• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.331-342
• /
• 2016

Objective: To evaluate the accuracy and reliability of the diagnostic tools available for assessing maxillary transverse deficiencies. Methods: An electronic search of three databases was performed from their date of establishment to April 2015, with manual searching of reference lists of relevant articles. Articles were considered for inclusion if they reported the accuracy or reliability of a diagnostic method or evaluation technique for maxillary transverse dimensions in mixed or permanent dentitions. Risk of bias was assessed in the included articles, using the Quality Assessment of Diagnostic Accuracy Studies tool-2. Results: Nine articles were selected. The studies were heterogeneous, with moderate to low methodological quality, and all had a high risk of bias. Four suggested that the use of arch width prediction indices with dental cast measurements is unreliable for use in diagnosis. Frontal cephalograms derived from cone-beam computed tomography (CBCT) images were reportedly more reliable for assessing intermaxillary transverse discrepancies than posteroanterior cephalograms. Two studies proposed new three-dimensional transverse analyses with CBCT images that were reportedly reliable, but have not been validated for clinical sensitivity or specificity. No studies reported sensitivity, specificity, positive or negative predictive values or likelihood ratios, or ROC curves of the methods for the diagnosis of transverse deficiencies. Conclusions: Current evidence does not enable solid conclusions to be drawn, owing to a lack of reliable high quality diagnostic studies evaluating maxillary transverse deficiencies. CBCT images are reportedly more reliable for diagnosis, but further validation is required to confirm CBCT's accuracy and diagnostic superiority.

• Earthquakes and Structures
• /
• v.17 no.5
• /
• pp.511-519
• /
• 2019

The concrete gravity dam is one of the most important parts of the nation's infrastructure. Besides the benefits, the dam also has some potentially catastrophic disasters related to the life of citizens directly. During the lifetime of service, some degradations in a dam may occur as consequences of operating conditions, environmental aspects and deterioration in materials from natural causes, especially from dynamic loads. Cumulative Absolute Velocity (CAV) plays a key role to assess the operational condition of a structure under seismic hazard. In previous researches, CAV is normally used in Nuclear Power Plant (NPP) fields, but there are no particular criteria or studies that have been made on dam structure. This paper presents a method to calculate the limitation of CAV for the Bohyeonsan Dam in Korea, where the critical Peak Ground Acceleration (PGA) is estimated from twelve sets of selected earthquakes based on High Confidence of Low Probability of Failure (HCLPF). HCLPF point denotes 5% damage probability with 95% confidence level in the fragility curve, and the corresponding PGA expresses the crucial acceleration of this dam. For determining the status of the dam, a 2D finite element model is simulated by ABAQUS. At first, the dam's parameters are optimized by the Minitab tool using the method of Central Composite Design (CCD) for increasing model reliability. Then the Response Surface Methodology (RSM) is used for updating the model and the optimization is implemented from the selected model parameters. Finally, the recorded response of the concrete gravity dam is compared against the results obtained from solving the numerical model for identifying the physical condition of the structure.

• Structural Monitoring and Maintenance
• /
• v.2 no.3
• /
• pp.283-300
• /
• 2015

Visual condition inspections remain paramount to assessing the current deterioration status of a bridge and assigning remediation or maintenance tasks so as to ensure the ongoing serviceability of the structure. However, in recent years, there has been an increasing backlog of maintenance activities. Existing research reveals that this is attributable to the labour-intensive, subjective and disruptive nature of the current bridge inspection method. Current processes ultimately require lane closures, traffic guidance schemes and inspection equipment. This not only increases the whole-of-life costs of the bridge, but also increases the risk to the travelling public as issues affecting the structural integrity may go unaddressed. As a tool for bridge condition inspections, Unmanned Aerial Vehicles (UAVs) or, drones, offer considerable potential, allowing a bridge to be visually assessed without the need for inspectors to walk across the deck or utilise under-bridge inspection units. With current inspection processes placing additional strain on the existing bridge maintenance resources, the technology has the potential to significantly reduce the overall inspection costs and disruption caused to the travelling public. In addition to this, the use of automated aerial image capture enables engineers to better understand a situation through the 3D spatial context offered by UAV systems. However, the use of UAV for bridge inspection involves a number of critical issues to be resolved, including stability and accuracy of control, and safety to people. SLAM (Simultaneous Localisation and Mapping) is a technique that could be used by a UAV to build a map of the bridge underneath, while simultaneously determining its location on the constructed map. While there are considerable economic and risk-related benefits created through introducing entirely new ways of inspecting bridges and visualising information, there also remain hindrances to the wider deployment of UAVs. This study is to provide a context for use of UAVs for conducting visual bridge inspections, in addition to addressing the obstacles that are required to be overcome in order for the technology to be integrated into current practice.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2020

