• 콘크리트학회논문집
• /
• 제28권2호
• /
• pp.235-244
• /
• 2016

본 논문에서는 고강도콘크리트와 SD600 철근을 적용한 특수모멘트골조의 최상층 접합부 내진성능을 파악하고자 한다. 실험체 중 K-RC-H는 내진규정에 따라 제작되었으며, K-HPFRC-H에는 횡보강근 간격을 150%로 증가시키면서 대신 강섬유를 부피비 1.0% 혼입하였다. K-RC-H, K-HPFRC-H 실험체 모두 주근이 파단하기 이전까지 내력 저하가 거의 없었고 에너지 소산능력 등에서 우수한 내진성능을 보였다. 접합부내의 U-bar는 보 주근이 휨과 함께 인장력을 받을 때 상부면으로 밀어내려는 현상을 충분히 억제하는 것으로 나타났다. 한편 SD600의 정착길이는 $1.25l_{dt}$가 확보되었는데 슬립거동이 거의 발생하지 않았다. 전반적으로 강섬유의 혼입은 휨강도 증가, 전단변형각 구속력 향상 등에 기여하였고, 강섬유 혼입률 1.0% 혼입함으로써 횡보강근 간격을 1.5배 증가시킬 수 있는 가능성을 실험적으로 확인하였다.

• Journal of Oral Medicine and Pain
• /
• 제44권2호
• /
• pp.59-64
• /
• 2019

Purpose: The aim of this study was to analyse and evaluate the morphology of the articular eminence of temporomandibular joint in young Korean adults using cone-beam computed tomography (CBCT). Methods: One hundred seventy-one subjects (59 males, 112 females) in the 20s were examined using CBCT. Width and height of articular eminence, top-roof line angle, best-fit line angle, joint space were measured. For the group comparisons, independent t-test was used with the level of significance established at $p{\leq}0.05$. Results: In asymptomatic young Korean adults, average eminence width was $9.49{\pm}1.62mm$ in males and $9.33{\pm}1.36mm$ in females. Average eminence height was $7.23{\pm}1.81mm$ in males and $6.82{\pm}1.31mm$ in females. Average eminence inclination of measured by top-roof line angle was $37.09^{\circ}{\pm}7.74^{\circ}$ in males and $36.12^{\circ}{\pm}5.65^{\circ}$ in females. Average eminence inclination measured by best-fit line angle was $50.79^{\circ}{\pm}11.49^{\circ}$ in males and $48.43^{\circ}{\pm}9.05^{\circ}$ in females. Average joint space was $3.03{\pm}0.67mm$ in males and $2.63{\pm}0.68mm$ in females. Conclusions: Increasing age did not affect the morphology of the articular eminence in asymptomatic young Korean adults. Males had slightly larger eminence width, height, top-roof line angle, best-fit line angle and joint space, but no statistical significance (p>0.05) was observed only in the joint space (p=0.001). There was no side-to-side difference in morphology (p>0.05).

• Earthquakes and Structures
• /
• 제11권5호
• /
• pp.905-924
• /
• 2016

Several two-dimensional analytical beam column joint models with varying complexities have been proposed in quantifying joint flexibility during seismic vulnerability assessment of non-ductile reinforced concrete (RC) frames. Notable models are the single component rotational spring element and the super element joint model that can effectively capture the governing inelastic mechanisms under severe ground motions. Even though both models have been extensively calibrated and verified using quasi-static test of joint sub-assemblages, a comparative study of the inelastic seismic responses under nonlinear time history analysis (NTHA) of RC frames has not been thoroughly evaluated. This study employs three hypothetical case study RC frames subjected to increasing ground motion intensities to study their inherent variations. Results indicate that the super element joint model overestimates the transient drift ratio at the first story and becomes highly un-conservative by under-predicting the drift ratios at the roof level when compared to the single-component model and the conventional rigid joint assumption. In addition, between these story levels, a decline in the drift ratios is observed as the story level increased. However, from this limited study, there is no consistent evidence to suggest that care should be taken in selecting either a single or multi component joint model for seismic risk assessment of buildings when a global demand measure such as maximum inter-storey drift is employed in the seismic assessment framework.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1391-1404
• /
• 2015

A radially retractable roof structure based on the concept of the hybrid grid shell is proposed in this paper. The single-layer steel trusses of the radially foldable bar structure are diagonally stiffened by cables, which leads to a single-layer lattice shell with triangular mesh. Then comparison between the static behavior between the retractable hybrid grid shell and the corresponding foldable bar shell with quadrangular mesh is discussed. Moreover, the effects of different structural parameters, such as the rise-to-span ratio, the bar cross section area and the pre-stress of the cables, on the structural behaviors are investigated. The results show that prestressed cables can strengthen the foldable bar shell with quadrangular mesh. Higher structural stiffness is anticipated by introducing cables into the hybrid system. When the rise-span ratio is equal to 0.2, where the joint displacement reaches the minimal value, the structure shape of the hyrbid grid shell approaches the reasonable arch axis. The increase of the section of steel bars contributes a lot to the integrity stiffness of the structure. Increasing cable sections would enhance the structure stiffness, but it contributes little to axial forces in structural members. And the level of cable prestress has slight influence on the joint displacements and member forces.

• Steel and Composite Structures
• /
• 제4권2호
• /
• pp.77-94
• /
• 2004

Steel beam-to-column joints are often subjected to a combination of bending and axial forces. The level of axial forces in the joint may be significant, typical of pitched-roof portal frames, sway frames or frames with incomplete floors. Current specifications for steel joints do not take into account the presence of axial forces (tension and/or compression) in the joints. A single empirical limitation of 10% of the beam's plastic axial capacity is the only enforced provision in Annex J of Eurocode 3. The objective of the present paper is to describe some experimental and numerical work carried out at the University of Coimbra to try to extend the philosophy of the component method to deal with the combined action bending moment and axial force.

• 한국건축시공학회지
• /
• 제11권1호
• /
• pp.51-59
• /
• 2011

최근 막 구조물의 수요 증가에 따라 막 구조물의 구조 및 재료적 연구의 진행은 막 구조물을 하나의 독립된 구조물로써 인정받을 만큼 활발히 진행되고 있지만, 유지 관리 측면의 연구의 경우 아직까지 이에 미치지 못한 상황이다. 특히 유지관리 측면에의 연구 중 지붕구조의 수밀성 및 누수에 관한 연구는 해외에서 일부만을 다루고 있어 국내 실정에 맞는 유지관리 지표 개발이 요구되고 있다. 이에 본 연구에서는 막 구조물 지붕부의 막재 및 접합부, 지붕 형태에 따른 누수취약부에 대해서의 하자 사례 조사를 통하여 누수 요인 및 열화 인자를 분석하였고, 이를 AHP기법을 활용하여 중요도를 부여하여, 막 구조물에서 필요한 유지관리 지표를 제안하였으며, 이를 바탕으로 막 구조물 지붕의 장기적으로 수밀성 확보를 위한 설계 및 시공단계서의 수밀성 평가 지표, 준공 후 사용과정에서의 점검 관리 지표를 제안하였다.