• 한국지형학회지
• /
• 제23권1호
• /
• pp.1-16
• /
• 2016

This study estimates relationships between physical and chemical weathering indices of various rock types and topographical relief. Physical weathering properties such as rock strength and joint and chemical weathering indices such as the $SiO_2/Al2O_3$, CIA and WPI were analyzed from 18 rock outcrops in mountain and valley areas consisting of 9 rock types. The results indicate that the elevation and relief of topography increase physical strength of rock increases. It can be suggested that the total r(rock-mass strength rating) and R(rock rebound strength by Schmidt Hammer) are most useful indices as a quantitative weathering property factor to explain formative causes of topographical relief. The results also suggest that rock types such as sandstone, granite, gneiss and schist are most suitable to explain meaningful difference in topographical relief with the physical and chemical weathering indices.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.115-122
• /
• 1996

• 자원환경지질
• /
• 제52권6호
• /
• pp.617-626
• /
• 2019

이 연구에서는 해남 대흥사 북미륵암 마애여래좌상을 구성하는 석재의 암석학적 특성과 물성을 진단하였다. 이 마애불상은 미문상화강암에 부조되어 있으며, 전체적인 암상은 장석에 포위된 작은 석영 결정들이 미문상 조직을 이루고 있다. 손상도 진단 및 평가 결과, 흑색변색(8.4%)과 균열지수(6.6)에서 높은 훼손율을 보였고, 초음파 속도는 약간 풍화단계의 풍화도지수(평균 0.18)가 산출되었다. 마애불의 표면에 나타나는 손상은 기존 보호각의 영향으로 판단되고, 물성은 자연암반의 구조적 특성과 균열의 직접적인 영향에 의한 것으로 해석된다.

• 한국지형학회지
• /
• 제23권3호
• /
• pp.27-39
• /
• 2016

This study statistically investigates relationships between physical properties of rocks and topography by measuring and analyzing section, topographical and measured parameters of 58 bedrock outcrops at areas covered by gneiss, schist, granite, andesite, sandstone and limestone in the Korean Peninsula. Multiple linear regression analysis suggests that the joint spacing, joint continuity, weathering grade and maximum joint width of rocks among the measured parameters are related to the topographical parameters with statistical significances. Therefore, this study suggests that rock properties such as joint spacing, joint continuity, weathering grade and maximum joint width seem to greatly influence topography, although various factors can affect topographical parameters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.81-88
• /
• 2001

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity is widely used in determination of rock quality in road and railway tunnel design. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test in laboratory, such as uniaxial compressive strength(UCS), p wave velocity, Young's modulus and electrical resistivity. We correlate each test results and we found out that electrical resistivity has exponentially related to UCS and P wave velocity and linearly related to Young's modulus. And we accomplished electrical resistivity survey in field site and carried out electrical resistivity logging at in-situ area. Also we peformed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to rock classification results. We found out that electrical resistivity logging data are highly correlate to RQD, Q and RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RQD, Q and RMR.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 암반역학위원회 학술세미나 논문집
• /
• pp.119-137
• /
• 2003

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity Is widely used In determination of rock quality in road and railway tunnel design. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test In laboratory, such as uniaxial compressive strength(UCS), P wave velocity, Young's modulus and electrical resistivity. We correlate each test results and we found out that electrical resistivity has exponentially related to UCS and P wave velocity and linearly related to Young's modulus. And we accomplished electrical resistivity survey in field site and carried out electrical resistivity togging at In-situ area. Also we performed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to rock classification results. We found out that electrical resistivity logging data are highly correlate to RQD, Q and RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RQD, Q and RMR.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.23-28
• /
• 2006

In this study, the general theory of fractality is discussed to provide a fundamental understanding of fractal geometry applied to heterogeneous material surfaces like pavement surface and rock surface. It is well known that many physical phenomena and systems are chaotic, random and that the features of roughness are found at a wide spectrum of length scales from the length of the sample to the atomic scales. Studying the mechanics of these physical phenomena, it is absolutely necessary to characterize such multi scaled rough surfaces and to know the structural property of such surfaces at all length scales relevant to the phenomenon. This study emphasizes the role of fractal geometry to characterize the roughness of various surfaces. Pavement roughness and rock surface roughness were examined to correlate their roughness property to fractality.

• 지질공학
• /
• 제26권4호
• /
• pp.593-600
• /
• 2016

본 연구에서는 국내의 107개 터널 설계 과정에서 수행한 현장 및 실내시험 자료 4,280개를 이용하여 암반 및 무결암의 역학적 특성을 암종 및 강도별로 분석하였다. 분석된 물리 및 역학적 특성은 단위중량, 점착력, 내부마찰각, 변형계수, 탄성계수, 포아송비, 일축압축강도, 인장강도, 투수계수, 비중이다. 평균값의 분석 결과에 의하면 편마암은 비중, 화강암은 투수계수, 퇴적암은 단위중량과 점착력, 내부마찰각, 화산암은 변형계수와 탄성계수, 일축압축강도, 인장강도, 변성암은 포아송비에서 가장 높은 값을 보인다. 역학적 특성의 분포 범위는 암종 및 강도를 고려한 분석에도 불구하고 넓게 분포하며, 이는 암반의 불균질성과 이방성에 기인하는 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.883-898
• /
• 2017

To eliminate the holding and gluing problems making the direct tensile strength test hard to be applied, a new method of testing specimens prepared using lathe machine to make the dog bone shape is assessed whether it could be applied to determine accurate direct tensile strength values of rock materials. A series of numerical modelling analyses was performed using finite element method to investigate the effect of different specimen and steel holder geometries. In addition to numerical modelling study, a series of direct tensile strength tests was performed on three different groups of rock materials and a rock-like cemented material to compare the results with those obtained from the finite element analyses. A proper physical property of the lathed specimens was suggested and ideal failure of the dog bone shaped specimens was determined according to the results obtained from this study.

• 지구물리와물리탐사
• /
• 제7권3호
• /
• pp.174-183
• /
• 2004

퇴적암반에서의 암석 강도는 시추공 굴착 과정에서 동반될 수 있는 시추공 불안정이나 효율적인 모래 생산 평가, 또는 시추공 압축 파쇄대를 이용한 지반 응력장 추정 문제 등 다양한 범위의 지질 역학적 문제들에 있어서 선결적으로 규명되어야 할 요소 중 하나이다. 본 연구에서는 여러 종류의 퇴적암(사암, 셰일, 석회암, 방해석 등)에서의 일축 압축 강도와 기타 물성(속도, 탄성계수, 공극률)을 관계 짓는 경험식들을 수집하여 검토하였다. 이들 경험식들은 시추공 물리검층을 통해 측정 가능한 파라미터들로 암석 강도를 추정하는데 이용될 수 있다. 일부 관계식들(예를 들어 사암이나 셰일의 강도-공극률 관계식)은 일정정도 만족스러운 강도 추정 도구로 이용될 수도 있지만, 각각의 물성 측정치에 대한 암석 강도가 상당히 분산되어 있어 모든 자료를 만족스럽게 예측하기에는 충분히 일반화 시킬 수 없다는 문제점이 있다. 따라서 이들 경험식들을 이용하기 전에 해당 지역에 대한 강도-물성 관계 캘리브레이션의 중요성이 강조된다. 그럼에도 불구하고 현장 암석 강도의 최저 한계 정보를 제공할 수 있는 몇몇 경험식들은 시추공 불안정 분석과 관련하여 유용하게 이용될 수 있다.