• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.28-34
• /
• 2007

In design stage of vehicles, the application of virtual durability analysis techniques enables us to cut down the necessary time and cost to carry out various physical experiments. In this study, computer simulations of vehicle suspensions were carried out with DADS program including component flexibility, and the durability analysis of vehicle components was executed with MSC/Fatigue program using the load history obtained from vehicle dynamic simulation. Driving test of a vehicle was also carried out to obtain precise input data for the durability analysis, and the results of virtual durability analysis were compared to those of experiments.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.110-115
• /
• 2010

This paper studies the vibration characteristics of a vehicle seat on several driving conditions. Modal test for a vehicle seat is conducted for the three different boundary conditions: on the rigid jig, BIW and the full vehicle. In driving on various road conditions and speeds, vibration level is measured at several locations including seat mounting and seat-back. The vibration pattern for each driving condition is found where the suspension mode and the 1st bending and torsion modes of the seat make the major contribution on it.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.59-64
• /
• 2002

When the vehicle travels in an actual road, resistance spot weldments of the vehicle structure are exposed to complex loading state. Since the fatigue strength in resistance spot weldment of vehicle body can be determined by effect of residual stresses and loading state of driving, estimating actual loading state and considering residual stress effect are needed. In this study, Fatigue stress-fatigue life relation concerned residual stress effect was obtained by thermo elastic plastic finite element analysis. And applied loading in resistance spot weldments of vehicle body was calculated by dynamic analysis. Presumption of fatigue life was performed using proposed method

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.809-817
• /
• 2008

This paper describes an obstacle detecting system of an unmanned ground vehicle (UGV). The unmanned ground vehicle is consists of several systems such as vehicle control system, navigation system, obstacle detecting system and integration system. Among these systems, the obstacle detecting system is a driving assistance system of UGV. Through the UGV is driving, the system detects obstacles such as cars, human, tree, curb and hills and then send information of obstacles position to integration system for safety driving. In this research, the obstacle detecting system is composed of 5 laser scanners and develop algorithms of detecting obstacles, curb, uphill and downhill road.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.679-688
• /
• 2008

This paper presents an algorithm capable of detecting leading vehicles using a forward-looking camera. In fact, the accurate measurements of the contact locations of vehicles with road surface are prerequisites for the intelligent vehicle technologies based on a monocular vision. Relying on multistage processing of relevant edge features to the hypothesis generation of a vehicle, the proposed algorithm creates candidate positions being the left and right boundaries of vehicles, and searches for pairs to be vehicle boundaries from the potential positions by evaluating horizontal symmetry. The proposed algorithm is proven to be successful by experiments performed on images acquired by a moving vehicle.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.558-563
• /
• 2003

The tracked vehicle travel on off rod and on rod. So the tracked vehicle need a sufficient stiffness and a lightweight. In this study we performed FEA for the track vehicle and performed topology optimization based on the results of FEA. The displacements of road wheel are used as displacement constraint for topology optimization. We performed topology optimization with the control of the frame size which is the results of topology optimization and suggested the shaped of the tracked vehicle bottom plate of topology optimization

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.48-53
• /
• 2012

A non-linear vehicle model and an observer are designed to observe the yaw rate and the body side slip angle when a vehicle is turning maneuver in this study. The developed vehicle model is a full car model and has fourteen degree of freedom. A Luenberg observer is applied to develop the observer. The vehicle model is validated with a reference result and shows good accordance. The observer is tested on dry asphalt, wet asphalt and snow paved road. The results prove the performance of observer is robust and reliable.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.113-122
• /
• 2012

PURPOSES: The sensitivity of $CO_2$ emissions per vehicle by a various speeds is compared according to the type of roads. METHODS: The methodology of the study are as follows: First, the sensitivity of $CO_2$ emissions per vehicle are analyzed by averaged daily travel speeds. Second, the sensitivity of $CO_2$ emissions per vehicle are analyzed by averaged hourly travel speed. Third, the sensitivity of $CO_2$ emissions per vehicle are analyzed by sectional travel speeds. RESULTS: The sensitivity that on Saturday in a week, at peak times in a day and in close location from Seoul was higher than in other situations. CONCLUSIONS: From this study, we may conclude that $CO_2$ emissions per vehicle at low speeds are generally more sensitive.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1695-1696
• /
• 2008

KRRI (Korea Railroad Research Institute) is developing a bimodal tram since the 2003s. The vehicle will be used in the public transportation system. The bimodal tram has the advantages of both bus and train. Bus system has the advantages of flexibility of the routes delivering passengers to the destination and easy accessibility. Train is to meet the scheduled arrival and massive public transportations. The vehicle is the rubber tired tram and is all wheel steered single articulation. The propulsion system is configured by CNG hybrid system. The length of the vehicle is 18m. The vehicle lanes will be marked with permanent magnets that are buried in the road. The vehicle can be automatically operated by navigation control system (NCS). In this paper, we introduce the driving system of the bimodal tram which is developed by KRRI.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.23-28
• /
• 2014

Commercial vehicle ESC assessment for curvature road was conducted. The previous study of ESC activation condition for losing controllability utilizing the test protocols of double lane change and sine with dwell method was conducted without considering the geometric complexity of roadway design. Since critical rollover accidents were frequently observed in the exit ramp zone, variety of curve, slope and bank have been added for analysis conditions. Detailed feature of the ramp including location, dimension and design characteristics have been analyzed from the typical trumpet type ramp design. Analyzing accident data from 2008, two specific ramps have been selected due to their complexity in design and severity in steering operation.