• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.73-84
• /
• 1994

Using a model system that can compare the before and after of canal preparation in the same tooth, we measured the area of the cross section, and canal wall thickness of the distal portion of the mesial root of the mandibular molar, and compared the amount of reduction in the canal using hand flared preparation the Gates-Glidden drill flared preparation according to the changes in the MAF. The results were as follows. 1. After canal preparation, the canal wall thickness had no significant difference between the hand flared preparation and Gates-Glidden drill flared preparation. 2. The canal wall thickness, after canal preparation, there was no significant difference between the sizes of the MAF. 3. The area variation range of each cross section of root had no significant difference between MAF size and methods of canal preparation. 4. After canal preparation, the frequency of the canal wall thickness under 0.5mm showed 3.5mm below the furcation to be the most frequent with statistical significance(p<0.05). 2mm below the furcation and 5mm below the furcation followed but there was no statistical significance. 5. The danger zone of the mesial root of the mandibular molar seems to be around 3.5mm.

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.159-169
• /
• 1993

The thirty six mandibular second molars, which were extracted because of hopeless tooth due to advanced periodontal disease, were measured the length of mesial and distal root and the distance from cementoenamel junction to root separation. The molars were cross-sectioned every 1.5 milimeter from cementoenamel junction to root apex perpendicular to long axis and each section was photographed, projected and measured with a calibrated Digital Curvi-Meter(Com Curvi-8. Japan). The root surface area (RSA), percentage of the RSA and the linear variation of the RSA were calibrated for each 1. 5 mm section. The results were as follows. 1. The mean length of the roots was 12. 98mm for mesial root, 11.84 mm for distal root. The mesial root was longer than distal root.(p<0.01) 2. The mean distance from the cementoenamel junction to the point at which the root separate from the root trunk was 3.82mm for the buccal furcation and 4.75mm for lingual furcation. The buccal root separation was coronal than the lingual root separation.(p<0.01) 3. The total root surface area was $317.78mm^2$. 4. The mean surface area of the root trunk was $150.06mm^2$ and averaged 42.54% of the total root surface area. 5. The mean root surface area was $88.79\;mm^2$ for the mesial root, $78.93mm^2$ for distal root, The mesial root surface area was wider than the distal root surface area.(p<0.05) 6. In comparision, the mean root trunk surface area of the mandibular 2nd molar was wider than that of mandibular 1st molar(p<0.01), but each root of 2nd molar was smaller than that of 1st molar(p<0.01).

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.458-464
• /
• 2001

In this study, the annual growth of roots and their branching forms of Norway spruce(Picea abies [L.] Karst.) were analysed to compare the development of their root in the differently acidified forest soils. And there was no significant difference among the stands for the modified roots and the non-modified roots depending on the root branch forms, and however in the most acidified Weidenbrunnen stand, the modified roots, the abnormal root branch form such as fork, gun and rake types were appeared. As a result of the ring of the root, the annual horizontal root growth were 6.3cm for Weidenbrunnen and Barbis stands and 9.5cm for Eberg$\ddot{o}$tzen stand. The average annual vertical root growth was 4.4cm, 5.4cm, and 6.7cm for Weidenbrunnen stand, Barbis stand, and Eberg$\ddot{o}$tzen stand, respectively. The cross section area by root distribution at 80cm deep showed that the thick and thin roots were evenly distributed in of Eberg$\ddot{o}$tzen stand and the sum of root cross section area was $32.6cm^2$. In Barbis stand, the thick roots were distributed in the center while the thin roots were comparatively rare. And the sum of root cross section area was $29.2cm^2$. In Weidenbrunnen stand, only a few thin roots were found, and the total root cross section area was $10.9cm^2$. The stability coefficient of roots were in the order of Eberg$\ddot{o}$tzen stand(1.04), Barbis stand (0.3), and Weidenbrunnen(0.08) stand. Among the investigated Norway spruce stands, the modified abnormal root branching form and the low root growth appeared in the Weidenbrunnen stand could be attributed by the soil acidification etc.

