• Korean Business Review
• /
• v.21 no.2
• /
• pp.137-170
• /
• 2008

This study is presenting the logistics strategy in the international logistics markets which makes competition and corporation among north-east Asian countries to establishing the multi-pass Eurasian railroads. The countries located in north-east area of Eurasia like China, Japan, Russia and Korea are paying higher costs and disutility to the transportations and communications due to repeated conflicts and confrontations causes from the politic problems. They are being used surface transportation for most of all logistics between Europe and Asia except special merchandises because of characteristic of cargo to be air, the Silk Road remains vestige only which was main logistic passage to this area since BC. So far the Trans-Siberian Railway is being used by Russia mostly as north of Eurasian transport because of difficulties of service. The Trans-China Railway built in 1992 is not accomplishing as a international logistic passages. It is expected to take a long lead time because of characteristic of resource development and poor logistic infrastructure to the countries like Uzbekistan, double landlocked country, Mongolia and Azerbaijan, the countries do not be adjacent to the sea, even they have great economic jump-up plans through the development of their own resources. The Shanghai Cooperation Organization(SCO) start to sail officially in 2001 is constructed with China, Russia, Tadzhikistan, Kyrgyzstan, Kazakhstan and Uzbekistan as regular members of 6 countries and Mongolia, India, Pakistan, Afghanistan and Iran as observers 5 countries. It is started as a military alliance to protect terror, but now, it is expended to cooperate with the traffic, transportation, trade and share of energies. The Russia is doing their best to activate TSR as a government target to developnorth area equivalently, and economic develop of far-east Siberia. And also it is agreed provisionally to improve and repair of rail road between Nahjin and Hassan to connect TSR and TKR( Trans-Korea Railroad) by Russia, North Korea and South Korea with Russian's aggressive efforts. The development plan of this area is over lapped with GTI(Greater Tumen Initiative) promoted by UNDP, and is a cooperated project by 5 countries of South Korea, Mongolia, China, Russia and North Korea, subject to review the appropriation of energy, tour, environment, rail road connection between Mongolia and China and establishing a ferry route to north-east Asia. It is Japanese situation to pay attention to Russia and China even they have been supplying large-scope of infrastructure in Mongol area without any charges, target to get East Asia Main Rail Road to connect Mongolia and Zalubino of Russia. In case of the program for the Denuclearization of North Korea is not creeping, it will be accelerated to connect the TKR and TSR, TKR and TCR by somehow attending United States, including developing program promoted by UN ESCAP. As the result, Korean peninsular will continue the central role of competition and cooperation as in the past, now and future of north-east Asia, as of geographical-economics and geographical-politics whether it is requested or not wanted by neighbor countries.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.1-11
• /
• 2020

The purpose of this study is to conduct an analysis for classification of unexecuted urban planning facilities using the Geographic Information System(GIS) to prepare measures for systematic and efficient management of unexecuted urban planning facilities and to find ways to establish national territory information for continuous management and operation by database of spatial data of classified unexecuted urban planning facilities. For this purpose, the present state of urban management plan, thematic map, cadastral map, satellite image of Korea Land Information System(KLIS) were collected from Miryang City, and qualitative analysis of the execution and non-execution of urban planning facilities was conducted by combining the layer of urban planning facilities, satellite images, and continuous cadastral layers of cadastral maps with classified and processed owner attribute information. According to the analysis, the unexecuted facilities were derived as unexecuted facilities, as most of the private land, without any current status roads or facilities created in satellite imagery. In addition, although the current status road was opened, the facilities that included some private land were derived as facilities that were recognized and executed by the local government as the de facto controlling entity through public transportation. The derived unexecuted urban planning facilities were divided into layers of shape data and the unexecuted property data were organized to quickly and accurately identify the status of non-executed and statistical information. In this study, we proposed an analysis plan that introduced GIS technology for scientific and rational analysis of unexecuted urban planning facilities and the establishment of reliable spatial data, and proposed a plan to establish a database for connection with existing systems and use of information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.18-25
• /
• 2020

