• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.398-402
• /
• 1996

This paper addresses the design and the gait control of quadruped walking robot. First, we concern the mechanical and electronical(control system) hardware of walking robot, and the second is the results of experiments. The walking robot is the most suitable form to substitute fot human being. So walking robot is worthy of research. The quadruped walking robot and control system is the simplest type of walking robot, therefore we designed a small seale robot for realization of static gait. The robot is designed commpactly and its legs are constructed parallel link type and able to move freely in space. Control system consists of one upper level controller and four lower level controllers. The upper level controller plans the walking path and commands the low level controllers to follow the planned path. The main function of low level cotrollers is control of motors. Total number of motors is twealve and they operate four legs. And robot is ordered to walk and realize static wave gait.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.166-169
• /
• 2004

In this paper show how to design a redundant robot which is suitable for the multiple task without any constraints on the workspace. The implementation is possible by the rigid connection of a mobile robot and a task robot. Use a five joint articulated robot as the task robot; designed the 3 joint mobile robot for this usage. For a task execution assigned to the redundant robot, not only the task robot but the mobile robot should work in the coordinated way. therefore, a kinematic connection of the two robots should be cleary represented in a frame. And, also the dynamic interaction between the two robots needs to be analyzed. Clarified these issues considering the control of the redundant robot. Finally, demonstrate away of utilization of the redundancy as the cooperation between the mobile robot and the task robot to execute a common task.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.10a
• /
• pp.26-27
• /
• 2005

• Journal of Ocean Engineering and Technology
• /
• v.29 no.5
• /
• pp.380-385
• /
• 2015

In the development of an underwater construction robot, the reliability of the operating system is the most important issue because of its huge maintenance cost, especially in a deep sea application. In this paper, we propose a new redundant architectural design for the hydraulic control system of an underwater construction robot. The proposed architecture consists of dual independent modular redundancy management systems linked with a commercial profibus network. A cold standby redundancy management system consisting of a preprocessing switch circuit is applied to the signal network, and a hot standby redundancy management system is adapted to utilize two main controllers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2017

This paper describes the development of a thigh wearable robot for power assistance during stair climbing. In the wearable robot developed in this study, high-power BLDC motors and high-capacity harmonic reduction gears are used to effectively assist the thigh muscle during stair climbing. In particular, normal ground and stair are distinguished accurately by using wireless smart shoes, and the stair climbing assistance is performed by activating the actuators at an appropriate time. Impedance of the hip joint was effectively reduced by performing friction compensation of the gears, and a wearing adjustment mechanism was designed to fit the robot to the thigh by conveniently modifying the width and tilting angle of the robot using set collars. Consequently, the performance of the developed thigh wearable robot was verified through stair climbing experiments with EMG measurement.

• Journal of Engineering Education Research
• /
• v.22 no.5
• /
• pp.56-62
• /
• 2019

This paper suggests the necessity of design education to engineering majors through qualitative research on the characteristics of intelligent artifacts. Robot cleaner is one of intelligent artificial objects that can approach people's life without awkwardness. How do people think of robot cleaners and define their personality, these days? In this experiment, subjects use and observe four different robot cleaners that have different appearances, behaviors and sounds in an experimental setup where is similar to actual use environment. We measure subjects' preferences and assessments for four different robot cleaners' personality. The test subjects were 11 designers who frequently collaborated with engineers and were able to express and express opinions about products. Experimental results showed that robot cleaners with the highest scores in appearance, behavior, and sound had the highest preference. In contrast, robot cleaners with low scores in three factors showed different results in the preference ranking.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.05a
• /
• pp.324-325
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.229-230
• /
• 2006

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.24-28
• /
• 2013

In this paper, a procedure of design and development of a child-sized humanoid robot is described. The design concept for a humanoid robot was proposed and the mechanism of the humanoid robot which is more than 1 meter tall was designed by using 3D design tools. By considering the lightweight of the robot, the hardware for the robot was designed for optimal performance. The frames and links of the robot designed by 3D design tools was manufactured through precision machining with the material which is light and have a good strength. The manufactured child-sized humanoid robot was experimented with basic motions applied inverse kinematics and balance control, and the performance of the motions were verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1145-1151
• /
• 2010

In this paper, we discuss the design and simulation of a jumping-robot mechanism that is actuated by SMA (shape memory alloy) wires. We propose a jumping-robot mechanism; the structure of the robot is inspired by the musculoskeletal system of vertebrates, including humans. Each robot leg consists of three parts (a thigh, shank, and foot) and three kinds of muscles (gluteus maximus, rectus femoris, and gastrocnemius). The jumping capability of the robot model was tested by means of computer simulations, and it was found that the robot can jump to about four times its own height. This robot model was also compared with another model with a simpler structure, and the performance of the former, which was based on the biomimetic design, was 3.3 times better than that of the latter in terms of the jumping height. The simulation results also verified that SMA wires can be suitable actuators for small jumping robots.