• Restorative Dentistry and Endodontics
• /
• v.43 no.2
• /
• pp.16.1-16.9
• /
• 2018

Objectives: Understanding the reason for an unsuccessful non-surgical endodontic treatment outcome, as well as the complex anatomy of the root canal system, is very important. This study examined the cross-sectional root canal structure of mandibular first molars confirmed to have failed non-surgical root canal treatment using digital images obtained during intentional replantation surgery, as well as the causative factors of the failed conventional endodontic treatments. Materials and Methods: This study evaluated 115 mandibular first molars. Digital photographic images of the resected surface were taken at the apical 3 mm level and examined. The discolored dentin area around the root canal was investigated by measuring the total surface area, the treated areas as determined by the endodontic filling material, and the discolored dentin area. Results: Forty 2-rooted teeth showed discolored root dentin in both the mesial and distal roots. Compared to the original filled area, significant expansion of root dentin discoloration was observed. Moreover, the mesial roots were significantly more discolored than the distal roots. Of the 115 molars, 92 had 2 roots. Among the mesial roots of the 2-rooted teeth, 95.7% of the roots had 2 canals and 79.4% had partial/complete isthmuses and/or accessory canals. Conclusions: Dentin discoloration that was not visible on periapical radiographs and cone-beam computed tomography was frequently found in mandibular first molars that failed endodontic treatment. The complex anatomy of the mesial roots of the mandibular first molars is another reason for the failure of conventional endodontic treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.38.1-38.10
• /
• 2020

Objectives: This study aimed to evaluate vital pulp tissue removal from different endodontic instrumentation systems from root canal apical third in vivo. Materials and Methods: Thirty mandibular molars were selected and randomly divided into 2 test groups and one control group. Inclusion criteria were a positive response to cold sensibility test, curvature angle between 10 and 20 degrees, and curvature radius lower than 10 mm. Root canals prepared with Hero 642 system (size 45/0.02) (n = 10) and Reciproc R40 (size 40/0.06) (n = 10) and control (n = 10) without instrumentation. Canals were irrigated only with saline solution during root canal preparation. The apical third was evaluated considering the touched/untouched perimeter and area to evaluate the efficacy of root canal wall debridement. Statistical analysis used t-test for comparisons. Results: Untouched root canal at cross-section perimeter, the Hero 642 system showed 41.44% ± 5.62% and Reciproc R40 58.67% ± 12.39% without contact with instruments. Regarding the untouched area, Hero 642 system showed 22.78% ± 6.42% and Reciproc R40 34.35% ± 8.52%. Neither instrument achieved complete cross-sectional root canal debridement. Hero 642 system rotary taper 0.02 instruments achieved significant greater wall contact perimeter and area compared to reciprocate the Reciproc R40 taper 0.06 instrument. Conclusions: Hero 642 achieved higher wall contact perimeter and area but, regardless of instrument size and taper, vital pulp during in vivo instrumentation is not entirely removed.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.338-345
• /
• 2001

This study was conducted to elucidate the relationship between the root structure and the crown structure of Norway spruce(Picea abies [L.] Karst), and thereafter to obtain the regression equation for the estimation of relative root and needle biomass using the tree height and diameter at breast height(DBH) without measurement of root and needle biomass. The study site was Barbis stands of Harz region located in central part of Germany. Five dominant and three co-dominant trees of 30 to 40 year-old Norway spruce were selected and tree height, diameter at breast height, clear bole length, weight of total needle and branch, cross section and sapwood area at breast height for biomass of above ground part and also the length of root, the number of root, the weight of root, the cross section area of root etc. by dividing the horizontal and vertical roots for below ground part of tree were measured. The significantly correlation was shown between the biomass of most of variables of above ground parts and those of below ground parts. For the diameter of breast height to the weight of total root, regression equation was Y = 3.56X - 45.94 and decision coefficient was 0.96 showing highly correlation. The weight of total branches and needles, and the tree height etc. of above ground parts showed highly positive relationship with below ground biomass. The results obtained from this study can be used to the estimating of biomass of below ground using variables of above ground such as DBH in the 30 to 40 year-old Norway spruce stands.

