• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1231-1234
• /
• 2005

For the purpose of objective and scientific inspection, traffic accidents should be appraised and inspected by righteous material evidences, computer simulation, and studies such as automobile engineering, traveling and collision accident dynamics, road and traffic engineering. In this paper, it displays the results of studying cases with the reasons of traffic accidents by analyzing and studying automobile kinetics, real traffic accidents and the results of in scientific and objective ways. In this paper, it is proved that with compared by dry and wet road surface condition, the transient brake time of wet condition is longer than dry road condition. Moreover, compared with unpacked road condition and packed road condition. unpacked road condition is shorter than packed road condition using computer simulation.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.173-180
• /
• 2016

OBJECTIVES : Fixed roadside objects are a threat to drivers when their vehicles deviate from the road. Therefore, such roadside objects need to be suitably dealt with to decrease accidents. This study determines the factors affecting the severity of accidents because of fixed roadside objects. METHODS : This study analyzed the crash severity impact of fixed roadside objects by using ordered probit regression as the analysis methodology. In this research, data from 896 traffic accidents reported in the last three years were used. These accidents consisted of sole-car accidents, fixed roadside object accidents, and lane-departure accidents on the national highway of Korea. The accident severity was classified as light injury, severe injury, and death. The factors relating to the road and the driver were collected as independent variables. RESULTS : The result of the analysis showed that the variables of the crash severity impact are the collision location (left side), gender of the driver (female), alcohol use, collision facility (roadside trees, traffic signals, telephone poles), and type of road (rural segments). Additionally, the collision location (left side), gender of the driver (female), alcohol use, collision facility (street trees, traffic signals, telephone poles), and type of road (rural segments), in order of influence, were found to be the factors affecting the crash severity in accidents due to fixed roadside objects. CONCLUSIONS : An alternative solution is urgently required to reduce the crash severity in accidents due to fixed roadside objects. Such a solution can consider the appropriate places to install breakaway devices and energy-absorbing systems.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.84-89
• /
• 2013

The main causes of traffic accidents can be classified by 3 factors - human error, vehicle deficiency and road environmental problem and most accidents occurs not only 1 factor but combination of 2 or 3-factors. Among these factors, road environmental factor is the most important factor due to influence the behavior of cars and road users and road environmental factor affects 30% of total accidents approximately. The 5 years traffic accidents data analyzed to verify the accidents severity on Korea National Highways. In order to analyze the severity, Ordered Probit Model was used. As a independent variables of this model the number of lane, neighbor road environments, sight distance, vertical grade, lane width, shoulder width and traffic volume were used and as a dependent variables the minor injuries, serious injuries and fatalities were used. Research results shows that sight distance and lane width are identified as significant factors for the traffic accident severity and lesser sight distance and lane width shows greater traffic accident severity.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.143-154
• /
• 2014

PURPOSES : This study drew factors affecting motorcycle accidents in Seoul by severity using an ordered probit model and aimed to analyze and verify the drawn influence factors. METHODS : As the severity of the accidents could be classified into three types (fatal injury, serious injury and minor injury), this study drew the factors affecting accidents by a comparative analysis employing an ordered probit model, removed the variables that would not secure significance sequentially to construct a model with high explanatory power regarding the factors affecting the severity of motorcycle accidents, and calculated the marginal effect of each factor to understand the degree of each factor's impact on the severity. First, Model 1 put in all variables; Model 2 was constructed by removing the variables of the road surface conditions that could not meet the level of significance (p=0.608); Model 3 was constructed by removing gender variable (p=0.423); and Model 4 was constructed finally by removing age variable (p=0.320). RESULTS : As a result of an analysis, statistically significant variables were time of occurrence, type of accident, road alignment and motorcycle displacement, and it turned out that the impacts on the severity were in the following order: a road alignment of left downhill, the type of motorcycle-to-vehicle accidents and a road alignment of a flatland on the left. The significance of the models was tested using the likelihood ratio, the level of significance and suitability statistics about them, and as a result of the test, the significance level and suitability of the constructed models were all excellent. In addition, the model accuracy indicating the accuracy of a predicted value compared to that of the value actually observed was 70.3% for minor injury; 70.1% for serious injury; and 68.6% for fatal injury, and the overall accuracy was 70.2%, which was very high. CONCLUSIONS : As a result of an analysis of motorcycle accidents in Seoul through the ordered probit model and the marginal effect, it turned out that their severity increased in nighttime accidents as compared to daytime ones and gradually increased in the order of motorcycle-to-vehicle accidents, motorcycle-to-person ones and the ones involving motorcycle only. As a result of an analysis, the severity of accidents in road alignments of left downhill, left flatland and straight downhill increased as compared to those in a road alignment of straight flatland and that the severity of accidents of motorcycles with a displacement larger than 50cc was higher than that of those with a displacement smaller than 50cc.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.186-196
• /
• 2010

