• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.15-18
• /
• 2008

대공간 구조는 3차원적인 힘의 흐름과 면내력에 의해 외부하중에 대한 저항능력을 확보하는 형태 저항형 구조로서, 구조물 자체의 곡률을 이용하여 면외방향으로 작용하는 외력을 주로 면내력으로 저항할 수 있게한 구조시스템이다. 그러므로, 연성구조물의 일종인 막구조물은 대공간 구조물을 보다 효과적으로 구축할 수 있다. 이러한 막구조물은 지진이나 고정하중에 의한 영향보다 바람의 의한 영향이 매우 중요하다고 볼 수 있다. 또한, 풍하중은 주변 환경 및 구조물의 형태에 따라 그 크기가 매우 다르게 나타난다. 본 논문에서는, 우리나라에서 풍하중의 영향을 가장 많이 받은 지역들 중에 건설된, 2개 경기장의 설계 풍하중과 풍동실험 결과값들을 비교 검토해 보고자 한다.

• 건축역사연구
• /
• 제28권6호
• /
• pp.43-54
• /
• 2019

The grade of East Asian architecture is generally classified by the size, the shape of the roof, and the type of bracket set. The craftsmanship of columns, beam, purlin, stylobate, column base stone and paintwork is also a contributing factor for such classifications. These classifications can be found not only in historical documents such as 「Oksajo(屋舍條)」 of 『Samguksagi(三國史記)』 but also in 「house details regulations of residential architecture(家舍規制)」 of Joseon Dynasty. However, there are differences in detailed designs among the same grade of architecture regardless of the classification. In this research, the Palace, the Royal Residence(宮家), and the Jaesil(齋室) are considered as the Palatial Buildings and Royal Residences. And the advanced architectural o details which appear only in the Royal Architectures are defined as the 'The Architectural Crafts as a Code of Manners'. The Architectural Crafts as a Code of Manners is detailed design, which can be seen as fabrication of materials and supplementary factors. The Architectural Crafts as a Code of Manners used in the Palatial Buildings and Royal Residences reveal the types and their historical changes. This research will present a basis for the repair and restoration of cultural heritages to be carried out in the future, and also prevent them from further damages, thus help to preserve the cultural heritages.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.11-18
• /
• 2009

The purpose of this study is to propose a method of developing an improved Hanok. To achieve this, an investigation was carried out on the factors of the main floor plan in the improved Hanok development and an interview was conducted with residents who live in the improved Hanok development. The conclusions obtained through this study are as follows: First, The shape of 一 was marked at the highest in the Korean traditional plan types such as 一, ㄱ and 田. It is considered that this reduces the cost of construction by simplifying the structure of the roof. Second, the size was consisted of $5{\times}3$ Kan, the Korean traditional module that determines the number of columns and expresses the position of the inner wall. However, the Kan measure ments for the bathroom and multi-purpose room differed. Third, 57.6% of the 2 bedroom units were investigated. However, 60% of the residents preferred 3 bedroom units. Fourth, the results of the relationship between the living room and the kitchen showed that the residents preferred L+DK type to LDK type by 54.2% and 45.8% respectively. Fifth, the residents preferred a bathroom constructed next to the bedroom because they considered that the improved Hanok development would be used as an Inn during holiday periods. Moreover, they desired a plan where the bathroom could be directly entered from the outside. Sixth, the design for the improved Hanok development should have a suitable multipurpose-room because 72.5% of the residents have extended their house to accommodate such a room. Seventh, 61% of the improved Hanok units had an entrance space, which does not exist in Korean traditional houses. For this reason, the Korean traditional floor (: the Maru) was avoided due to its inconvenience.

• 한국강구조학회 논문집
• /
• 제13권1호
• /
• pp.9-18
• /
• 2001

대스팬 철골구조물의 지붕구조로서 강관트러스가 많이 사용되고 있다. 강관트러스는 타 단면(H, L형강 등)에 비하여 구조역학적인 측면에서 유리하다고 할 수 있다. 그러나 지관의 압축력에 의하여 격점부에는 국부좌굴이 발생하고 이로 인하여 구조체 전체의 내력이 격점부의 지배를 받게 된다. 또한 강관 격점부에서의 내력 및 변형 성상은 거동이 복잡하여 정확한 거동을 예측하기 어려울뿐만 아니라 해석적으로 정밀해를 구하기 어렵다. 이 연구에서는 T형 격점부를 대상으로 지관과 주관의 직경비(d/D) 주관경과 두께비(D/T)에 관한 변수를 설정하여 일련의 실험을 진행하고 기초하여 단순한 링해석법을 이용하여 항복하중에 관한 실용해를 제안하였다. 또한 부가적으로 각국에서 제안된 항복하중에 관한 기존의 연구결과와도 비교, 검토하였다.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.172-179
• /
• 2010

The Sydney Opera House is built on a peninsula of rock that juts out into Sydney Harbor. The site was once a landing place for ships. Utzon, Architect, designed the theatres for the Opera House to fit the shape. The two theatres were placed side by side so that they both had extensive harbor views. The Sydney Opera House is designed the foyers to take full advantage of these sights. Because the building would be seen from all sides, even from above, it was to be a piece of sculpture. The outside was as important as the inside. The audience enters from behind the stage and walks around to the foyers overlooking the harbour. The wing and backstage areas are small because of the way the foyers wrap around the theatre. The stage is made up of large platform lifts which provide the vertical movement for changing scenery. The sets come up from the workshops below stage. The flytower fits under the largest roof shell and doesn't break the skyline. The important elements are the podium, the shells and the reminders. The podium, the huge monolithic concrete structure, contains hundreds of rooms and nearly all the technical equipment. The podium is clad with pink granite slabs and seen from the water. This design eliminated a maze of fire escape stairs and, at the same time, gave people a wonderful view of the harbour. The egg shell is remarkably strong and express the form as the symbol of the site.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.178-189
• /
• 1989

