• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.125-129
• /
• 2007

In this paper, a PMS(Pavement Management System) application is presented to control the LCC(Life Cycle Cost) of road pavement. The aim of this paper is to provide the decision makers with the planning information regarding maintenance strategies for efficient road pavement management. The validity of PMS application presented in this paper is investigated through case studies for conducted for 22 national highway road sections in Korea.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.59-64
• /
• 2003

As the economy of a country develops, the necessity for social overhead capital such as railroad, highway and other transportation infrastructures becomes an utmost issue as the volume of traffic increases. As the standard of living has been raised the needs for ecological road pavement also increase. As a matter of fact, the concrete and asphalt pavement have been constructed without considering the harmony with nature. The Road Compound pavement is constructed with local soils from optimum mixture proportions that did not contaminate the surroundings and represent the ecological pavement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.197-203
• /
• 2003

Korea Highway Corporation(KHC) began the ambitious KHC Test Road construction project from 1997. It is 7.7km long two-lane highway next to the mainline of Jungbu Inland Expressway. The KHC Test Road construction was completed at the December 2002. It is composed of twenty-five PCC test pavement sections. Section design parameters are (1) concrete slab thickness, (2) base type, (3) base thickness (12, 15, and 18cm), and (4) pavement type. Twenty-five PCC test pavement sections contain 1241 sensors to evaluate the behavior of pavement system under traffic load and environmental change. The behavior of pavement systems will be identified by the observation of sensor measurement and pavement distress survey from test pavement sections. The Test Road research outcome will validate the Korean Pavement Design Guide which is develop by on-going funded research from the Ministry of Construction and Transportation.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.153-162
• /
• 2017

PURPOSES : This study was conducted to analyze the effects arising from extending the duration of nighttime road construction on improving road quality and durability. METHODS : Most previous studies estimating the social cost of various construction conditions did not consider road pavement cooling time as a factor in improving road pavement quality. This study investigated the feasibility of achieving higher road quality and durability by extending the duration of nighttime road construction time extension. For this investigation, the effects of such an extension on traffic conditions were analyzed based on micro-simulation studies and scenario-based cost-benefit analyses, using factors including traffic volume, delay, construction cost, and road pavement cooling time. RESULTS : The results of the traffic simulation studies and cost-benefit analyses indicate that the current road construction method that emphasizes completing nighttime road construction by 6 a.m. reduces pavement life while causing relatively little traffic delay. If the night construction time is instead extended to 2 p.m., road pavement lifetime is increased, reducing road re-construction cost. These savings are greater than the cost of congestion arising from extending the duration of nighttime construction. CONCLUSIONS : The current nighttime construction durations need to be extended in order to efficiently manage roads and reduce road management costs.

• Advances in Computational Design
• /
• 제7권4호
• /
• pp.371-393
• /
• 2022

This paper presents a three-dimensional flexible pavement simulated in ANSYS subjected to moving vehicular load on the surface of the pavement typical for the road section in Nepal. The adopted finite element (FE) model of pavement is validated with the classical theoretical formulations for half-space pavement. The validated model is further utilized to understand the damping and dynamic response of the pavement. Transient analysis of the developed FE model is done to understand the time varying response of the pavement under a moving vehicle. The material properties of pavement considered in the analysis is taken from typical road section used in Nepal. The response quantities of pavement with nonlinear viscoelastic asphalt layer are found significantly higher compared to the elastic pavement counterpart. The structural responses of the pavement decrease with increase in the vehicle speed due to less contact time between the tires of the vehicle and the road pavement.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.49-56
• /
• 2016

PURPOSES : In this study, noise reduction effect of a two-layer porous asphalt pavement was investigated through site measurement and computer simulation. METHODS : To examine noise reduction effect, a 3 km long quiet pavement was installed by removing previous normal pavement, which had a rather low porosity. The studied site was a high-rise apartment building surrounded by the quiet pavement and Seoul ring road with heavy traffic volume, indicating relatively high background noise. RESULTS : The measurement result before and after installing the quiet pavement showed a noise reduction effect of 4.3 dB(A) at a distance of 7.5 m from the road. After validating the accuracy of simulation using SoundPLAN, the reduction in SPL(sound pressure level) at the facades by the quiet pavement was predicted by considering five different road conditions generating traffic noise from each road or in the combination of the quiet pavement and Seoul ring road. In the case of no noise from Seoul ring road, noise reduction at the facades was 4.2 dB(A) on average for 702 housing units. With background noise from Seoul ring road, however, the average SPL decreased to 2.0 dB(A). Regarding subjective response of noise, the number of housing units with a noise reduction of over 3 dB(A) was 229 out of 706 units (approximately 32%). For 77 housing units, the noise reduction was between 1~3 dB(A), while it was less than 1 dB(A) for 400 housing units. CONCLUSIONS : The overall result indicates that the quiet pavement is useful to reduce noise evenly at low and high floors compared to noise barriers, especially in the urban situation where background noise is low.

• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.103-111
• /
• 2010

에너지 절약과 $CO_2$발생량의 절감을 위해 자전거의 이용을 적극 장려하고 있다. 이를 위해 다량의 신설 자전거 도로 건설 계획을 추진 중에 있다. 현재 국내에서 신설 자전거도로 건설을 위해 아스팔트포장 및 콘크리트 포장을 비롯하여, 반강성포장, 유색포장, 흙포장 등이 적용되고 있다. 하지만 이들 포장형식은 자전거도로의 요구 성능에 비하여 시공비용이 높다. 본 연구에서는 경제적이고 친환경적이며 내구성을 확보한 자전거도로포장으로써 롤러 다짐 콘크리트의 최적 다짐율과 배합비를 기초물성시험을 통해 검토하였다. 도출된 배합비에 대한 동결융해와 제설제 저항성 시험을 통해 환경저항성을 검토하였다. 추가적으로 경제성 및 $CO_2$발생량을 일반콘크리트포장과 비교를 통해 평가했다.

• 한국도로학회논문집
• /
• 제6권3호
• /
• pp.47-54
• /
• 2004

도로-포장시스템의 성능은 구성재료 및 기계적 물리화학적 하중에 대한 재료의 민감도에 매우 관련이 깊다 그러나 지금까지 오염원 침투에 따른 도로-포장시스템의 물리적 화학적인 영향에 대한 연구가 깊이 있게 다루어지지 않았다. 이에 대한 연구를 위해 본 논문에서는 도로-포장시스템과 오염원 및 주변환경적 요인과의 상호작용에 대한 고찰이 선행적으로 다루어졌다 도로-포장시스템으로 오염원은 1) 포장표면으로 직접 침투하거나, 2) 도로 경계 면으로 침투하거나 3) 물리적-화학적-생물학적 변화에 의한 흙 사이로의 간접 침투로 이루어진다. 오염원침투가능성은 재료종류. 입자크기. 기후 및 지질학적 특성에 관련이 깊다 도로-포장시스템의 안정성 및 성능 또한 오염원 침투에 의해 영향을 받는다 이와 같은 특성들을 고려 할 때 도로 설계 시공 및 유지보수와 관련된 일을 하는 공학자들은 이 문제를 심각하게 고려하여야 할 것이다.

• 한국재난정보학회 논문집
• /
• 제8권2호
• /
• pp.119-137
• /
• 2012

본 연구는 서울시 도로포장의 구조적 개선을 위하여 포장관리시스템을 이용하여 도로파손 발생과 도로포장 상태를 분석하였다. 심층면접조사에서는 플랜트, 시공 및 감리 분야 실무자 의견을 통하여 서울시 도로포장 관리의 문제점을 도출하였으며, 선진 도로포장 관리 사례를 조사하여 서울시 도로포장 관리의 개선방안을 모색하였다. 주요 결론으로는 서울시 중하중과 여름철 집중호우에 대한 도로파손에 대한 대책이 필요하고 생애주기비용 분석을 통하여 획일적인 덧씌우기 공법으로 인한 도로포장의 조기파손의 문제점을 확인하였다. 설문조사결과, 실무자에 대한 교육의 강화와 아스팔트 혼합물 생산 및 시공시 보다 철저한 온도 관리의 필요성이 제기되었다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.113-126
• /
• 2017

PURPOSES : This study proposes standards for rural access road pavement section and thickness design considering existing access road construction conditions; the study also proposes a complementary policy that can be used for design convenience. METHODS : Various literature review and case studies had been performed in terms of rural access road section and thickness design, both domestically and internationally, and this was followed by domestic rural access road field surveys. KPRP and KENLAYER were used to analyze the commonalities and predict the remaining life. Data on real cost is used to select an appropriate construction method through economic analysis. RESULTS : The economic efficiency of concrete pavement ($15{\times}15$) was the highest in terms of economic efficiency of performance life and traffic volume. In the case of asphalt pavement, it is considered that the most economical method is to implement micro-surfacing method four times as a preventive maintenance method (once every 10 years and 4.5 years for asphalt concrete pavement and MS construction method, respectively). Repairable asphalt pavement is advantageous for areas where heavy vehicles are expected to pass. In the case of other general areas, it is considered economical to place concrete ($15{\times}15$) pavement. However, as analytical results on its performance life are unavailable, it is to be considered for study in the future. CONCLUSIONS : This study proposed interim design guidelines based on various domestic and international design guidelines and case studies. However, in order to develop the final design criteria applicable to the field, it is necessary to (a) estimate the bearing capacity of the lower level of the pavement at various sites, (b) estimate the daily traffic volume, (c) implement advanced low-cost pavement technologies, and (d) propose maintenance standards and techniques for long-term performance.