• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.13-24
• /
• 2008

The multi robot operation technique has emerged as one of the most important research subjects that focus on minimizing redundancy in space exploration and maximizing the efficiency of operation. For an efficient operation of the multi robot systems, the movement of each Single robot in the multi robot systems should be properly observed and controlled. This paper suggests Multi Robot Management System to minimize redundancy in space exploration by assigning exploration space to each robot efficiently to take advantage of the RFID. Also, this paper has suggested fault tolerance technique that detects disable Single robot and substitute it by activated Single robot in order to ensure overall exploration and improve efficiency of exploration. Proposed system overcomes previous fault that it is difficult for central server to detect exact position of robot by using RFID system and Home Robot. Designated Home robot manages each Single robot efficiently and assigns the best suited space to Single robot by using RFID Tag Information. Proposed multi robot management system uses RFID for space assignment, Localization and Mapping efficiently and not only maximizes the efficiency of operation, but also ensures reliability by supporting fault-tolerance, compared with Single robot system. Also, through simulation, this paper proves efficiency of spending time and redundancy rates between multi robot management applied by proposed system and not applied by proposed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.320-328
• /
• 2007

This paper presents a stiffness modeling of a low-DOF parallel robot, which takes into account of elastic deformations of joints and links, A low-DOF parallel robot is defined as a spatial parallel robot which has less than six degrees of freedom. Differently from serial chains in a full 6-DOF parallel robot, some of those in a low-DOF parallel robot may be subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each serial chain can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness of an F-DOF parallel robot can be modeled such that the moving platform is supported by 6 springs related to the reciprocal screws of actuations (F) and constraints (6-F). A general $6{\times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints, The compliance of each spring can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; a link is modeled as an Euler beam and the compliance matrix of rotational or prismatic joint is modeled as a $6{\times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is infinite. By summing joint and link compliance matrices with respect to a reference frame and applying unit reciprocal screw to the resulting compliance matrix of a serial chain, the compliance of a spring is determined by the resulting infinitesimal displacement. In order to illustrate this methodology, the stiffness of a Tricept parallel robot has been analyzed. Finally, a numerical example of the optimal design to maximize stiffness in a specified box-shape workspace is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.800-808
• /
• 2008

This paper presents a localization algorithm of the outdoor wheeled mobile robot using the sensor fusion method based on indirect Kalman filter(IKF). The wheeled mobile robot considered with in this paper is approximated to the two wheeled mobile robot. The mobile robot has the IMU and encoder sensor for inertia positioning system and GPS. Because the IMU and encoder sensor have bias errors, divergence of the estimated position from the measured data can occur when the mobile robot moves for a long time. Because of many natural and artificial conditions (i.e. atmosphere or GPS body itself), GPS has the maximum error about $10{\sim}20m$ when the mobile robot moves for a short time. Thus, the fusion algorithm of IMU, encoder sensor and GPS is needed. For the sensor fusion algorithm, we use IKF that estimates the errors of the position of the mobile robot. IKF proposed in this paper can be used other autonomous agents (i.e. UAV, UGV) because IKF in this paper use the position errors of the mobile robot. We can show the stability of the proposed sensor fusion method, using the fact that the covariance of error state of the IKF is bounded. To evaluate the performance of proposed algorithm, simulation and experimental results of IKF for the position(x-axis position, y-axis position, and yaw angle) of the outdoor wheeled mobile robot are presented.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.51-56
• /
• 2013

In order to apply a biped robot in real world, the robot requires a robust walking and a function of localization, path planning and navigation. Recently, localization and path planning using RFID of mobile robot has been studying. However, when the biped robot walks, it has unstability and tends to leave the path. In the paper we propose a method of walking stabilization using FSR(Force Sensing Resistor), Gyro and accelerometer for the real biped robot. Also a path tracking algorithm using RFID sensor attached in robot's foot is proposed based on localization of the robot. The proposed algorithm is verified from walking experiments using real biped robot on uneven terrain and path tracking experiments on the RFID environments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.304-309
• /
• 2014

