• 한국건축시공학회지
• /
• 제15권4호
• /
• pp.425-431
• /
• 2015

1978년에 고리 1호기의 건설이 완공된 이래로 원자력 발전 플랜트의 건설 프로젝트는 국내 외로 점차 확대되고 있다. 그러나 일부 원자력 발전 플랜트의 건설 현장에서는 리스크 관리 능력의 부족으로 인하여 공기 지연과 공사비 손실의 문제점들을 가지고 있다. 특히, 원자력 발전 플랜트 내 원자로격납건물의 시공은 타 시공 단계에 비해 긴 공정기간으로 인하여 전문기술과 대규모 자원이 요구됨에 따라 많은 리스크 요인들이 산재될 수 있다. 따라서 원자로격납 건물의 시공에서 예상되는 리스크 요인들을 분석하여 전체 프로젝트의 안정적인 수행 방향을 제시하는 연구가 필요하다. 그러므로 본 연구는 원자로격납건물 시공의 리스크 요인들을 평가하고자 한다. 이를 위하여 본 연구는 36명의 소수 전문가 집단을 대상으로 하는 설문조사방법을 활용하였다. 24개의 리스크 요인들은 공정, 원가, 안전, 품질을 기준으로 분류되었으며, 이에 대한 평가 결과는 계층 분석방법을 활용하여 분석하였다. 이를 바탕으로 각 기준별로 분류된 리스크 요인들은 중요도와 우선순위를 산정하고 원자력 발전 플랜트의 시공 리스크 요인을 분석하는데 계층분석 방법의 적용성을 확인하였다. 본 연구의 결과는 원자로격납건물의 시공 단계에서 리스크 관리를 위한 기초 자료로 활용될 수 있을 것이다.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 1996년도 종합학술발표회논문집
• /
• pp.65-74
• /
• 1996

Risk analysis is time-consuming and expensive process〔1〕〔6〕. Automated risk analysis tools have been widely used in industry and government to support decision making process and reduce cost. However, difficulties in materializing impact of threats and fast-changing network environments make analysis process more complicated and less trusted since impacts are relative in network environments. HAWK system is developed to improve the accuracy of analysis result in network-oriented environment. It provides user-friendly environments and considers network environments as primary assets.

• Industrial Engineering and Management Systems
• /
• 제14권4호
• /
• pp.379-391
• /
• 2015

Several risk assessment techniques have been presented and investigated in previous research, focusing mainly on the failure mode and effect analysis (FMEA). FMEA can be employed to determine where failures can occur within industrial systems and to assess the impact of such failures. This research proposes a novel methodology for hazard analysis and risk assessments that integrates FMEA with the bow-tie model. The proposed method has been applied and evaluated in a real industrial process, illustrating the effectiveness of the proposed method. Specifically, the bowtie diagram of the critical equipment in the adopted plant in the case study was built. Safety critical barriers are identified and each of these is assigned to industrial process with an individual responsible. The detection rating to the failure mode and the values of risk priority number (RPN) are calculated. The analysis shows the high values of RPN are 500 and 490 in this process. A global corrective actions are suggested to improve the RPN measure. Further managerial insights have been provided.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.13-20
• /
• 2009

The risk assessment of thermal hazard to identify chemical or process hazard during early process developments have been considered. The early identification of thermal hazards associated with a process, such as rapid heats of reaction, exothermic decompositions, and the potential for thermal runaways before any large scale operations are undertaken. This paper presents to evaluate the safe operating parameters/envelope for exist plant operations. The assessment of thermal hazard with operating conditions such as amount of process materials, inhibitor, and catalyst on esterification process in manufacture of concrete mixture agents are described. The experiments were performed by a sort of calorimetry with the Multimax reactor system as a screening tool. The aim of the study was to evaluate the thermal risk of process material and mixture in terms of safety security to be practical applications in esterification process. It suggested that we should provide the thermal hazard of reaction materials to present safe operating conditions with cause of accident through this study.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.92-97
• /
• 2012

Risk management is the process that helps to identify hazards, analyze them, and then to create an action plan to avoid and mitigate these hazards. The main objective of risk management in product development and manufacturing is to provide safe and efficient products without spending too many resources. Medical device manufacturers also face enormous risks - regulatory, legal, and financial - based on their products and processes, and the concepts of risk management are particularly important because any single failure may result in serious damages to body or loss of life. In this regard, a set of guidelines for the application of risk management to medical devices has been issued by ISO and specified in the document ISO 14971 Medical devices - Application of risk management to medical devices. The main objective of this study is to investigate the application of risk management to dental implant development and manufacturing processes based on ISO 14971. A general risk management process is first introduced, and the application of ISO 14971 to dental implants is further investigated.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.189-196
• /
• 2012