With the development of water internet technology, data communication between objects is expanding. Research related to data communication technology between vehicles that incorporates related technologies into vehicles has been actively conducted. For data communication between mobile terminals, data stability, reliability, and real-time performance must be guaranteed. The 5 GHz Wi-Fi band, which is advantageous in bandwidth, communications speed, and wireless saturation of the wireless network, was selected as the data communications network between vehicles. This study analyzes how to design and implement a 5 GHz Wi-Fi network in a vehicle network. Considering the characteristics of the mobile communication terminal device, a continuous variable communications structure is proposed to enable high-speed data switching. We simplify the access point access procedure to reduce the latency between wireless terminals. By limiting the Transmission Control Protocol Internet Protocol (TCP/IP)-based Dynamic Host Configuration Protocol (DHCP) server function and implementing it in a broadcast transmission protocol method, communication delay between terminal devices is improved. Compared to the general commercial Wi-Fi communication method, the connection operation and response speed have been improved by five seconds or more. Utilizing this method can be applied to various types of event data communication between vehicles. It can also be extended to wireless data-based intelligent road networks and systems for autonomous driving.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2011

This study is aimed at suggesting a plan for creating a landscape environment by grasping a landscape preference according to the change of middle span and sag ratio which is a consideration factor when designing the suspension bridge representing long-span bridges and image property of the bridge while applying SD method to a relation between landscape preference and image factor, and a connection of design element with image factor. An analysis on landscape preference about the bridge landscape showed from what the longer the length of middle span, the extent of sag ratio of preference decreased, the longer the middle span low sag ratio was preferred and the higher the landscape preference became. In landscape preference and image factor, the attribute of sag ratio with high landscape preference was all positively correlated with "stability", "plasticity", and "aesthetic" but an influence of "plasticity" was insignificant. In the relation between design element and image factor, the factor of middle span and sag ratio was more related to the factor of "stability" and the lower the sag ratio and the longer the middle span, the higher the "stability" was rated. This result showed the image property of "plasticity" was insignificant among the one of preference in landscape and to highlight the one of "plasticity" a complementary experiment was done with a change in balance and symmetry elements not in proportional element of middle span and sag ratio. The result showed the image property of "plasticity" was more highlighted in the suspension bridge of 3-tower and different bilateral symmetry at sag, and when designing the landscape of suspension bridge later on, the elements of balance and symmetry as well as the proportional element should be considered and reflected in the design.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2015

Developed in this study were Octagonal-hollow-section(OHS) struts, whose compressive strengths against flexural and local buckling is higher than H-shape or rectangular-hollow-section(RHS) struts with the same unit weight. OHS members are also advantageous in handling and storing compared to circular hollow sections(CHS). OHS members were fabricated from HR Plates by cold forming and fillet welding. 5 numbers of 20m long OHS struts were assembled, each of which consist of two 9.6m long OHS member and two end connection elements made of cast iron. The compressive strength of the OHS strut was evaluated by comparing the test results, design codes and FEM analysis each other. Test results show that all of the struts have almost same or larger compressive strength than Korean Road Bridge Design Code(KRBDC) (2012). The initial imperfections can be estimated by using measured strains and are turned out to be less than L/450 for all the struts tested. The results of FEM analysis show that the variation of initial imperfection has less effects on the compressive strength for struts with vertical surcharge than for those with self-weight only, while the strength decreases as the initial imperfection increases. As the result of this study, the allowable initial imperfection for 20m long OHS struts is recommended to be less than L/350 on job sites.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.15-36
• /
• 2015

The purpose of this paper is "A Study on the Establishment of Distribution and Logistics System in the unified Korea". The main conclusion of this paper are as follows : North and South Korea shall conjunctionally foster the exchange and cooperation area and operate the joint pilot project to combine distribution and logistics system. To solve the problems of the maritime affairs, Fisheries, and international logistics, the cooperative agreement between North and South Korea will be needed to protect and develop of shipping, aviation and shipbuilding industry. Unification of two Koreas must be prepared as stage by stage ; ${\cdot}$Stage1(preparation period) : initiation of peace area. ${\cdot}$Stage2(development period) : forming the exchange and cooperation area ${\cdot}$Stage3(settlement period) : establishing peace belt on border area. After the unification, two Koreas must plan and undertake the construction of the distribution and logistics infrastructures, establishment of SCM system through Network and the connection to China through railway and road Network.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.157-168
• /
• 1999

