• Journal of Korea Multimedia Society
• /
• v.17 no.4
• /
• pp.514-525
• /
• 2014

We have performed a short-term computer information and communication technology education using Arduino. The purpose of this education was to progress basic training interestingly and discover excellent students. Training was about practicing basic examples about H/W, S/W, communication, and solving creative tasks. We divided training participants into a team composed of each 3 members and educated them for 10 hours. Instructors were consists of 1 main teacher and 3 teacher assistants. Training was about assembling Arduino based robot, blinking LED, operating speaker, serial communication, producing software for wireless communications and autonomous of robot, and control hardware of robot. Through this study, we developed a meaningful ICT integrated curriculum which has high usefulness in a short period. Students participated in this education completed 96% out of 10 creative tasks, and this study analyzes the result of curriculum and suggests further research directions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.946-951
• /
• 2009

The small multi-jointed robots for most education are developed with the way of firmware. But the firmware may be very difficult to develop as gradually increasing throughputs and control routines. Due to limit of firmware we try to use on RTOS, but hard to adapt on the small multi-jointed robots. It would be hard to install RTOS into the small multi-jointed robots because of the size capacity of RTOS, and lack of libraries for control of the particular hardware. Moreover, even its RTOS with many functions causes its to make overheads scheduling, TCB (Task Control Block), and task states. Also to keep maintenance of RTOS, it is composed of components for the whole structure of my proposed RTOS. Additionally, We provided with libraries of servo motor and sensor control and developed RMS (Rate Montonic scheduler) to handle tasks on real time and reduce overheads. Therefore, It is possible to work the fixed priority and task preemptive way. We show one example of the multi-jointed robot installed with my proposed RTOS, which shows to obstacle avoidance and climbing up the slope.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.183-190
• /
• 2013

Many researchers in the 21st century has found that robot education is effective to develop the learners' creativity and problem-solving ability. However, the robot education can only be applied to the students whose computer skills are high. Also it can be taught in the well-prepared computer classroom. Students have to learn machine language to control their robots, and robots are controlled by different types of software. Therefore this study has constructed command-based programming blocks to do a robot programming without computers. It also presents a prototype of the programming process and a technological method to combine the command and the programming blocks. We used the blocks which are similar with something in flow chart: to support intuition, and to help students transfer what they learned. And types of blocks and details are described for the Robot Programing Education. Combination of command blocks is made by RS-485 connection method and, it is designed to intercommunicate with connected blocks. It also presents a prototypes: of the programming process using designed command blocks, and of the possibility of Unplugged Robot Education System.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.5
• /
• pp.221-228
• /
• 2022

With the application of artificial intelligence technology, robots can provide efficient services in real life. Unlike industrial manipulators that do simple repetitive work, this study presented design methods of 6 degree of freedom robot arm and intelligent object search and movement methods for use alone or in collaboration with no place restrictions in the service robot field and verified performance. Using a depth camera and deep learning in the ROS environment of the embedded board included in the robot arm, the robot arm detects objects and moves to the object area through inverse kinematics analysis. In addition, when contacting an object, it was possible to accurately hold and move the object through the analysis of the force sensor value. To verify the performance of the manufactured robot arm, experiments were conducted on accurate positioning of objects through deep learning and image processing, motor control, and object separation, and finally robot arm was tested to separate various cups commonly used in cafes to check whether they actually operate.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.660-666
• /
• 2015

To avoid radiation exposure from repeated x-rays taken during orthopedic surgery, an x-ray permeable teleoperated Stewart platform for orthopedic fracture surgery was developed. This system is composed of a user interface device and a teleoperated operational robot, both of which use a Stewart platform mechanism. The links of the operational robot are made from an x-ray permeable material, polycarbonate, to minimize the interference. The forward and inverse kinematics algorithm applied and the structural reliability were both verified through an analysis using commercial engineering software. To monitor the operating status in real time and stop the device during an emergency, a monitoring software was developed. The performance of the x-ray permeable teleoperated Steward platform was validated experimentally.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.1-8
• /
• 2008

A two-wheel balancing vehicle, which helps people moving freely and fast, and is applied from inverted pendulum system, has been widely researched and developed, and some products are came into a market in actuality. Until now, the two-wheel balancing vehicles developed have chosen the general PID control method. In this paper, we propose a new control method to improve a control capacity for a two-wheeled balancing vehicle for human transportation. The proposed method is the fuzzy PD+I control that is one of the improved PID control, and it contains a 2input-1output fuzzy system. This fuzzy system processes signals from proportional and derivative controller, and the fuzzy output signal generates the final output by summing up integral signal. The non-linearity of the fuzzy system makes an optimal output control signal by changing weight of the proportional signal and the derivative signal in process of time. We have simulated the fuzzy PD+I control system and experimented by implementing the two-wheel balancing mobile robot to verify the advantages of the proposed fuzzy PD+I control method in comparison with general PID control. As the results of simulation and experimentation, the proposed fuzzy PD+I control method has better control performance than general PID in this system and improves it.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.10
• /
• pp.37-42
• /
• 2014

This paper discusses study of sensorless control of a variable speed switched reluctance motor (SRM) for electric AC compressors on electrical vehicles. A typical SRM drive requires a position sensor such as an encoder or hall sensor to measure the angular rotor position. However, harsh environment in electrical AC compressors for electric vehicles makes it difficult to use the position sensor in their motor drive system. Therefore, a sensorless control scheme for electric compressor motors utilizing magnetic characteristics of SRM with respect to position angle and phase current is proposed. The overall variable speed SRM drive with position sensorless control scheme has been modeled using Matlab/Simulink software and closed loop current control simulation is presented to validate the proposed sensorless drive control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.46.2-46
• /
• 2001

A method of interactive human interface for motion modification of an articulated object model like a human body, a multiple joints robot, etc. has been developed, and implemented to a human body motion model. In the case of computer software models, the initial data setting for overall motion is rather easy. However, modifying or correcting the initially set motion is rather difficult for keeping consistency. In this research, the requirements shown below have mainly been set as the specifications ...

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.642-645
• /
• 1991

This paper presents the results of research on hardware and software of the landmark tracking system to the positions of moving robot in real time. The landmark tracking system is composed of CCD camera, landmark, strobo system and image processing board. The algorithm calculates the position and direction by using the coordinate transformation fomula after calculating the centroid and rotation angle of landmark at fixed position using the image data. The experiment is performed with landmark tracking system is loaded on xyz-table. XYZ-table is used for identifying the true position in our experiment. The results shows that this system has high performance with maxima error of .+-.1 pixels.

• Smart Media Journal
• /
• v.1 no.1
• /
• pp.58-63
• /
• 2012

It is a superordinate concept to a network control system which optimally distributes the battery power to overall length parts through the linkage control drive and absorbs/integrates network diagnostics and overlapped functions with overall length control systems. This study is to develop a system that maximize the battery power and motor effectiveness by controlling motor battery controlling module with common MCU Integration linkage controlling system, and to develop S/W and H/W that can be controlled by linked with each controlling module in CAN method through using Autosar's standardized software.