying operation. The cutting angles of the rootstock and scion were $34-45^{\circ}$ and $20-45^{\circ}$, respectively, while the stem length of the scion varied from 6 mm to 12 mm. The splices of rootstock and scion were heaped up in parallel and then fixed by a clip. It indicated that the ideal grafting system, adopting conventional grafting processes of seedlings specifications as well as conventionally manual root-removed splice grafting method, performed very well for seedlings gripping and transporting, supplying clip, clipping and discharging grafted seedlings while workers supplied seedlings to the semi-automatical system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.201-206
• /
• 1999

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.11 no.1
• /
• pp.31-37
• /
• 1991

Acoustic emission(AE) signals detected during metal cutting were applied as the experimental test to sensing tool wear and chipping on the NC vertical milling machine. The in-process detection of cutting tool wear including chipping, cracking and fracture has been investigated by means of AE in spite of vibration or noise through intermittent metal cutting, then the following results were obtained 1) When the tool wear is increased suddenly, or the amplitude of AE signals changes largely, it indicates chipping or breaking of the insert tip. 2) It was confirmed that AE signal is highly sensitive to the cutting speed and tool wear. 3) At the early period of cutting, the wear were large and RMS value increased highly by the influence of minute chipping and cracking, etc. Therefore, the above situations should be considered for the time when the tool would be changed.