This paper analyzed vegetation and land use classification, slope and permanent preservation and legal reserves on the farm Jangada and Jamaica-Mato Grosso do Sul, Brazil, using satellite image for assisting the planning of planting Eucalyptus spp. This part of the State of Mato Grosso do Sul represents an important geopolitcal area, since it is located on the borders of Bolivia and Paraguay. Also exportation of goods can be achieved through hydrovias extending to Buenos Aires, Argentina-through the Paraguay River. Also there are road and railroad connection which link the soutreastern part of Brazil to the Andean countries. The vegetation map from sheet SF 21-Campo Grande of the RADAMBRASIL Project was used as the basis for the preliminary interpretation of coverage, and complemented by a visit of the field. After the initial interpretation of the image, definition of classes of use and land occupation were made, and files of spectral signatures were created. On the farms Jamaica and Jangada Open Arboreal Savanna and Grass Savanna are the predominant physiognomies occupying 68% of total area. In spite of the results being satisfactory at the present moment, the development of this project should be revised and adjusted based on the evaluations already made, including a greater detailing of environmental components, principally with respect to soil and topography.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.129-139
• /
• 2009

The transportation network is a critical infrastructure in the event of natural and human caused disasters such as rainfall, snowfall, and terror and so on. Particularly, the transportation network in an urban area where a large number of population live is subject to be negatively affected from such events. Therefore, efficient traffic operation plans are required to assist rapid evacuation and effective detour of vehicles on the network as soon as possible. Recently, ubiquitous communication and sensor network technology is very useful to improve data collection and connection related emergency information. In this study, we develop a specific algorithm to provide evacuation route and detour information only for vehicles under emergency situations. Our algorithm is based on shortest path search technique and dynamic traffic assignment. We perform the case study to evaluate model performance applying hypothetical scenarios involved terror. Results show that the model successfully describe effective path for each vehicle under emergency situation.

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.303-313
• /
• 2001

A cut-slope near Guam-Ri Hwado-Eup Namyangju-Si Kyunggi-Do collapsed during a heavy rainfall over 400mm at 28th of August 2000. The cut-slope collapse reportedly developed mainly by block sliding along a set of discontinuities, although slope angle of the cut-slope was 40$^{\circ}$(1:1.2) that agrees with the road construction criteria. This study aims to analyze differences and correlations among several data-collecting methods limited to discontinuity analysis related with cut-slope collapse. This study started with analysing discontinuity surface characteristics, geology of the country rock and orientations of the discontinuities directly related with the collapse. Analysis of aerial photos around the study area provided regional lineament data, and discontinuity plane description and measurements were collected from core logging and Borehole Image Processing System (BIPS). Spearmans correlation ranking coefficient method was used to get correlation of discontinuity planes according to analysis methods. The result suggests that the correlation coefficient is ${\gamma}_s$ = 0.91 Plus, stability analysis of discontinuity plane orientation data using equal-area stereonet revealed that the study area is unstable to planar failure. This study suggests that the cut-slope angles currently applied should be shallower and that significant attention is required to orientation distribution of discontinuities existed in cut-slopes studies.

• Archives of design research
• /
• v.17 no.3
• /
• pp.313-322
• /
• 2004

Product design has direct effects on sales, exciting consumer's interest in purchasing. With the draft bill of Road Traffic Law passing the National Assembly, drivers have been entirely prohibited by the law from using a cell phone while driving since June 30, 2001, As a result, the demand for and the sales of hands-free Kit products for vehicles have been skyrocketing, and more and more of them have been introduced in the market and competing each other in sales. In these situations, the study attempted to present a case study showing the whole process of product design by a small company, which intended to gain an advantage over the competitors in the sector of hands-free products for vehicles with differentiated design. The product whose design development process was presented in the study has many characteristics. Among them it is the most remarkable in removing the connection between the cell phone terminal and the stationary hands-free product. The study was aimed to increase the investment value of design by helping understand that the ultimate goal of technology is commercialization and that how great the role of design is from the beginning to the final stage of product development. It also emphasized the point that one of the goals of design development should lie in providing a more accurate perception of the importance of design to the industry, by establishing a design process throughout the whole stages of product development including initiation, designing and commercialization.