• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.109-126
• /
• 2015

Because fault gouge developed at the center of fault is recognized as one of the most important weak sites, it is evident that clay mineralogy and physical properties greatly affect the rock stability. The purpose of this study is to establish the relationship of mineralogy and physical factors that control rock stability in fault zones. We analyzed a total of 51 samples from 16 main faults which were selected from a Korea fracture map, using XRD, SEM, and physical analyses like unit weight, friction and cohesion properties. Though it is considered that the most common clay minerals comprising fault gouge are kaolinite, illite and smectite, clay mineralogy slightly varies depending on lithology: illite > smectite > kaolinite and chlorite in volcanic rocks, kaolinite and chlorite > illite > smectite in sedimentary rocks, and illite > smectite > kaolinite and chlorite in abundance, respectively. Friction angle decreases with increasing clay content. Cohesion increases with increasing clay content below the 45 % region while it decreases with increasing clay content at the region higher than 45%, with some scatters in the data. It is likely that these results are ascribed to the physical heterogeneity of fault gouges with varying content of different clay minerals.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.293-311
• /
• 2021

The volcanic rocks that make up Yeongdo island, an administrative district located on the southern coast of Busan, are composed of andesitic and rhyolitic rocks. Andesitic rock is mainly composed of volcanic breccia has a phenorysts of plagioclase and contains rock fragments. The rhyolitic rock is composed of volcanic angular rock at the base of Mt. Bongnae, and welded tuff forms the main mass of Mt. Bongnae. The fiamme structure can be easily observed with the naked eye, and the higher the altitude, the weaker the welded structure develops and the less the amount of rock fragments and crystals constituting the welded tuff. It is indicated that the magma that formed this study area is related to the tectonic environment of the continental margin related to subduction, and that it erupted after undergoing fractional cystallization at the same time with some contaminant in the continental crust. As a result of analyzing the main elements by altitude, it is believed to be the result of mixing at least 4 times or more of magma batches.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.299-311
• /
• 2022

Rocks exposed to the surface are subject to long-term weathering, and such effects weaken their engineering stability. Especially as weathering progresses, the surface of rocks will be changed by weathering, and such surface changes will affect the engineering safety of the rock mass. In addition, the chemical species produced in the weathered rock have a direct effect on the surrounding environment or on the structure. In areas where rocks are exposed, such as mining areas, chemical species produced by weathering can have a serious impact on the surrounding natural environment. In this study, accelerated weathering experiments using freeze/thaw system were conducted on rocks that had already been weathered and fresh rocks, and surface changes of each rock were observed with confocal laser scanning microscope (CLSM), and chemical species were analyzed using IC/ICP-MS. As the weathering progressed, the surface roughness decreased, and the amount of chemical species produced increased. The results of this study can be used as basic data for evaluating engineering/environmental safety in areas where rocks are exposed.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.29-40
• /
• 1993

Several vermiculite deposits occur as the alteration product from phlogopite in ultramafic rock, in the Hongseong and Cheongyang area, South Korea. Some quarries show well-defined weathering profile. Samples collected from those quarries were examined by XRD and chemistry to define a vertical variations in mineralogy and chemistry of the weathering profile developed on ultramafic rocks. The analysis by X-ray diffractometry showed that mineral compositions changed continuously as depth of profile increasing, the vermiculite-the phlogopite/vermiculite interstratified-the phlogopite. Chemical analysis of bulk samples in altered zone revealed that regardless of composition and kinds of mineral in the rock, there are significant increase of MgO, CaO and $H_2O$, and decrease of K as depth of profile decrease reflecting the characteristics in vermiculitization. Also, there was a tendency that weathering indicies of each sample horizon change gradually with increasing depth. This tendency can be explained as variations of degree of vermiculitization. The regular changes of mineralogical and chemical composition in vertical profile suggest that weathering is the most important process in vermiculitization in this area.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.85-98
• /
• 2008

Calc-silicate rock sheet occurs within the Precambrian metasedimentary rocks in Bonghwa area, Kyungsangbuk-do, Korea. The calc-silicate rock runs parallel to bedding plane with $14{\sim}18$ meters in width. Calcite, dolomite, serpentine and tremolite are occurred as major minerals and talc is occurred as a miner mineral. Serpentine mainly occurs in the upper part and tremolite occurs in lower part of calc-silicate rock sheet. Colors of calc-silicate rock change to deeper green with increasing amounts of serpentine mineral. XRD, FT-IR analyses indicates that serpentine mineral is antigorite. Platy structure of antigorite is well observed by SEM analysis. EPMA data indicates that chemical composition of antigorite is very close to ideal ($SiO_2$: 44.3 wt% and MgO: 40.8 wt%). The chemical formula of antigorite is calculated as $Mg_{2.82}Al_{0.04}Fe^{3+}_{0.04}Si_{2.05}O_5(OH)_4$. From careful study by comparing mineralogical analysis data and occurrence, calc-silicate rock sheet was formed by metamorphism of calcareous sedimentary rocks having different mineralogical and chemical compositions. It is considered that the host rock of serpentine enriched upper part was more Mg-rich rocks than the host rocks of tremolite enriched lower part.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.1
• /
• pp.26-34
• /
• 1996

The white leather-like playgorskite occurs as a vein in the Cretaceous sedimentary rocks in the Yeongsan area, Kyeongnam, Korea. It has been investigate by means of XRD, TEM, DTA-TG, IR and chemical analysis. The palygorskite vein is composed mostly of well-crystallized palygorskite. The wall rock of the vein is altered to smectite along both sides of the vein. According to TEM observation the palygorskite shows a fibrous habit. The sizes offibers are quite variable, ranging from 0.1 to 3.0 micron in length. From XRD data, the palygorskite has orthorhombic unit cell with a=12.726$\AA$, b=17.796$\AA$, c=5.1666$\AA$. The chemical formula of the palygorskite was calculated as [Si7.93Al0.07](Al1.91Fe+30.11Mg1.96)Ca0.01O20(OH)4(OH2)2.

