• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2992-2994
• /
• 1999

This paper investigates the direct adaptive control of nonlinear systems using RBFN(radial basis function networks). The structure of the controller consists of a fixed PD controller and a RBFN controller in parallel. An adaptation law for the weight adjustment is developed based on the Lyapunov stability theory to guarantee the stability of the overall control scheme. Also, the tracking errors between the system outputs and the desired outputs converge to zero asymptotically. To evaluate the performance of the controller, the proposed method is applied to the trajectory control of the two-link manipulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1269-1271
• /
• 1996

This paper presents a visual servoing combined by evolutionary algorithms and neural network for a robotic manipulators to control position and orientation of the end-effector. Using the multi layer feedforward neural network that permits the connection of other layers, evolutionary programming(EP) that search the structure and weight of the neural network, and evolution strategies(ES) which training the weight of neuron, we optimized the net structure of control scheme. Using the four feature image information from CCD camera attached to end-effector of RV-M2 robot manipulator having 5 dof, we generate the control input to agree the target image, to realize the visual servoing. The validity and effectiveness of the proposed control scheme will be verified by computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.340-345
• /
• 1998

A virtual reality system is implemented for the operator supervising a robot's operation at a remote site. For this implementation, a two D.O.F force-reflective joystick is designed to reflect the force/torque measured at the end of robotic manipulator and to generate the motion command for the robot by the operator using this joystick. In addition, the visual information that is captured by a CCD camera, is transmitted to the remote operator and is displayed on a CRT monitor. The operator who is holding the force reflective joystick and watching the CRT monitor can resolve unexpected problems that the robot confronts with. That is, the robot performs the tasks autonomously unless it confronts with unexpected events that can be resolved by only the operator. To demonstrate the feasibility of this system, a remote peg-in-hole operation is implemented and the experimental data are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1435-1439
• /
• 2004

Most recently, CP(Cellular Phone) has been one of the most important technologies in the IT(Information Tech-nology) field, and it is situated in a position of great importance industrially and economically. To produce the best CP in the world, a new technological concept and its advanced implementation technique is required, due to the extreme level of competition in the world market. The RT(Robot Technology) has been developed as the next generation of a future technology. Current robots require advanced technology, such as soft computing, human-friendly interface, interaction technique, speech recognition, object recognition etc. unlike the industrial robots of the past. Therefore, this paper explains conceptual research for development of the RCP(Robotic Cellular Phone), a new technological concept, in which a synergy effect is generated by the merging of IT & RT. RCP infra consists of $RCP^{Mobility}$ $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP mobility system is focused in this paper. $RCP^{Mobility}$ is to apply a mobility technology, which is popular robot technology, to CP and combine human-friendly motion and navigation function to CP. It develops a new technological application system of auto-charging and real-world entertainment function etc. This technology can make a CP companion pet robot. It is an automation of human-friendly motions such as opening and closing of CPs, rotation of antenna, manipulation and wheel-walking. It's target is the implementation of wheel and manipulator functions that can give service to humans with human-friendly motion. So, this paper presents the definition, the basic theory and experiment results of the RCP mobility system. We confirm a good performance of the RCP mobility system through the experiment results.

• Composites Research
• /
• 제31권5호
• /
• pp.227-237
• /
• 2018

본 논문에서는 밀폐/협소의 공간에 적용을 위한 이동형 용접 로봇의 매니퓰레이터의 경량화 및 단열 성능 확보를 위한 설계 적용 연구 내용을 나타내었다. 선박 및 해양플랜트와 같이 구조가 복합하고 협소한 공간에 대한 용접 작업을 위하여 용접사를 작업 대상물 외부에서 용접로봇을 이용한 용접작업을 위하여 다양한 로봇 플랫폼이 개발되고 있다. 일반적인 로봇의 개발 과정은 적용 환경과 요구조건을 고려하여 기계 개발, 전자 장치 개발, 제어 알고리즘 개발 및 통합 검증으로 이루어 진다. 용접로봇의 완성도 높은 개발을 위하여 로봇 플랫폼의 기본 설계에서 환경 조건을 고려한 로봇 매니퓰레이터의 경량 설계를 수행하였다. 또한, 단열성능 및 냉각 성능 확보를 위한 소재 선정과 검증, 해석 및 시험의 과정을 거처 개발된 로봇과 연구 결과를 나타내었다.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.347-352
• /
• 2011