In this paper, we design a hybrid wheeled and legged mobile robot with a waist joint. The proposed hybrid mobile robot is designed to have a hybrid structure with leg and wheel for the efficient movement in flat and uneven surfaces. The proposed robot have a waist joint that is used to stably transform from wheeled driving to legged walking of the robot and to overcome non-flat surface. In order to recognize various environments we use LRF sensor, PSD sensor, CCD camera. Also, a motion planning method for hybrid mobile robot with a waist joint is proposed to select wheeled driving motion and legged walking motion of the robot based the environment types. We verify the efficient mobility of the developed hybrid mobile robot through navigation experiments using the proposed motion planning method in various environments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.332-340
• /
• 2013

This paper reports a programming toolkit for implementing localization and navigation of a mobile robot both in real world and simulation. Many of the previous function libraries are difficult to use because of their complexity or lack of usability. The proposed toolkit consist of functions for dead reckoning, motion model, measurement model, and operations on directions or heading angles. The dead reckoning and motion model deals with differential drive robot and bicycle type robot driven by front wheel or rear wheel. The functions can be used for navigation in both real environment and simulation. To prove the feasibility of the toolkit, simulation results are shown along with the results in real environment. It is expected the proposed toolkit is used for test of algorithms for mobile robot navigation such as localization, map building, and obstacle avoidance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.312-318
• /
• 2012

Recently, although the need of marine robots being raised in extreme areas, the basis is very deficient. Fortunately, as the robot competition is vitalizing and the need of the robot education is increasing, it is desirable to establish the basis of the R&D and industrialization of marine robots and to train professionals through the development and diffusion of marine robot kits. However, in conventional case, there is no underwater-type autonomous marine robot kit for the marine robot competition, which has the abilities of the underwater locomotion and target detection and avoidance. To solve this problem, a marine robot kit which has the abilities of the underwater locomotion, the waterproof and the weight adjustment, is developed. To verify the performance of the developed kit, test and evaluation such as surge, pitch, yaw, obstacle avoidance is performed. The test and evaluation results show that the possibility of the real applications of the developed kit.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.692-697
• /
• 2011

There are many researches to develop robots that improve its mobility to adapt in various uneven environments. In the paper, a hybrid mobile robot that can dock with the other robot and transforms between wheeled robot and legged robot is proposed. The hybrid mobile robot platform has docking device with a peg and a cup module. In addition, the robot is possible to walk and drive according to condition of the road. A navigation algorithm of the hybrid mobile robot is proposed to improve the mobility of robots using docking algorithm based on image processing on the broken road and uneven terrain. The proposed method recognizes road condition through PSD sensor attached in front and bottom of the robot and selects an appropriate navigation method according to terrain surface. The proposed docking and navigation methods are verified through experiments using hybrid mobile robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.49-51
• /
• 2005

Robot control involves advance programming, scientific and high technology. The systematic and methodological aspects of robot controls often results in having superficial control design problems that can negatively affect the robot application, usability and appeal. User friendly interface of robot control is extremely advantageous and more attractive. To illustrate, the application of medical robot is usually handled by clients who have little background in advance programming language. Thus, it would be difficult if the client needs to use programming language to control the robot. It would justify better if the robot control is presented in a meaningful interface to the client. This way the robot application would be more natural and user friendly. This paper describes the method of developing the user interface for web based communication to control an internet robot named Tarou. The web based communication tasks involves three levels. The first one accommodates on the client sending commands to robot through the internet. The next communication level relates to the robot receiving the commands sent by the client. The final communication level generates on sending feedback on status of commands by the robot to the client. The methodology used here can be elaborated in four hierarchical steps; identify user needs and robot tasks, identify the enhancing tag reference used by the server, induce the tag into HTML, present the HTML in attractive user interface as the client control panel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.227-232
• /
• 2013

BCI (Brain Computer Interface) is technology to control external devices by measuring the brain activity, such as electroencephalogram (EEG), so that handicapped people communicate with environment physically using the technology. Among them, EEG is widely used in various fields, especially robot agent control by using several signal response characteristics, such as P300, SSVEP (Steady-State Visually Evoked Potential) and motor imagery. However, in order to control the robot agent without any constraint and precisely, it should take advantage of not only a signal response characteristic, but also combination. In this paper, we try to use the fusion of motor imagery and P300 from EEG for practical use of robot control in BCI environment. The results of experiments are confirmed that the recognition rate decreases compared with the case of using one kind of features, whereas it is able to classify each both characteristics and the practical use technology based on mobile robot and wireless BCI measurement system is implemented.