• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.133-140
• /
• 2016

The Ministry of Land, Infrastructure and Transport has introduced low-floor buses, which are convenient for passengers getting on and off the bus and for the handicapped. The standard bus model is 11 m long and uses compressed natural gas (CNG). However, this model has drawbacks in narrow rural road conditions such as those in farming and fishing villages and mountainous areas, as well as difficulty in refueling since CNG facilities are not readily available. In this study, running resistance values were obtained by coasting performance tests on actual roads using a Tata Daewoo LF-40 model with three different weight conditions: curb vehicle weight (CVW), half vehicle weight (HVW), and gross vehicle weight (GVW).The test methods include WHVC, NIER-06, and constant-speed driving at 60 km/h. These tests were used to measure the fuel economy of vehicles other than the target vehicles to obtain the combined fuel economy. The energy efficiency was highest in the case of CVW. In the WHVC mode, the fuel consumption rates of HVW and GVW were typically 3.5% and 12% higher than that of CVW, respectively. In constant-speed driving, the fuel efficiency of HVW was higher than that of CVW. Further research is required to analyze the exhaust gas data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.1-6
• /
• 2012

Recent trend of pursuing smart life began to affect the usage of vehicle in real life. The next generation of the smart vehicle services start to utilize telecommunication technology and sensing techniques for the advanced safety and efficient use of road for drivers, while there's still decency in satisfaction about vehicular safety upgrade. For this purpose, a new technology is devised as Wireless Access in Vehicular Environment(WAVE). Foreign industries now are developing technologies of key components, platform and services related to WAVE. Domestic industry just starts to develop the related technologies about WAVE, although the frequency for WAVE is not allocated. This paper introduces the status of technical standards for WAVE and the status of developing components of WAVE. And this paper also proposes the guidance of frequency allocating policy for WAVE through frequency interference experiments.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.181-187
• /
• 2011

Since 2003, state transportation study core technology development is being promoted as part of the bimodal trams operating in accordance with the development of refractive vehicle as research infrastructure for building high-tech road transport system has been the research and development. Bimodal trams of refraction as the vehicle for him to introduce domestic first ever operation management system also developed in Korea according to case-based technology system, but most of the country, and, in this study, mainly those based on technology integration building management system and the bimodal trams of refraction of a vehicle operated was to highlight the features and benefits. Bimodal tram station itself is the way the exclusive properties and to operate the route with large transport capacity has the characteristics of the railway, but the only routes such as railroad lines is not of closed roads under certain circumstances, the flexibility to use has to be integrated operations management system of bimodal trams characteristics of the railroads and public transportation by combining the characteristics of a flexible, convenient and secure services to users with the aim of providing research and will denote the system developed. In this study, bimodal integration system required for the operation of the tram station around the wired and wireless network management center, applying the organic integration into one system so that you have to be centrally managed. In addition, the existing traffic management system operates as a unidirectional rather than monitoring all system-wide management via the interactive network through real-time requests and responses were configured to allow management and control. These findings of the existing traffic operation management system that you can jump step can be based on future unmanned vehicles and related systems through control of the operation management system will be offered as a basis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.3
• /
• pp.51-60
• /
• 2001

The travel behavior can be analysed microscopically using GPS because the travel characteristics can be found out by travelling two test cars loaded with GPS equipments. The speed difference and spacing variation between the lead vehicle and the following's in uninterrupted flow are the important variables related to capacity and safety. This study analysed these with data obtained by travelling the 4th Line and 28th Line of the national road. The variation width in speed difference in the run time is below 3.0%. But, related to the speed difference in the situation of acceleration and deceleration the difference after 4second is bigger than that just after the start. The spacing variation is similar to this. The spacing just before deceleration concerning safety was analysed. When the theoretical values by the modeling method and observed values were compared, the observed values were analysed 12.52% shorter than the other in average.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.103-111
• /
• 2016

This paper presents an adaptive variable weights tuning system for an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) for lateral stability enhancement. After calculating the control yaw moment needed to stabilize a vehicle with a controller design method, it is distributed into the tire forces generated by ESC and AFS using weighted pseudo-inverse-based control allocation (WPCA). On a low friction road, lateral stability can deteriorate due to high vehicle speed. To cope with the problem, adaptive tuning rules on variable weights of the WPCA are proposed. To check the effectiveness of the proposed method, a simulation was performed on the vehicle simulation package, CarSim.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.105-117
• /
• 2004

