• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.14-19
• /
• 2012

On-line and real-time information of the longitudinal velocity is the essential factor for the Advanced Vehicle Control Systems such as ABS(Anti-lock Brake System), TCS(Traction Control System), ESC (Electronic Stability Control) etc. However, the longitudinal velocity cannot be easily measured or calculated during braking maneuvering. A new algorithm is presented for the estimation of the longitudinal velocity with the measurements of the vehicle longitudinal/lateral acceleration, steering angle and yaw rate. The algorithm is designed utilizing the Extended Kalman Filter based on the 3 degree of freedom vehicle model. In order to compensate for the biased sensor signal on the inclined road, the inclined angle is also estimated. The performance of the proposed estimation algorithm is evaluated in field tests.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.59-67
• /
• 2014

A numerical model and a controller of Active Front wheel Steer (AFS) system are designed in this study. The AFS model consists of four sub models, and the AFS controller uses sliding mode control and PID control methods. To test this model and controller an Integrated Dynamics Control with Steering (IDCS) system is also designed. The IDCS system integrates an AFS system and an ARS (Active Rear wheel Steering) system. The AFS controller and IDCS controller are compared under several driving and road conditions. An 8 degree of freedom vehicle model is also employed to test the controllers. The results show that the model of AFS system shows good kinematic steering assistance function. Steering ratio varies depends on vehicle velocity between 12 and 24. Kinematic stabilization function also shows good performance because yaw rate of AFS vehicle tracks the reference yaw rate. IDCS shows improved responses compared to AFS because body side slip angle is also reduced. This result also proves that AFS system shows satisfactory result when it is integrated with another chassis system. On a split-m road, two controllers forced the vehicle to proceed straight ahead.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.339-348
• /
• 2017

Due to recent improvements in computer processing speed and image processing technology, researches are being actively carried out to combine information from a camera with existing GNSS (Global Navigation Satellite System) and dead reckoning. In this study, the mathematical model based on SPR (Single Photo Resection) is derived for image-based assistant algorithm for vehicle positioning. Simulation test is performed to analyze factors affecting SPR. In addition, GNSS/on-board vehicle sensor/image based positioning algorithm is developed by combining image-based positioning algorithm with existing positioning algorithm. The performance of the integrated algorithm is evaluated by the actual driving test and landmark's position data, which is required to perform SPR, based on simulation. The precision of the horizontal position error is 1.79m in the case of the existing positioning algorithm, and that of the integrated positioning algorithm is 0.12m at the points where SPR is performed. In future research, it is necessary to develop an optimized algorithm based on the actual landmark's position data.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1450-1457
• /
• 2003

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of durability, noise/vibration/harshness (NVH), crashworthiness and passenger safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer. In this study, we used the Virtual Proving Ground (VPG) approach for obtaining the dynamic stress or strain history and distribution. The VPG uses a nonlinear, dynamic, finite element code (LS-DYNA) which expands the application boundary outside classic linear, static assumptions. The VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic stress and fatigue critical region, a single bump run test, road load simulation, and field test have been performed. The prediction results were compared with experimental results, and the feasibility of the integrated life prediction methodology was verified.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.3
• /
• pp.226-235
• /
• 2006

Telematics is expected to be one of the fastest growing businesses in information technology area. It may create a new emerging market in industry related to automotive, telecommunications, and information services. Especially vehicle navigation service is considered as a killer application among telematics service applications. The current vehicle navigation service typically recommends a single path that is based on the traveling time or distance from the origin to the destination. The system provides two options for users to choose either via highway or via any road. Since the traffics and road conditions of big cities are very complicated and dynamic, the demand of multi-path guidance system is increasing in telematics market. The multi-path guidance system should allow drivers to choose a path based on their individual preferences such as traveling time, distance, or route familiarity. Using the Lawler's algorithm, it is possible to find multiple paths; however, due to the lengthy computational time, it is not suitable for the real-time services. This study suggests a computationally feasible and efficient heuristic multiple paths finding algorithm that is reliable for the real-time vehicle navigation services.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.45-50
• /
• 2008

The purpose of the present study was to investigate the age difference in driving behavior(more specifically, left-turn). The participants were instructed to report whether they can turn left their car in the T-shape road(road and other vehicles' behavior relating to driver's tasks were recorded in advance and projected the simulation screen) after the leading vehicle passed them(i.e., before the target vehicle arrived). The participants' judgment accuracy and response bias were analyzed by using signal detection theory. The results showed that the old group tended to be less sensitive but more confident in their judgement of turning left their car. In particular, both age groups appeared to more depend on the distance from observation location to approaching vehicle rather than arrival times or driving speeds of the approaching vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.797-804
• /
• 2016

The vehicle-mounted radar system (VMRS) including its electronic parts must be designed so that its performance is maintained under varying environmental conditions. The important aspects are typically weight and safety. Since many rotating VMRSs have been developed, discussion about the vibration and shock requirements for the transportation conditions has occurred: in addition, the dynamic unpaved, paved, and off-road effects have been emphasized with respect to lightweight designs. A lightweight-design VMRS should be capable of operating stably under the wind condition with the support of the vehicle structure. In this paper, a structural analysis regarding the support of the VMRS is performed, whereby the real-load conditions for three types of road and pressure were employed in terms of the wind condition. The structural analysis for the safety of the VMRS is performed, and the structural-integrity analytical processes of the VMRS are presented for different load conditions.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.783-793
• /
• 2010

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or propagate useful traffic information to other vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collisions at the link layer due to an excessive number of broadcast packets. We present a fuzzy alert message dissemination algorithm to improve performance for road safety alert application in Vehicular Ad-hoc Network (VANET). In the proposed algorithm, when a vehicle receives an alert message for the first time, the vehicle rebroadcasts the alert message according to the fuzzy control rules for rebroadcast degree, where the rebroadcast degree depends on the current traffic density of the road and the distance between source vehicle and destination vehicle. Also, the proposed algorithm is the hybrid algorithm that uses broadcast protocol together with token protocol according to traffic density. The performance of the proposed algorithm is evaluated through simulation and compared with that of other alert message dissemination algorithms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.76-84
• /
• 2003

Now days, It is based on GIS and GPS, it can search for the shortest path and estimation of arrival time by using the internet and cell phone to driver. But, even though good car navigation system does not create which is the shortest path when there average vehicle speed is 10 -20 Km. Therefore In order to reduce vehicle waiting time and average vehicle speed, we suggest optimal green time algorithm using fuzzy adaptive control, where there are different traffic intersection length and lane. In this paper, it will be able to forecast the optimal traffic information, estimation of destination arrival time, under construction road, and dangerous road using internet.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1248-1251
• /
• 2002

Logistics optimization problems related with vehicle routing such as warehouse locating, track scheduling, customer order delivery, wastage pickup etc. are very interesting and important issues to date. Many Vehicle Routing and Scheduling Systems (VRSS) have been developed/proposed to optimize the logistics problems. But majority of them are dedicated to a particular problem and are unable to handle the real world spatial data directly. The system developed for one problem may not be suitable for others due to inter-problem constraint variations. The constraints may include geographical, environmental and road traffic nature of the working region along with other constraints related with the problem. So the developer always needs to modify the original routing algorithm in order to fulfill the purpose. In our study, we propose a general-purpose platform by combining GIS road map and Database Management System (DBMS), so that VRSS can interact with real world spatial data directly to solve different kinds of vehicle routing problems. Using the features of our developed system, the developer can frequently modify the existing algorithm or create a new one to serve the purpose.