• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.93-101
• /
• 2021

In this paper, a vehicle license plate detection scheme is proposed that uses the spatial attention areas to detect accurately the license plates in various real-road situations. First, the previous WPOD-NET was analyzed, and its detection accuracy is evaluated as lower due to the unnecessary noises in the wide detection candidate areas. To resolve this problem, a vehicle license plate detection model is proposed that uses the candidate area of the license plate as a spatial attention areas. And we compared its performance to that of the WPOD-NET, together with the case of using the optimal spatial attention areas using the ground truth data. The experimental results show that the proposed model has about 20% higher detection accuracy than the original WPOD-NET since the proposed scheme uses tight detection candidate areas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.465-468
• /
• 2022

The incidence of traffic accidents is increasing every year, and Korea is among the top OECD countries. In order to improve this, various road traffic laws are being implemented, and various traffic control methods using equipment such as unmanned speed cameras and traffic control cameras are being applied. However, as drivers avoid crackdowns by detecting the location of traffic control cameras in advance through navigation, a mobile crackdown system that can be cracked down is needed, and research is needed to increase the recognition rate of vehicle license plates on the side of the road for accurate crackdown. This paper proposes a method to improve the vehicle number recognition rate on the road side by applying a gradient correction algorithm using image processing. In addition, custom data learning was conducted using a CNN-based YOLO algorithm to improve character recognition accuracy. It is expected that the algorithm can be used for mobile traffic control cameras without restrictions on the installation location.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.175-179
• /
• 2023

This paper analyzes the vibration characteristics within the cargo compartment of a three-wheeled cargo bike when used on both regular roads and dedicated bicycle lanes. When cargo is loaded into the cargo compartment of a cargo bike and driven on the road, the shocks and vibrations transmitted from the ground can potentially affect the transported goods and even lead to product damage. As the vibration characteristics applied to the cargo compartment may vary depending on the condition of the road, vibration sensors were attached to the cargo bike's cargo compartment for data collection during operation on different road types. According to KS T ISO 13355 standards, the cargo bike can withstand vibrations within the range of 10 Hz to 60 Hz when operating on both bicycle lanes and regular roads. However, it is observed that there are peaks exceeding the profile in the frequency range of 3-6 Hz. In the 70-200 Hz range, the profile is exceeded on both regular roads and bicycle lanes, with a tendency for higher exceedance on bicycle lanes. The Grms value within the frequency range of KS T ISO 13355 is 5.926 m/s² (0.604 Grms). When operating on bicycle lanes with cargo, the Peak envelope optimization PSD value is 6.553 Grms, while on bicycle lanes, it is 7.708 Grms, indicating a difference of at least tenfold.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.23-31
• /
• 2016

PURPOSES : This study aimed to offer a greenhouse gases table to assist a road designer in calculating the greenhouse gases for a road environment when making a decision about an alternative road. METHODS : This study developed an operation mode table of greenhouse gases using the MOVES program. Similar factors for Korean vehicles and fuels are reflected in the MOVES program, which was made in the USA. Finally, a paired t-test was conducted to calculate the site data and MOVES data. Through these studies, a methodology was suggested for calculating carbon emissions based on various types of roads alignments. RESULTS : The site results for a passenger truck on the road were statistically significant when the vehicle speed was above 65 km/h. However, a future study will consider factors for various road alignments and vehicles. CONCLUSIONS : This study will contribute to the theoretical basis for reducing carbon emissions from roads by helping road designers make decisions about road alternatives in terms of the road environment.

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.96-105
• /
• 2017

Global warming, mainly caused by CO2, is one of the on­going cataclysms of the human race. The nation­wide policy to reduce greenhouse gases (GHG) has been enforced, for which it is crucial to estimate reliable GHG emissions. The unit load of road­section CO2 emission (URSCE) is a prerequisite for the evaluation of GHG emissions from road mobile source, and it is mainly computed using vehicular velocity source. Unfortunately, there is real­world limitations to collect and analyse representative speed data for nation­wide road network. To tackle this problem, a method for the evaluation of URSCE, proposed in this study, is based on a disaggregated way using big GPS vehicle data. The method yields more accurate URSCE than an current aggregated data based approach and can be directly employed for nation­wide road systems.

• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.109-114
• /
• 2022

The article is devoted to analyzing the police influence on road safety formation. The globalization processes confirm the study's relevance, provoking population mobility and the need to increase freight traffic. The study aims to identify the factors that affect road safety and the activities of the police and the EU transport safety units. An empirical analysis using factor analysis, correlation analysis, and general scientific methods of cognition were carried out to achieve the goal. The analysis results found that the number of police officers affects road safety, but not in all countries, which confirms the importance of other factors. Based on the analysis results of the scientific literature, the factors affecting transport safety are legislative regulation, the use of innovative technologies, transport infrastructure, geography, and psycho-physical and emotional drivers factors. It has been proved that the police authorities and units cannot fully ensure transport safety in the European Union because the safety is formed by a complex of actions by the state and road users.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.265-275
• /
• 2023

The purpose of this paper is to devise an optimal route allocation algorithm for automated vehicle(AV) in monitoring quality of road infrastructure to support the road safety. The tasks of an AV in this paper include visiting node-links at least once during its operation and checking status of road infrastructure, and coming back to its depot.. In selecting optimal route, its priority goal is visiting the node-links with higher risks while reducing costs caused by operation. To deal with the problem, authors devised reward maximizing algorithm for AVs. To check its validity, the authors developed simple toy network that mimic node-link networks and assigned costs and rewards for each node-link. With the toy network, the reward maximizing algorithm worked well as it visited the node-link with higher risks earlier then chinese postman route algorithm (Eiselt, Gendreau, Laporte, 1995). For further research, the reward maximizing algorithm should be tested its validity in a more complex network that mimic the real-life.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.47-52
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under road-load condition and interior noise signal is transformed by using the transient signal analysis methods such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise criteria such as the loudness, noisiness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running mode can be discussed in the viewpoint of noise quality.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.499-502
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under transient road-load condition and interior noise signal is transformed by using the transient signal analysis methods, such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise metrics such as the loudness, sharpness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running modes can be discussed in the viewpoint of noise quality.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.447-452
• /
• 2012

Among the various elements affecting a customer's evaluation of automobile quality, buzz, squeak and rattle (BSR) are considered to be major factors. In most vehicle manufacturers, the BSR problems are solved by find-fix method with the vehicle road test, mainly due to various excitation sources, complex generation mechanism and subjective response. The aim of this paper is to develop the integrated experimental method to systematically tackle the BSR problems in early stage of the vehicle development cycle by resolving these difficulties. To achieve this aim, the developed experimental method ought to include the following requirements: to find and fix the BSR problem for modules instead of a full vehicle in order to tackle the problem in the early stage of the vehicle development cycle; to develop the exciter system including the zig and road-input-signal reproducing algorithm; to automatically localize the source region of BSR; to develop sound quality index that can be used to assess the subjective responses to BSR. Also, the BSR sound quality indexes based on the Zwicker's sound quality parameters using a multiple regression analysis. The four sound metrics from Zwicker's sound quality parameter are computed for the signals recorded for eight BSR noise source regions localized by using the acoustic-field visualized results. Then, the jury test of BSR noise are performed for participants. On a basis of the computed sound metrics and jury test result, sound quality index is developed to represent the harsh of BSR noise. It is expected that the developed BSR detection system and sound quality indexes can be used to reduce the automotive interior BSR noise in terms of subjective levels as well as objective levels.