일반 산업용 로봇의 위치정밀도는 $100{\mu}m$ 정도임에 반해, 정밀부품의 조립공차는 수십 ${\mu}m$ 이내이다. 또한, 조립공차가 작을 경우 미소한 위치/각도 오차에 의해 재밍 또는 웨징이 쉽게 발생하며, 위치제어 기반의 로봇인 경우 부품 조립 시 접촉력을 적절히 조절하지 못하여 조립물이 파손될 가능성이 크다 이와 같은 문제를 해결하기 위하여 접촉력에 능동적으로 반응할 수 있는 힘제어 기반의 로봇조립에 대한 연구가 진행되고 있다. 본 연구에서는 기존의 산업용 로봇에 적용하기 용이하도록 위치제어 기반의 머니퓰레이터에 힘제어를 적용할 수 있는 시스템을 구현하였다. 머니퓰레이터에 어드미턴스 필터를 이용한 임피던스 제어를 적용하여 안정적인 접촉운동을 구현하였다. 또한, 임피던스 제어와 blind 검색을 적용하여 정밀부품을 조립할 수 있음을 검증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권8호
• /
• pp.2529-2551
• /
• 2022

Visual servoing (VS) based on the Kalman filter (KF) algorithm, as in the case of KF-based image-based visual servoing (IBVS) systems, suffers from three problems in uncalibrated environments: the perturbation noises of the robot system, error of noise statistics, and slow convergence. To solve these three problems, we use an IBVS based on KF, African vultures optimization algorithm enhanced extreme learning machine (AVOA-ELM), and fuzzy logic (FL) in this paper. Firstly, KF online estimation of the Jacobian matrix. We propose an AVOA-ELM error compensation model to compensate for the sub-optimal estimation of the KF to solve the problems of disturbance noises and noise statistics error. Next, an FL controller is designed for gain adaptation. This approach addresses the problem of the slow convergence of the IBVS system with the KF. Then, we propose a visual servoing scheme combining FL and KF-AVOA-ELM (FL-KF-AVOA-ELM). Finally, we verify the algorithm on the 6-DOF robotic manipulator PUMA 560. Compared with the existing methods, our algorithm can solve the three problems mentioned above without camera parameters, robot kinematics model, and target depth information. We also compared the proposed method with other KF-based IBVS methods under different disturbance noise environments. And the proposed method achieves the best results under the three evaluation metrics.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.788-794
• /
• 2002

To improve surgical result of total hip arthroplasty (THA), there has been some approaches using a robotic milling system, which can make a precise cavity in the femur. Usually, to carve a femur, the surgical robot is controlled by a pre-programmed tool-path regardless of a surgeon's experience and Judgment. This paper presents a control method of a surgical robot for THA, which can be used as an advanced surgical tool. With a master/slave combined surgical robot, surgeon can directly control the motion and velocity of a surgical robot. The master/slave-combined robot is controlled to display a specific admittance for a surgeon's force to the surgical robot velocity. To prevent the over-carving of a femur, virtual hard wall is displayed on the surgical boundary. To evaluate the proposed control method of the master/slave-combined surgical robot, 2-DOF master/slave-combined manipulator is used in experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1116-1120
• /
• 2004

In the nuclear power plant, there are several cylindrical vessels such as reactor vessel, pressuriser and so on. The vessels are usually constructed by welding large rolled plates, forged sections or nozzle pipes together. In order to assure the integrity of the vessel, these welds should be periodically inspected using sensors such as ultrasonic transducer or visual cameras. This inspection is usually conducted under water to minimize exposure to the radioactively contaminated vessel walls. The inspections have been performed by using a conventional inspection machine with a big structural sturdy column, however, it is so huge and heavy that maintenance and handling of the machine are extremely difficult. It requires much effort to transport the system to the site and also requires continuous use of the utility's polar crane to move the manipulator into the building and then onto the vessel. Setup beside the vessel requires a large volume of work preparation area and several shifts to complete. In order to resolve these problems, we have developed an underwater mobile robot guided by the laser pointer, and performed a series of experiments both in the mockup and in the real reactor vessel. This paper introduces our robotic inspection system and the laser guidance of the mobile robot as well as the results of the functional test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1587-1592
• /
• 2003

There are three kinds of singularity in controlling redundant manipulators. Kinematic, algorithmic and representation singularities are those. If manipulators fall into any singularity without proper action to avoid it, the control system must go away from our desire, and we can meet a dangerous situation. Hence, we have to deal the singularities very carefully. In this paper, we describe an on-line solution for avoiding the occurrence of both algorithmic and kinematic singularities in task-priority based kinematic controllers of robotic manipulators. Representation singularity can be easily avoided by using proper representation algorithm, so, in this paper, we only consider kinematic and algorithmic singularities. The proposed approach uses a desired task reconstruction and a successive task projection in order to maintain the measure for singularity over a user defined minimum value. It shows a gain in performance and a better task error especially when working in proximity of singular configurations. It is particularly suitable for autonomous systems where an off-line trajectory control scheme is often not applicable. The advantage and performance of the proposed controller is verified by simulation works. And, the experiment with real manipulator is remaining for the future works.