• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.356-360
• /
• 2015

In this paper, we design and implement a mobile robot with variable structure for tip-over prevention. The mobile robot is designed for the purpose of stable drive and work in outdoor terrain. The outdoor terrain is rough and uneven. In this terrain, the tip-over of the mobile robot can occur while driving and working. Therefore, the structure of the mobile robot must be designed in consideration of stable drive and work. The proposed structure is defined as an X-shape for overall balance of the mobile robot. The shape is designed by using a multi-level structure for reducing the size of the robot. To verify the effectiveness of the proposed design, we analyze the tip-over characteristics according to the height of gravitational center and the extension length of the robot. Finally, we develop a prototype of the mobile robot with variable structure, taking the results of the tip-over analysis into consideration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.127-134
• /
• 2008

An autonomous reconnaissance ground robot performs its duty in various different environments such as mountain-scape, desert and under-water through changing its shape and form according to the environment it is working in. Making a prototype robot for each environment requires extra cost and time. It is also difficult to modify the problem after production. In this paper, we propose the adoption of M&S(Modeling & Simulation) environment for the production and design of the autonomous reconnaissance ground robot. The proposed method on the M&S environment contributed to the more effective and less time consuming production of the robot through the Pre-Modeling and Pre-Simulation process. For example, we showed the design and implementation of the autonomous reconnaissance ground robot under the proposed environment and tools.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.153-155
• /
• 2009

Cleaning robot system consists of four parts; navigation system for moving of robot, cleaning system, power system, and main system with cleaning algorithm. Navigation system is the most expensive part because it has motors and sensors which is high price. Navigation system is also essential to service robot system, but user should buy two systems which are service robot system and cleaning robot system. If it is possible to share navigation system, user can save money. In this paper, we design the cleaning robot system based on modular architecture.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.58-65
• /
• 2008

The study on dual arm robot manipulator which consists of two 6-DOF srms and one 2-DOF torso is introduced. This dual arm robot manipulator is designed for automation of assembly process in automotive manufacturing line. Each industrial 6-DOF arm can be used as a stand-alone type of industrial robot manipulator with 6-DOF and as a manipulator part of dual arm robot at the same lime. These structures help the robot maker willing to succeed in emerging market of dual arm robots have the high competitive power for the current industrial robot market and the emerging market of dual arm robot at the same time. The research results of the design concept, workspace analysis and the PC-based controller will be introduced.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.10a
• /
• pp.114-115
• /
• 2004

• Proceedings of the KWS Conference
• /
• 1992.04a
• /
• pp.3-9
• /
• 1992

This paper introduces the present status of application of arc welding robots, construction, engineering subjects, design requirement, example of design modification for welding by arc welding robot. As a conclusion closer cooperation of robot engineer, welding engineer and structural designer is emphasised. This is the summary of the work done by Working Group for IIW Commission XV, chaired by the author.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.337-340
• /
• 1986

A software package CARDS for general purpose robot design, control, and simulation has been developed and is presented here. CARDS (Computer Aided Robot Design and Simulation) consists of a collection of standardized subroutine modules that carry out typical kineamatic, dynamic, and control computations so that the user only needs to write a main program that further defines a particular robot configuration and the task to be performed. It provides users a complete simulation environment, so that it will be a valuable engineering tool for mechanical designers as well as electric control designers.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.232-239
• /
• 2015

Studies on the control of the inverted pendulum type system have been widely reported. This is because it is a typical complex nonlinear system and may be a good model for verifying the performance of a proposed control system. In this paper, we propose the design of some fuzzy logic control (FLC) systems for controlling a Segway-type mobile robot, which is an inverted pendulum type system. We first derive a dynamic model of the Segway-type mobile robot and then analyze it in detail. Next, we propose the design of some FLC systems that have good performance for the control of any nonlinear system. Then, we design two conventional FLC systems for the position and balance control of the Segway-type mobile robot, and we demonstrate their usefulness through simulations. Next, we point out the possibility of simplifying the design process and reducing the computational complexity,, which results from the skew symmetric property of the fuzzy control rule tables. Finally, we design two other FLC systems for position and balance control of the Segway-type mobile robot. These systems have only one input variable in the FLC systems. Furthermore, we observe that they offer similar control performance to that of the conventional two-input FLC systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.217-224
• /
• 2009

The traditional small educational multi-joint robots were developed on firmware. In these system's case, we cann't give a chance to educate good practices due on executing just robot's simple movements. But it may be possible for RTOS to control the elaborate movement of the robot with assembling each part on firmware. With this RTOS, we can enhance the efficiency of robot's movements, but too difficult to use the education as increasing the complexity of robot system. To solve the problem, we apply with Design pattern and Refactoring for the Education. Applying robot's design with Design pattern and Refactoring. There may be easily understand what and how to design RTOS for any level ones. We may easily change/upgrade RTOS for new system with this approach. This paper mentions to design RTOS with Design patterns and to apply RTOS's source code with Refactoring.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.252-254
• /
• 2005

In this paper, we present a design for URC (Ubiquitous Robotics Companion) robot S/W platform. The URC robot S/W platform is based on the Qplus/Esto which is developing in ETRI and applied for URC robot reference S/W platform that we use it in case of many different robots with same interface. We expect the platform to save the developing time, to improve the compatibility and to reuse the developed contents.