Fire is one of the greatest threats to historical buildings not only to the building's occupants but also to the building's structure and contents. The purpose of this research is to evaluate fire risk in historical buildings in Korea through a series of survey and review. In this research, a multicriteria decision-making approach involving Analytical Hierarchy Process has been designed to determine a weighted index to identify factors and quantify fire risk. Fire risk ranking systems of historical building has been developed in some applications, for example, BOCA, WISCONSIN, FSES and HFRI. According to the such derived fire risk indexing, the Human Activity index showed the highest risk, followed by Historic Buildings, Fire Safety Systems, and then Natural Environmental Causes. Comparison of these factors indicates that the derived risk values differ from case to case. It is proposed that a performance-based design approach should consider the building & occupant characteristics, locations and historical significance, resulting in a more accurate and effective evaluation of fire risk.

• 한국건설관리학회논문집
• /
• 제1권1호
• /
• pp.53-62
• /
• 2000

본 연구는 건설 프로젝트의 초기 단계에서 미래에 발생할 수 있는 리스크를 리스크분할체계를 통하여 파악하고, 파악된 리스크를 효과적이고 체계적으로 분석 및 평가하여 프로젝트 초기단계에서 리스크를 분석하고 평가할 수 있는 절차와 계산틀을 제시하였다. 그에 따라, 프로젝트 기획 및 입찰 전 단계에서 건설공사 이행과정에서 발생할 가능성이 있는 리스크를 분석 및 평가하기 위해 FREES(Fuzzy Risk Evaluation Expert System)을 제안하였으며 가상 시나리오를 설정하여 모델에 대한 검증을 수행하였다. FREES는 기존의 IF-THEN 지식베이스를 사용한 전문가 시스템과 비교했을 경우 퍼지소속함수를 사용함으로써 규칙의 수를 현저하게 줄일 수 있으며 지식베이스의 구축과 변경 및 삭제 등이 용이하기 때문에 시간의 변화에 따라 다양하게 변화하는 리스크의 크기나 영향정도를 쉽게 반영할 수 있다.

• Journal of Dairy Science and Biotechnology
• /
• 제29권2호
• /
• pp.69-73
• /
• 2011

Food borne pathogens are a growing concern for human health and food safety throughout the world. Milk and dairy products are commonly associated with spoilage or contamination from a wide variety of physical, microbial, and chemical hazardous. Microbiological risk analysis consists of three components: risk assessment, risk management, and risk communication, and overall objective of this process is ultimately public health protection. The microbiological risk assessment is useful tool to evaluate food safety as it is based on a scientific approach. In addition risk assessment process includes quantitative estimation of the probability of occurrence of microbial hazards to evaluate more accurate human exposure. The aim of this study is to review the microbiological risk assessment on the prevalence of bacterial foodborne pathogens in milk and dairy products.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2047-2052
• /
• 2023

Risk-informed approach has been widely applied in the safety design, regulation, and operation of nuclear reactors. It has been commonly accepted that risk-informed design optimization should be used in the innovative reactor designs to make nuclear system highly safe and reliable. In spite of the risk-informed approach has been used in some advanced nuclear reactors designs, such as Westinghouse IRIS, Gen-IV sodium fast reactors and lead-based fast reactors, the process of risk-informed design of nuclear reactors is hardly to carry out when passive system reliability should be integrated in the framework. A practical method for new passive safety reactors based on probabilistic safety assessment (PSA) and passive system reliability analyze linking is proposed in this paper. New three-dimension frequency-consequence curve based on risk concept with three variables is used in this method. The proposed method has been applied to the determination optimization of design options selection in a 10 MWth lead-based research reactor(LR) to obtain one optimized system design in conceptual design stage, using the integrated reliability and probabilistic safety assessment program RiskA, and the computation resources and time consumption in this process was demonstrated reasonable and acceptable.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.72-79
• /
• 2015

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of water and most of raw materials in the plating process have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, the companies have to notice the changes immediately to prevent the risk of fire from plating process. Due to this reason, an agile and systematic temperature monitoring system is required for the plating companies. Unfortunately, in case of small size companies, it is hard to purchase a systematic solution and be offered consulting from one of the risk management consulting companies due to an expensive cost. In addition, most of the companies have insufficient research and development (R&D) experts to autonomously develop the risk management solution. In this article, we developed a real time remote temperature monitoring system which is easy to operate with a lower cost. The system is constructed by using Raspberry Pi single board computer and Android application to release an economic issue for the small sized plating manufacturing companies. The derived system is able to monitor the temperature continuously with tracking the temperature in the batch in a short time and transmit a push-alarm to a target-device located in a remoted area when the temperature exceeds a certain hazardous-temperature level. Therefore, the target small plating company achieves a risk management system with a small cost.