CVO(Commercial Vehicle Operations) of Intelligent Transport Systems is the system to manage effciently cargo distribution as providing at real time the information of cargo location and situation through nS and GPS technology. In this paper, we proposed the Gate Automation System of harbors among AVI/AEI. To implement this system, we use the DSRC(Dedicated Short Range Communication) which adopts an wireless communication between RSE(Road-side Equipment) and OBE(on-Board Equipment) on a vehicle. When constructing the automation gateway system of harbors, the business application ability are reviewed practically and the logistics facilities to be constructed in the near future nay use this paper results according to the international standard and it could help complete integrated logistics system.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.63-72
• /
• 2014

In this paper, characteristics and types of vehicle accidents involving buses that differ from common passenger cars are analyzed. When heavy vehicles are involved in collision accidents, the external impulse conveyed through bus tire from road surface cannot be ignored, so the conventional rigid-body impact model cannot be applied. As a solution, an analysis model which directly considers the tire impulse or considers the bus as moving barrier has been proposed. Also, as there are many instances in which the location of contact point or coefficients related to rotational motion cannot be estimated, utilization of point-mass collision model has been sought. By applying the proposed analysis model to an actual accident case and comparing with the result of the conventional analysis which does not consider the tire impulse, it is shown that the velocity of bus and other values close to the actual amount can be obtained.

• KDI Journal of Economic Policy
• /
• v.28 no.2
• /
• pp.179-198
• /
• 2006

This paper estimates relationships between the supply of national highways, measured in lane-km, and the quantity of traffic, measured in vehicle-km traveled. The analysis uses a panel data set of annual observations for the years 1984 to 2003. By using a log-linear lag effect model designed to capture short and long term effects, the paper estimates that national highway vehicle-km traveled has a lane-km elasticity of 0.268 at the country level (Non-Seoul Metropolitan area) and 0.41 at the Seoul metropolitan area for the short term. For the long term, the paper estimates 0.8 for the country level and 1.23 for the Seoul metropolitan area. This paper finds conclusive evidence that increases in highway lane-miles have generated traffic over the period of study, however the increasing ratio of the generated traffic decreases gradually, particularly during the late 1980s.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.10a
• /
• pp.234-235
• /
• 2004

현재 자동차의 변화를 이끄는 흐름에서 가장 핵심이 되고 있는 유형 Sport Utility Vehicle은 전천후 기동성 측면과 Sports성을 중심적인 특성으로 다루고 있다. 그러나 SUV로서 off road 중심의 공간 활용 보다는 실내 공간 중심의 활용이 더욱 중요한 특성으로 자리잡고 있다. 이러한 경향은 주 5일 근무 정착에 따른 여가 시간의 증가와 아울러 보다 다양한 직업과 생활 패턴 등에 따라 더욱 두드러질 것으로 보인다. 이러한 근 미래 변화에 대응하는 방법으로 기존의 SUV type에서 탈피하여 sports성을 반영하는 동시에 보다 utility적 활용 중심의 특성을 가지는 XUV (eXtreme Utility Vehicle)라는 새로운 유형을 2010년 시점의 근 미래 테크놀러지와 조형성의 동향 예측, 사용자 요구점 분석 포지셔닝 등을 통해 제안한다.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.9-20
• /
• 2011

Most of domestic expansion joint system was applied by exposed expansion joint system. There are cases where it is damaged by driving. As the result noise and impact happened, and the social cost due to frequent repair works is increasing. So based on the Asphalt Plug Joint(APJ) system that applied in the United States and Europe, new buried expansion joint system was lately developed a system of Buried Folding Lattice Joint(BFLJ) that changed substructure. In this research, we have tested for durability and flexibility performance of buried expansion joint system that based on the type of asphalt mixture. Also we have evaluated for durability of BFLJ system against vehicle load using accelerated pavement testing. As a result of the experiment, the developed BFLJ system gives high flexibility performance and resolves transformation concentration along the joint section more than APJ system. Also it could be seen that the BFLJ system could overcome the disadvantages of APJ and prevent early damage. Because surface deflection of BFLJ system against vehicle load was measured low, and sub system in the buried expansion joint system was not damaged against vehicle load.