• Economic and Environmental Geology
• /
• v.18 no.1
• /
• pp.11-22
• /
• 1985

The Daehwa and Donsan tungsten-molybdenum deposits are composed of numerous fissure-filling veins developed in Precambrian gneiss and Cretaceous granite and quartz porphyry. K-Ar age of biotite in granite and that of muscovite in ore veins are $105{\pm}5\;Ma$ and 88.2~88.6 Ma respectively. Occurrence of ore deposits shows that relevant igneous rock is possibly quartz porphyry rather than above mentioned granite in temporal view point. Vein structure and mineralogy suggest that ore veins were formed by continuous vein filling, not by repeated mineralization. Three distinct depositional stages with decreasing age can be devided on the basis of mineral paragenesis and fluid inclusion studies: Stage I, deposition of oxides and silicates; stage II, deposition of base-metal sulfides and sulfosalts with carbonates; stage III, deposition of barren calcite and fluorite. Tungsten, molybdenum and tin mineralization occurred in stage I.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.1-10
• /
• 1993

The Andong serpentinite body is distributed along the Andong fault, and shows an elliptical shape. The serpentinite is composed of serpentine minerals and other various minerals such as forsterite, pyroxene, talc, tremolite, chlorite, prehnite, calcite and dolomite. The serpentine minerals consist primarily of lizardite with minor chrysotile. Antigorite rarely occurs in some veins. The serpentinite is largely divided into two alteration zones by the occurrence and mineral assemblages. One of the alteration zones is composed of a large amount of serpentine minerals. The other is characterized by tremolite and chlorite. The alteration zone composed of tremolite and chlorite seems to have been formed by hydrothermal alteration after the formation of serpentinite. It is considered that the serpentinite have been formed by alteration of the ultramafic rock such as peridotite.

• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.215-227
• /
• 1980

The rock units of Goesan area in the Ogcheon metamor phic terrain established on the basis of field criteria should be redefined into following sequence. Based on shear senses in secondary small structures which are usually observable in the investigated area, the stratigraphy can be lithologically divided into the lower pelite, pebbly mudstone, upper pelite, quartzite and psammite unit in ascending order. This conclusion is in discordance with a previous opinion; Munjuri formation and Guryongsan formation may be equivalent to upper pelite unit, Iwonri formation and Hwanggangri formation to pebbly mudstone. From this, it may be inferred that isoclinal overturned folds repeatly occur in the area. The uranium bearing coaly thin layers in upper pelite unit have relatively broad exposures in Deogpyeongri block of Goesan area along culmination zone in the central part of the investigated area. It is believed that structural feature in the block recognized complexly refolded synform plunging to southwest. Mineralogical and radiometric studies were made on 135 representative samples from the Ogcheon Group of Korea. The mineralogy of all black slate samples is qualitatively similar but quantitatively ·different. The uranium distribution in the studied area show approximately log normal. Uranium in the black slates of the Ogcheon Group was deposited together under same physico-chemical environmental conditions. The chemical and geological factors that controlled the abundance of organic carbon and iron oxides also controlled the uranium content. The relationship of the major components to uranium can be expressed by the following regression equation: $Log(U\times10^4+1)$= 1.70999-0.00367(quartz)0.00512(micas)-0.00930 (other silicates)+0.01911 (iron oxides)-0.03389(other opaques)+0.02062(organic carbon).

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.51-64
• /
• 2022

For effective preservation of the rocks, which bearing plant fossils at Gumkwangdong Formation, Pohang, the properties of rock and treatment of chemicals were examined in an artificial weathering test. The rocks are diatomaceous siliceous mudstone, which contain a small amount of smectite and has developed laminated layers. The rocks react with water, the d₀₀₁ spacing of smectite was increased. On the one hand, the physical properties of the rock samples, such as surface hardness, improved after the application of ethyl silicate-based stone strengthener. On the other hand, the spacing of interlayer of swelling clay minerals decreased and spacing of laminae layer increased. When the ethyl silicate-based stone strengthener was applied after pretreatment with a swelling inhibitor, interlayer and spacing of laminae changes were similar to those when only the stone strengthener was treated. The effect of the swelling inhibitor was almost negligible. When the rocks that have been conserved with chemicals react with water, spacing of laminae has widened much, whereas when the rocks was in contact with moisture only, there was little change. In addition, if it is placed in the outdoor after conservation treatment, although it occurs slightly slower than the untreated rock, the separation of the lamination layer and the pulverization of the rock occur within a very short time. Consolidation is required to improve the physical properties of fossil rock, but when exposed to rain and undergoing freeze-thaw process, the effect is lost very quickly. Therefore, regardless of the chemical treatment, it is a priority to prevent direct rainfall contact with the rock.