It has been well known that traffic accidents occur under combined functional contributions of drivers, vehicles and road facilities, and that evaluation of safety levels for a specific road section or point is generally much complicated. Additionally, most of traffic accidents occur randomly implicating it is necessary to be evaluated in terms of probability theory. Thus, the evaluation model which reflects various characteristics and probabilistic distributions of traffic accidents has been necessary. The present paper provides a reliability based model with variables of probabilistic operating speeds and design speeds together which have been individually explaining associated characteristics in traffic accidents. Consequently, the model made it possible for speed management and road improvement projects to be evaluated in a common index. Application studies were performed in three cases. Through the studies, couples of facts were identified that the model successfully considered the probabilistic operating speeds and design speeds together and that then, the model evaluated road safety alternatives relatively which are complicatedly characterized and differently located.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.128-137
• /
• 2006

Traffic accidents occur due to complex influences of transportation companies, drivers, and road environment. This study found that education and surroundings for transportation companies, driving habits of drivers, and road safety facilities and accessory facilities were main factors that affected strongly traffic accidents. Also, it found that driving habits of drivers could affect accidents heavily more than two other factors. Road safety and accessory facilities were analysed that they affected traffic accidents independently with transportation companies and their own drivers. Therefore, in order to achieve a traffic accident prevention as our main target, those companies need to produce atmosphere that their own drivers can have safety awareness, and related institutions for the above target should run parallel with policy assistance and strict traffic enforcement. In the end, this study suggests that transportation companies should secure manpower wholly being charged with traffic safety and financial resources investing in it.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.2
• /
• pp.27-33
• /
• 2024

In this study, an analysis was conducted on internal and external factors related to fires in electric vehicles in order to improve the safety of electric vehicles against fire accidents. To conduct the analysis, field survey data conducted on actual electric vehicle fire accidents were used, and accident-related statistical data was used. Among them, as a result of analyzing the internal factors related to fire accidents in electric vehicles, it was confirmed that high-voltage batteries are an important factor in fire accidents caused by internal factors of electric vehicles. An analysis of external factors for fire accidents of electric vehicles was also conducted in this study. The largest number of electric vehicle accidents that occurred on public roads were mainly caused by physical external forces such as collisions. Therefore, strengthening the safety of this road infrastructure could be an additional solution to improve the fire safety of electric vehicles. As a result, based on car accident cases, two crash scenarios based on road infrastructure were derived, each of which simulates a high-speed frontal collision situation and a lower-end collision situation. Additionally, detailed test methods for these scenarios were developed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.85-96
• /
• 2023

The number of traffic accidents caused by wet or icy road surface conditions is on the rise every year. Car crashes in such bad road conditions can increase fatalities and serious injuries. Historical data (from the year 2016 to the year 2020) on weather-related traffic accidents show that the fatality rates are fairly high in Korea. This requires accurate prediction and identification of hazardous road conditions. In this study, a forecasting model is developed to predict the chances of traffic accidents that can occur on roads affected by weather and road surface conditions. Multiple deep learning algorithms taking into account AlexNet and 2D-CNN are employed. Data on orthophoto images, automatic weather systems, automated synoptic observing systems, and road surfaces are used for training and testing purposes. The orthophotos images are pre-processed before using them as input data for the modeling process. The procedure involves image segmentation techniques as well as the Z-Curve index. Results indicate that there is an acceptable performance of prediction such as 65% for dry, 46% for moist, and 33% for wet road conditions. The overall accuracy of the model is 53%. The findings of the study may contribute to developing comprehensive measures for enhancing road safety.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.113-120
• /
• 2010

In case the traffic accident occurs, skid mark is very important factor to calculate the car speed. Especially, for the purpose of objective and scientific inspection, traffic accidents should be appraised and inspected by righteous material evidences, computer simulation, and studies such as automobile engineering, traveling and collision accident dynamics, road and traffic engineering. In this paper, it displays the results of studying cases with the reasons of traffic accidents by analyzing and studying automobile kinetics, real traffic accidents and the results of in scientific and objective ways. After computer simulation result that it is proved that compared with unpacked road condition and packed road condition. unpacked road condition is shorter than packed road condition.