• Restorative Dentistry and Endodontics
• /
• v.29 no.4
• /
• pp.378-385
• /
• 2004

The purpose of this study was to compare the effects of preparation with GT files and profiles .04 in shaping of root canals and reconstruct the three-dimensional root canal system using micro computed tomography 40 canals of the extracted human mandibular molars were used, and randomly distributed into two experimental groups. In group 1. canals were prepared by GT files. In group 2, Profiles .04. were used. Apical preparation size was #30. For each tooth pre and post operative cross-sectional images were obtained by the micro CT at 50 micron intervals. Pre and post operative cross-sectional images of 1, 2, 3, 5, and 8mm from the apex were compared. For each section. canal area and centering ratio were determined. For each tooth pre- and post-operative root canal volume from the furcation to the apex of the roots was calculated by three-dimensional image software. Following results were obtained: 1. At 8mm from the apex, area of dentin removed by GT rotary file was significantly larger than that by Profile .04. And at the other levels there was not a significant difference. 2. There was a trend for GT rotary file to remain more centered in the canals than Profile .04 at all levels. But at 3mm level. there was a statistically significant difference. 3. In root canal volume increments after instrumentation, there was no significant difference between two groups.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.283-293
• /
• 1988

Anatomical features of the secondary xylem were described in the branches, stems, and roots of Salix glandulosa and Quercus variavilis. In Quercus variavilis, the stem shows ring-porous wood, while the root shows diffuse-porous wood. In both species, it is found that the boundaries between the growth rings are not well defined in the roots. Both vessel elements and fibers are the longest in the roots followed by the sterns and the branches in turn and diameter of vessel elements shows the same trend. In cross section, the number of vessels per unit area are the longest in the branches followed by the stems and the roots in turn as well. Perforation plates are simple in both species and their angles are wide in the root, intermediate in the stems, and narrow in the branches. In tangential section, height of rays is taller in the roots than in the stem and branches.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.612-621
• /
• 2002

The purpose of this study was to compare the histomorphological change of curved root canal preparation using GT rotary File, Profile .04 taper and stainless steel K-file. 45 mesial canals(over 20 degree) of extracted human mandibular first molars were mounted in resin using a modified Bramante muffle system and divided into three groups. The roots were cross-sectioned at 2.5mm 5mm and 8mm levels from apical foramen. Tracings of the canals were made from preinstrumentation pictures of the cross section. The canals were prepared using a step-back technique with stainless steel K file(group 1), Profile .04 taper rotary file(group 2) and GT rotary file(group 3). Tracings of the prepared canals were made from postinstrumentation picture. Canal centring ratio. amount of transportation, area of dentin removed and shape of canal were measured and statistically were evaluated with Student-Newman-Keuls test using Sigma Stat(Jandel Scientific Software, USA). The results were as followings : 1 Amount of transportation of group 2 was the lowest at apical part, but there was no statistical difference. The direction of transportation was the outside of curvature at apical part. 2. Centering ratio at the apical part of group 1 was the highest, and there was statistical differences between apical and middle part, apical and coronal part(p＜0.05). Centering ratio at the middle part of group 3 was the lowest, and there was statistical difference between apical and middle part(p＜0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistical difference. 3. Amount of dentin removed of group 1 was the highest at coronal, middle and apical part among three groups, and there was statistical difference(p＜0.05). 4. The majority of the cross-sectioned canal shape after instrumentation were irregular at coronal, middle and apical part. But there are more number of round shaped canals at group 3 than other group.