• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.829-834
• /
• 2003

Many types of omnidirectional wheels with passive rollers have gaps between rollers. Since these gaps cause a wheel to make discontinuous contact with the ground, they lead to vertical and/or horizontal vibrations during wheel operation. In addition, the radii of passive rollers are related to the height of a bump an omnidirectional wheel can surmount. In this research a new design of the alternate wheel is proposed. Because this wheel makes continuous contact with the ground and has alternating large and small rollers around the wheel, it is termed a continuous alternate wheel (CAW). In this paper a design procedure is also presented to determine the optimum number of rollers, the radii of rollers and the inside inclination angle of an outer roller for given design specifications. The CAW based on this design is compared to the existing alternate wheels in terms of design. Finally, an actual continuous alternate wheel is constructed to verify validity of the design guidelines.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1309-1314
• /
• 2003

If an agent has a learning ability using previous knowledge, then it is expected that the agent can speed up learning by interacting with environment. In this paper, we present an improved reinforcement learning algorithm using domain knowledge which can be represented by problem-independent features and their classifiers. Here, neural networks are employed as knowledge classifiers. To show the validity of our proposed algorithm, computer simulations are illustrated, where navigation problem of a mobile robot and a micro aerial vehicle(MAV) are considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1485-1488
• /
• 2003

This paper proposes a wireless EMG-based human-computer interface (HCI) for persons with disabilities. For the HCI, four interaction commands are defined by combining three elevation motions of shoulders such as left, right and both elevations. The motions are recognized by comparing EMG signals on the Levator scapulae muscles with double thresholds. A real-time EMG processing hardware is implemented for acquiring EMG signals and recognizing the motions. To achieve real-time processing, filters such as high- and low-pass filter and band-pass and -rejection filter, and a full rectifier and a mean absolute value circuit are embedded on a board with a high speed microprocessor. The recognized results are transferred to a wireless client system such as a mobile robot via a Bluetooth module. From experimental results using the implemented real-time EMG processing hardware, the proposed wireless EMG-based HCI is feasible for the disabled.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1430-1434
• /
• 2003

In this paper, for the fuzzy-reaching law method which has the characteristic of elimination of chattering at sliding mode as well as the characteristic of fast response at the design of variable structure controller with reaching law, optimal solutions for the determination of parameters of fuzzy membership functions by using genetic algorithm are proposed. Generally, the design of fuzzy controller has difficulties in determining the parameters of fuzzy membership functions by using a tedious trial-and-error process. To overcome these difficulties, this paper develops genetic algorithm of an optimal searching method based on genetic operation, and to verify the validity of this proposed method it is simulated through 2 link robot manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1609-1614
• /
• 2003

This paper presents a new method driving multiple robots to their goal position without collision. To consider the movement of the robots in a work area, we adopt the concept of avoidability measure. To implement the concept in collision avoidance of multiple robots, relative distance between the robots is proposed. The relative distance is a virtual distance between robots indicating the threat of collision between the robots. Based on the relative distance, the method calculates repulsive force against a robot from the other robots. Also, attractive force toward the goal position is calculated in terms of the relative distance. The proposed method is simulated for several cases. The results show that the proposed method steers robots to open space anticipating the approach of other robots. The proposed method works as a local collision-free motion coordination method in conjunction with higher level of task planning and path planning method for multiple robots to do a collaborative job.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2725-2730
• /
• 2003

In this study we present a vibration controller for articulated robots that has flexible joints modeled as a 2-mass system. Most of articulated robots have time varying load inertias for each axis according to its motion. Moreover, the inertias vary drastically; for the base axis of articulated robots it may vary about 10 times of its minimum value. But, for industrial robots and many mechatronic devices, it is desirable to maintain control performance in spite of load inertia variation. So we propose a control gain adjustment rule considering the time-varying nature of load inertia. In this gain-adjusting algorithm, the pole locations are in proportion to the anti-resonance frequency of the 2-mass system. The simulation and experimental results show uniform properties in overshoot in spite of the variation of load.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1710-1713
• /
• 2003

We developed the synthetic library automation system. Developed system is comprised of two main units: an auto sorting system of books and a wireless management system. An auto sorting system is composed of a book return machine, a robot system, and an emergency bookshelf. A book return machine is operated by magnetic removal-revival. A wireless management system is development of RFID, or radio frequency identification, and is composed of a RF module and uninhabited return machine and a loss prevention system. The software for the synthetic library automation system is divided into three groups. We realized the developed automation system, and then get the features.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.633-638
• /
• 2003

In this paper, we propose a humanoid active audition system which detects the direction of sound and performs speech recognition using just three microphones. Compared with previous researches, this system which has simpler algorithm, fewer microphones and better amplifier shows better performance. In order to verify our system's performance, we install the proposed active audition system to the home service robot, called Hombot II, which has been developed at the KIST (Korea Institute of Science and Technology), thus we confirm excellent performance by experimental results

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.932-937
• /
• 2003

In this paper, we will explain about the unmanned vehicle control and modeling for combined obstacle avoidance and lane tracking. First, obstacle avoidance is considered as one of the important technologies in the unmanned vehicle. It is consisted by two parts: the first part includes the longitudinal control system for the acceleration and deceleration and the second part is the lateral control system for the steering control. Each system uses to the obstacle avoidance during the vehicle moving. Therefore, we propose the method of vehicle control, modeling and obstacle avoidance. Second, we describe a method of lane tracking by means of vision system. It is important in the unmanned vehicle and mobile robot system. In this paper, we deal with lane tracking and image processing method and it is including lane detection method, image processing algorithm and filtering method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.46-51
• /
• 2004

This paper presents an adaptive control method based on parameter linearization for incompletely restrained wire-suspended mechanisms. The main purpose of this control method is utilizing it in a walking assist service robot for elderly people. This method is computationally simple and requires neither end-effector acceleration feedback nor inversion of estimated inertia matrix. In the proposed adaptive control law, mass, moment of inertia and external force and torque on the end-effector are considered as components of parameter adaptation vector. Nonlinear simulation for walking an elderly shows the effectiveness of the parameter adaptation law.