• 한국안전학회지
• /
• 제30권3호
• /
• pp.1-6
• /
• 2015

Self-piercing riveting (SPR) is receiving more recognition as a possible and effective solution for joining automotive body panels and structures, particularly for aluminum parts and dissimilar parts. In this study, static strength and fatigue tests were conducted using coach-peel and cross-tension specimens with Al-5052 plates for evaluation of fatigue strength of the SPR joints. For the static experiment results, the fracture modes are classified into pull-out fracture due to influence of plastic deformation of joining area. During the fatigue tests for the coach-peel and cross-tension specimens with Al-5052, interface failure mode occurred on the top substrate close to the rivet head in the most cycle region. There were relationship between applied load amplitude $P_{amp}$ and life time of cycle N, $P_{amp}=715.5{\times}N^{-0.166}$ and $P_{amp}=1967.3{\times}N^{-0.162}$ were for the coach-peel and cross- tension specimens, respectively. The finite element analysis results for specimens were adopted for the parameters of fatigue lifetime prediction. The relation between SWT fatigue parameter and number of cycles was found to be $SWT=192.8N_f^{-0.44}$.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.703-713
• /
• 2001

Mechanical joints such as bolted or riveted joints are widely used in structural components and the reliable determination of the stress intensity factors for corner cracks in mechanical joints is needed to evaluate the safety and fatigue life. This paper analyzes the mixed-mode stress intensity factors of surface and deepest points for quarter elliptical corner cracks in mechanical joints by weight function method and the coefficients included in weight function are determined by finite element analyses for reference loadings. The extended form of the weight function method for two-dimensional mixed-mode to three-dimensional is presented and the number of terms in weight function is determined by comparing the results for the different number of terms. The amount of clearance is an important factor in evaluating the severity of elliptical corner cracks in mechanical joints and even horizontal crack normal to the applied load is under mixed-mode in the case that clearance exists.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.841-850
• /
• 2008

본 연구에서는 탄소 복합재와 알루미늄 2024-T3 단일겹침 체결부에 대해, 체결방법을 접착, 리벳, 리벳/접착 하이브리드의 세 가지로 변화시키면서 체결방법에 따른 파손하중과 파손모드를 실험을 통해 연구하였다. 세 가지 체결방법에 대해 각각 겹침길이 3가지와 적층순서 2가지, 총 82개의 시편을 제작하였다. 접착제는 FM73m, 리벳은 NAS9308-4-03을 사용하였다. 접착 체결과 하이브리드 체결에서는 겹침길이가 커짐에 따라 파손하중이 증가하였고, 리벳 체결에서는 겹침길이에 따른 파손하중 변화가 나타나지 않았다. 단순 접착 및 리벳 체결부에서는 적층순서에 따른 일관된 경향을 발견하기 어려운 반면, 하이브리드 체결부에서는 인접층의 적층각 차이가 작은 적층판을 사용한 체결부의 파손하중이 높게 나타났다. 접착 체결과 하이브리드 체결의 주된 파손모드는 층간분리이고 리벳 체결은 국부적 베어링 파손을 동반한 리벳 파손으로 나타났다.