본 연구에서는 우선 승용차의 1/10 모형의 형상을 더욱 단순화시킨 2차원 자동차형 물체를 대상으로 하여 그 주위의 압력, 속도 및 난류량의 분포를 측정하고, 또한 울터프트(wool tuft)를 이용한 유동가시화법으로 후류구조를 파악함으로써 향후 계속될 실험적 및 수치해석적 연구의 기초를 마련하고자 한다.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.337-344
• /
• 2018

The study of the mining effect influenced by a normal fault has great significance concerning the prediction and prevention of fault rock burst. According to the occurrence condition of a normal fault, the stress evolution of the working face and fault plane, the movement characteristics of overlying strata, and the law of fault slipping when the working face advances from footwall to hanging wall are studied utilizing UDEC numerical simulation. Then the inducing-mechanism of fault rock burst is revealed. Results show that in pre-mining, the in situ stress distribution of two fault walls in the fault-affected zone is notably different. When the working face mines in the footwall, the abutment stress distributes in a "double peak" pattern. The ratio of shear stress to normal stress and the fault slipping have the obvious spatial and temporal characteristics because they vary gradually from the higher layer to the lower one orderly. The variation of roof subsidence is in S-shape which includes slow deformation, violent slipping, deformation induced by the hanging wall strata rotation, and movement stability. The simulation results are verified via several engineering cases of fault rock burst. Moreover, it can provide a reference for prevention and control of rock burst in a fault-affected zone under similar conditions.

• Wind and Structures
• /
• 제4권3호
• /
• pp.177-196
• /
• 2001

At present the most popular turbulence models used for engineering solutions to flow problems are the $k-{\varepsilon}$ and Reynolds stress models. The shortcoming of these models based on the isotropic eddy viscosity concept and Reynolds averaging in flow fields of the type found in the field of Wind Engineering are well documented. In view of these shortcomings this paper presents the implementation of a non-linear model and its evaluation for flow around a building. Tests were undertaken using the classical bluff body shape, a surface mounted cube, with orientations both normal and skewed at $45^{\circ}$ to the incident wind. Full-scale investigations have been undertaken at the Silsoe Research Institute with a 6 m surface mounted cube and a fetch of roughness height equal to 0.01 m. All tests were originally undertaken for a number of turbulence models including the standard, RNG and MMK $k-{\varepsilon}$ models and the differential stress model. The sensitivity of the CFD results to a number of solver parameters was tested. The accuracy of the turbulence model used was deduced by comparison to the full-scale predicted roof and wake recirculation zone lengths. Mean values of the predicted pressure coefficients were used to further validate the turbulence models. Preliminary comparisons have also been made with available published experimental and large eddy simulation data. Initial investigations suggested that a suitable turbulence model should be able to model the anisotropy of turbulent flow such as the Reynolds stress model whilst maintaining the ease of use and computational stability of the two equations models. Therefore development work concentrated on non-linear quadratic and cubic expansions of the Boussinesq eddy viscosity assumption. Comparisons of these with models based on an isotropic assumption are presented along with comparisons with measured data.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.13-22
• /
• 2018

The purpose of this study was to consider the energy generation of the building as well as the energy demand of the building in terms of zero energy building design. The reason why the zero energy building viewpoint should be discussed is that direction of the building, heat transfer rate of the building, and the S/V ratio of the building are variables related to energy demand and solar panels installed on the building roof and building envelope are variables related to energy generation. This study proceeded as follows; Firstly, the simulation model of large office and elementary school has the same mutual volume and total floor area, and the each floor area and number of floors are adjusted so that the S/V ratio is different. To the next, the energy demand and energy generation of the simulation model were derived based on the meteorological data of Seoul, Daejeon, Busan. Finally, energy demand, energy generation, and final energy demand were compared with heat transfer rate, S/V ratio, building type, region, and orientation. The results of this study is that consideration of solar power generation in terms of energy generation should be taken into consideration at the same time in consideration of the heat transfer rate, the shape, the region and the direction of the zero energy building design.

• Geomechanics and Engineering
• /
• 제37권3호
• /
• pp.293-306
• /
• 2024

Influenced by the alternating effects of dynamic and static pressure during the mining process of close range coal seams, the surrounding rock support of cross mining roadway is difficult and the deformation mechanism is complex, which has become an important problem affecting the safe and efficient production of coal mines. The paper takes the inclined longwall mining of the 10304 working face of Zhongheng coal mine as the engineering background, analyzes the key strata fracture mechanism of the large inclined right-angle trapezoidal mining field, explores the stress distribution characteristics and transmission law of the surrounding rock of the roadway affected by the mining of the inclined coal seam, and proposes a segmented and hierarchical support method for the cross mining roadway affected by the mining of the close range coal seam group. The research results indicate that based on the derived expressions for shear and tensile fracture of key strata, the ultimate pushing distance and ultimate suspended area of a right angle trapezoidal mining area can be calculated and obtained. Within the cross mining section, along the horizontal direction of the coal wall of the working face, the peak shear stress is located near the middle of the boundary. The cracks on the floor of the cross mining roadway gradually develop in an elliptical funnel shape from the shallow to the deep. The dual coupling support system composed of active anchor rod support and passive U-shaped steel shed support proposed in this article achieves effective control of the stability of cross mining roadways, which achieves effective control of floor by coupling active support and preventive passive support to improve the strength of the surrounding rock itself. The research results are of great significance for guiding the layout, support control, and safe mining of cross mining roadways, and to some extent, can further enrich and improve the relevant theories of roof movement and control.