• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.211-219
• /
• 2023

This study analyzes the changes in the physical properties of grout by irradiating it with ultrasonic energy and assesses the injectability of the grout into deep rock fractures. The materials used in the research are OPC (Ordinary Portland Cement) and MC (Micro Cement), and are irradiated depending on the water/cement ratio. After irradiating the grout with ultrasonic energy, viscosity, compressive strength, and particle size are analyzed, and the results of the particle size analysis were applied to Nick Barton's theory to evaluate the injectability of the grout into deep rock fractures under those conditions. It was found that the viscosity of the grout decreased after ultrasonic wave irradiation, and the rate of viscosity reduction tended to decrease as the water/cement ratio increased. Additionally, an increase in compressive strength and a decrease in particle size were observed, indicating that the grout irradiated with ultrasonic energy was more effective for injection into rock fractures.

• 터널과지하공간
• /
• 제25권4호
• /
• pp.359-372
• /
• 2015

암반에는 단층, 절리, 층리 등의 불연속면이 많이 포함되어 있다. 이러한 불연속면은 기하학적 복합성에 의해 복잡한 구조로 나타난다. 이 연구는 스텝으로 배열된 두 전단균열의 끝에서 나타나는 구조 발달을 수치해석적으로 연구하였다. 이 연구에서는 PFC2D(Particle Flow Code) 프로그램을 이용하여 두 전단균열의 끝에서 형성되는 초기균열(incipient fracture)뿐만 아니라 초기균열에서 덧자라는 균열의 성장과정을 살펴보았으며, 균열 발생 시 나타나는 주변응력상태를 관찰하였다. 모든 실험 결과에서는 균열 끝에서 발생한 초기 균열 대부분이 인장균열에 의한 것으로 나타났으며, 균열의 전파각은 초기에 $30{\sim}57^{\circ}$에서 실험이 더 진행되면 저각으로 발달하는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.946-956
• /
• 2008

Acoustic emission(AE) is low-energy seismic event associated with a sudden inelastic deformation such as the sudden movement of existing fractures, the generation of new fractures or the propagation of fractures. These events rapidly increase before major failure and happen within a given rock volume and radiate detectable seismic waves. Rock slopes are usually large in scale and there are many discontinuities in rock mass. AE waves are strongly attenuated when they propagate through joints. Thus we should resolve the attenuation problem to monitor large volume. In this study, we developed waveguide which is composed of two different materials, cement mortar and stainless steel rod. And several laboratory tests on developed waveguide are performed to obtain generalized AE parameters to predict the failure stage in rock slope. Comparing field data with experimental data in laboratory tests, failure stage of rock slope can be evaluated. To verify and optimize the developed monitoring method, we are now carrying out the field application at a rock slope.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.323-331
• /
• 2019

The presence of defects in nature changes the physical parameters of the rock. In this paper, by studying the rock-like specimens with conjugated fractures, the horizontal angle and length are changed, and the physical parameters and failure modes of the specimens under uniaxial compression test are analyzed and compared with the results of simulation analysis. The experimental results show that the peak strength and failure mode of the rock-like specimens are closely related to the horizontal angle. When the horizontal angle is $45^{\circ}$, the maximum value is reached and the tensile failure mode is obtained. The fracture length affects the germination and propagation path of the cracks. It is of great significance to study the failure modes and mechanical properties of conjugated fracture rock-like specimens to guide the support of fractured rock on site.

• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.93-105
• /
• 2022

With the exploitation of natural resources in China, underground resource extraction and underground space development, as well as other engineering activities are increasing, resulting in the creation of many defective rocks. In this paper, uniaxial compression tests were performed on rocks with double holes and fractures at different angles using particle flow code (PFC2D) numerical simulations and laboratory experiments. The failure behavior and mechanical properties of rock samples with holes and fractures at different angles were analyzed. The failure modes of rock with defects at different angles were identified. The fracture propagation and stress evolution characteristics of rock with fractures at different angles were determined. The results reveal that compared to intact rocks, the peak stress, elastic modulus, peak strain, initiation stress, and damage stress of fractured rocks with different fracture angles around holes are lower. As the fracture angle increases, the gap in mechanical properties between the defective rock and the intact rock gradually decreased. In the force chain diagram, the compressive stress concentration range of the combined defect of cracks and holes starts to decrease, and the model is gradually destroyed as the tensile stress range gradually increases. When the peak stress is reached, the acoustic emission energy is highest and the rock undergoes brittle damage. Through a comparative study using laboratory tests, the results of laboratory real rocks and numerical simulation experiments were verified and the macroscopic failure characteristics of the real and simulated rocks were determined to be similar. This study can help us correctly understand the mechanical properties of rocks with defects and provide theoretical guidance for practical rock engineering.

• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.399-409
• /
• 2016

The fracture propagation mechanism and fractured rock mass failure mechanism were important research in geotechnical engineering field. Many failures and instability in geotechnical engineering were related on fractures propagation, coalescence and interaction in rock mass under the external force. Most of the current research were limited to two-dimensional for the brittleness and transparency of three-dimensional fracture materials couldn't meet the requirements of the experiment. New materials with good transparent and brittleness were developed by authors. The making method of multi fracture specimens were established and made molds that could be reused. The tension-compression ratio of the material reached above 1/6 in normal temperature. Uniaxial and biaxial loading tests of single and double fracture specimens were carried out. Four new fractures were not found in the experiment of two-dimensional fractures such as the fin shaped crack, wrapping wing crack and petal crack and anti-wing crack. The relationship between stress and strain of the specimens were studied. The specimens with the load had experienced four stages of deformation and the process of the fracture propagation was clearly seen in each stage. The expansion characteristics of the fractured specimens were more obvious than the previous research.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1882-1889
• /
• 2007

Surveying rocks for engineering aims for prediction of geological feature of the construction site. Conventionally, survey information at outcrops and bore holes are projected to the construction sites, such as tunnel and slopes, and rock properties of the sites are predicted by interpretations of specialists. This system, the "Fracjection", aims to assist the specialist for visualization of the projected fractures from borehole and outcrop survey. The Fracjection accepts the BIPS and outcrop survey data to its database and allows plotting them in AutoCad map. The software also reads elevation data from contours of the topographic map and constructs DEM of the construction sites. With user's guide, it generates 3D excavation sites such as slopes and tunnels at the topographic map. The s/w projects borehole and outcrop surveyed fractures onto the modeled excavation surface and allows analysis of failure criteria, such as plane, wedge, and toppling failures by built-in stereonet function. Projected fractures can further be analyzed for structural homogeneities and rock mass quality. Moving window style correlation comparison of stereonet plots are used for formal analyses, and RQD type counts of the projected fractures are adopted for the latter analyses.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.312-320
• /
• 2002

암반 내 존재하는 절리는 전단응력에 의해 미끄러지는 전단변형 거동을 하며, 역학적 경계조건 및 절리면의 거칠기에 영향을 받는다. 이러한 경우, 절리의 전단변형과 거칠기에 의해 발생된 팽창으로 인해 간극분포가 변화한다. 또한, 절리는 유체 흐름의 경로가 되며, 간극분포 특성에 영향을 받는 것으로 알려져 있다. 따라서 본 연구에서는 절리의 전단변형 거동에 미치는 거 칠기의 영향 및 간극분포의 변화를 정량적으로 분석하여 절리의 수리학적 거동을 해석하고자 시도하였다. 이러한 절리의 수리-역학적 거동에 대한 이해를 향상시키기 위하여 절리면의 거칠기 변화가 절리의 전단변형 및 수리 지동에 미치는 영향을 분석하고자 하였다. 이를 위하여, 통계적 방법을 이용하여 절리를 발생하고, 이를 전단변형 거동과 수리학적 모델에 적용한 수치해석을 실시하였다 본 연구의 주요 결과로는, 절리의 거칠기가 감소하고 수직응력이 증가할수록 전단응력이 연성 거동으로 변하는 것으로 나타났다. 또한, 전단변형 후 절리의 간극분포는 절리면의 거칠기에 큰 영향을 받아 절리의 투수성 변화에 거칠기가 중요한 역할을 하는 것으로 나타났다. 마지막으로, 절리면의 거칠기가 증가할수록 전단변형에 의한 채널 현상의 붕괴가 조기에 발생하는 것으로 나타났다.

• 지질공학
• /
• 제7권1호
• /
• pp.53-62
• /
• 1997

암석의 파고역학적 특성은 암반 내의 자연균열들의 분포를 예측하거나 혹은 불연속면을 포함하는 암사면이나 지하구조물의 안정성을 해석하기 위한 중요한 자료로 활용될 수 있다. 본 연구에서는 암석의 파괴역학적의 특성의 차이를 측정하여 암종에 따른 제한적인 분포를 나타내는 자연균열에 대한 연구를 수행하였다. 자연균열과 인공균열의 진행특성을 정성적 및 정량적인 기준에 의하여 분석한 결과, 기원이 다른 균열들은 성장특성에 있어서 뚜렷한 차이를 나타냄을 확인할 수 있다. 따라서, 암석 파괴역학적의 이론을 이용하여 암반 내에 분포하는 균열들의 기원이나 공학적 특성을 예측하기 위해서는 먼저 충분한 지질학적인 이론과 근거가 요구됨을 알 수 있다.

• 터널과지하공간
• /
• 제16권6호
• /
• pp.476-485
• /
• 2006

발파에 의한 암반의 손상이나 파쇄는 폭약의 폭굉 과정에서 발생하는 충격파와 가스팽창의 영향에 의해 야기된다. 발파에 의한 파괴 메커니즘을 완전히 이해하기 위해서는 두 메커니즘을 같이 연구해야한다. 본 연구에서는 개별 요소법에 기초한 수치해석 프로그램인 PFC2D를 이용하여 발파공 벽면에 작용하는 폭굉압과 가스압을 동시에 모델링 할 수 있고 이에 따른 암반 내 균열 발생을 확인할 수 있는 알고리즘을 개발하였다. 또한 시멘트-모르타르 블록에서의 모형 발파시험을 수치해석을 수행함으로써, 개발된 알고리즘을 검증하였다.