• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.136-138
• /
• 2000

The vehicle emissions of primary air pollutants are described by the emission factor (EF), defined as the emitted mass (g) of a compound per distance (km) and vehicle. The EF can be determined by exhaust measurements from single vehicles in dynamometric tests. However, the EF of a large number of vehicles has to be measured to obtain the representative results for actual road traffic emissions. Road traffic emissions can also be determined by exhaust measurements of driving vehicles or in tunnel measurements. (omitted)

• 도로교통
• /
• s.83
• /
• pp.63-66
• /
• 2001

"An intergrated Modeling System for the Estimation of Motor Vehicle Emissions" by Theodoros Zareharidis and Zissis Sameras. JOURNAL of the Air & Waste Management Association.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2016

Vehicular communications is system which can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In recent years, a variety of ITS services are available such as driving information, road conditions, V2X messages as well as navigation and traffic jams notification. In general, vehicular communications can be used for vehicle-to-vehicle and vehicle-to-infrastructure communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments. In this paper, WAVE communication standard based on the IEEE802.11p is explained and signal characteristics in WAVE communication is introduced. Also, The H/W and S/W characteristics in Road Side Station and On Board Equipment for the Vehicle to Everything communication are analyzed. Received Signal Strength which is power of receiving signal of communication equipment is measured in test road to estimate the real WAVE communication's performance. It is shown that the implemented WAVE communication technology is satisfactory to provide ITS services.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.9-16
• /
• 2017

In this paper, we introduce a warning message providing methodology by considering the elderly's walking behavior in V2P(: Vehicle-to-Pedestrian) communication systems. Using the elderly's accident records in Kyounggi-do area from 2011 to 2014, the elderly's accident behaviors are analyzed by categorizing accidents as road type (single road/ crossing road), existence of traffic signal (with signal/ without signal), existence of crosswalk (crosswalk/ jaywalk), cause of accident (jaywalk/ signal violation/ carelessness accident/ Etc.). In addition, the elderly's behavior variable and vehicle speed are applied, then some threshold values are utilized in a warning message providing in conflict area. Finally, we propose a distance which can protect an accident depending on the elderly's walking speed, safety margin and vehicle speed. By applying the results of this research to the V2P/P2V communication based road safety message providing system with the elderly's walking behavior, it may be helpful to reduce accident rate of the elderly.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.274-278
• /
• 2016

A road energy harvester was designed and fabricated to convert mechanical energy from the vehicle load to electrical energy. The road energy harvester is composed of 20 piezoelectric materials. This study attempted to evaluate output depending on pavement materials when paving road piezoelectric energy harvester in the road. Harvester is the bender type and is the method of supporting the both ends of piezoelectric material and applying the load in the middle part. Harvester was paved in the type paved with asphalt, type paved with cement and in the exposed type not covering the top of harvester. The output characteristics were compared and evaluated depending on changes in vehicle load and vehicle speed changes. As vehicles, truck (11.9 ton), SUV(1.6 ton) and sedan (1.5 ton) were used and the output characteristics when driving at the interval of 10 km/h from 10 km/h to 100 km/h were evaluated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.208-218
• /
• 2017

This study aims to develop the Vehicle Local Dynamic Map (V-LDM) and demonstrate its performance for providing dynamic map data efficiently to the vehicle control module. Firstly, the concept of the in-vehicle LDM has been established and then the system has been carefully designed according to the international standards. The high-precision digital map embedded in LDM has been designed to incorporate the lane-level information of road network, and the Dynamic Map protocol (DM protocol) which is a message protocol including the road data with dynamic traffic event data has been defined. The performance test of the proposed system has been conducted in the uninterrupted road section of Kyungbu expressway, showing that both of the data size and the elapsed time to finish the process are almost linearly proportional to the length of target road. Finally, it is recommended that the length of target road for DM protocol be less than 250m.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.121-129
• /
• 2011

The purpose of this study is to determine the relationship between observed traffic data and NOx concentrations from not an ideal condition but a real road in real-time. Also we aim to develop an estimation model for NOx emission concentrations due to vehicle exhaust gas, and it can be applied to monitor the degree of air pollution on National Road in real-time. To eliminate outliers which are occurred due to errors of equipments and other variables, we use the robust analysis and develop two models. which are considering and not considering wind impact. The result of this research can be used for understanding present condition of air pollution caused by vehicle exhaust gas and evaluating for environmental effects of transportation policy.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.159-167
• /
• 2013

PURPOSES : In this study, the effects of when median exclusive bus lanes were applied to Daejeon trunk road (Wolpyeng crossway~Seodaejeon crossway, 6.3km) and (Daeduck Bridge 4~Kyeryong 4, 2.6km) by Microscopic Simulation VISSIM (5.0) was studied. The median exclusive bus lanes are one of the measures of transportation system manage techniques that can especially improve the efficiency of public transportation facilities. METHODS : According to the analysis of VISSIM on the Gyerong mainroad and Daedeok mainroad, when the median exclusive bus lanes were applied unlike when the roadside bus-only lanes were applied, the average travel speed of vehicles decreased but the average delay time and travel time increased. This arised from the changes in the geometric structure of the road which occurred the reduction of vehicle lane in the center of the road. RESULTS : In the case of bus, on the other hand, the average travel speed increased but the average delay time and travel time decreased. This is because the problems such as illegal parking and stopping, secondary road in out vehicle, and conflict of intersection right turn that roadside bus-only lanes occurred was solved. CONCLUSIONS : Although the introduction of median exclusive bus lanes will have a negative effect on general traffic flow due to the aggravation of travel, decrease of passenger car usage will lead to decrease of traffic volume. Therefore, smooth vehicle travel is expected.

• Journal of Korean Society of Transportation
• /
• v.8 no.2
• /
• pp.7-25
• /
• 1990

In road traffic, road circumstances, vehicle, and driver are closely related each other. When road facilities are established in road planning, only road structure has been considered. However, relatively little work has been done regarding the relation between road circumstances and human with respect to a driver. This dissertation focuses on analysis of driver's visual characteristics to improve road circumstances. In this study, driver's visual characteristics are measured with eye-mark recorder and analyzed statistically. This study includes that visual characteristics, visual range, visual time, distribution of fixation duration, and visual moving angle with respect to road circumstances are established qualitatively and quantitatively by driving testing vehicle on streets, roads and high-ways. The main features of this study are : The driver's visual ranges are different over 10% depending on lane in multi-lanes. The visual range on two-lanes is more than twice as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by speed are $34^{\circ}$ for 30-50km/hr, $28^{\circ}$ for 50-70km/hr, $22^{\circ}$ for 70-90km/hr and 16^{\circ} for over 90km/hr at 95% of visual rate. Accordingly, increasing speed results in narrow visual range.