Purpose : The purpose of this meta-analysis was to examine the effects of microcurrent on inflammatory musculoskeletal diseases. Methods : Domestic databases (RISS, NDSL, KISS, DBpia, and Kmbase) were searched for studies that conducted clinical trials associated with microcurrent and its impact on inflammatory musculoskeletal diseases. A total of 606 studies published between 2002 and 2019 were identified, with 8 studies satisfying the inclusion data. The studies were classified according to patient, intervention, comparison, and outcome (PICO). The search outcomes were items associated with blood component, pain, and function. The 8 studies that were included in the study were evaluated using R meta-analysis (version 4.0). The quality of 7 randomized control trials was evaluated using Cochrane risk of bias (ROB). The quality of 1 non-randomized control trial was evaluated using risk of bias assessment tool for non-randomized studies (RoBANS). Effect sizes were computed as the corrected standard mean difference (SMD). A random-effect model was used to analyze the effect size because of the high heterogeneity among the studies. Egger's regression test was carried out to analyze the publishing bias. Results : The following factors had a large effect size involving microcurrent on inflammatory musculoskeletal diseases: blood component (Hedges's g=-2.46, 95 % CI=-4.20~-0.73), pain (Hedges's g=3.51, 95 % CI=2.44~4.77), and function (Hedges's g=3.06, 95 % CI: 1.53~4.58). Except for function (t=1.572, p=.191), Egger's regression test showed that the publishing bias had statistically significant differences. Conclusion : This study provides evidence for the effectiveness of microcurrent on inflammatory musculoskeletal diseases in terms of blood component, pain, and function. However, due to the small sample sizes used in the included studies, the results of our study should be interpreted cautiously, especially considering the publishing bias.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.133-140
• /
• 2022

Purpose: The aim of this review was to systematically analyze the available literature on the correlation between the gray values (GVs) of cone-beam computed tomography (CBCT) and the Hounsfield units (HUs) of computed tomography (CT) for assessing bone mineral density. Materials and Methods: A literature search was carried out in PubMed, Cochrane Library, Google Scholar, Scopus, and LILACS for studies published through September 2021. In vitro, in vivo, and animal studies that analyzed the correlations GVs of CBCT and HUs of CT were included in this review. The review was prepared according to the PRISMA checklist for systematic reviews, and the risk of bias was assessed using the Quality Assessment of Diagnostic Accuracy Studies tool. A quantitative analysis was performed using a fixed-effects model. Results: The literature search identified a total of 5,955 studies, of which 14 studies were included for the qualitative analysis and 2 studies for the quantitative analysis. A positive correlation was observed between the GVs of CBCT and HUs of CT. Out of the 14 studies, 100% had low risks of bias for the domains of patient selection, index test, and reference standards, while 95% of studies had a low risk of bias for the domain of flow and timing. The fixed-effects meta-analysis performed for Pearson correlation coefficients between CBCT and CT showed a moderate positive correlation (r=0.669; 95% CI, 0.388 to 0.836; P<0.05). Conclusion: The available evidence showed a positive correlation between the GVs of CBCT and HUs of CT.

• The Journal of Korean Medicine
• /
• v.42 no.2
• /
• pp.90-97
• /
• 2021

Bone mineral density (BMD) is a major diagnostic marker for bone health. A 44-year-old male had BMD of 0.81 g/cm² (Z-score: -3.1) in lumbar spine scan and 0.54 g/cm² (Z-score: -2.7) for femoral neck from regular medical checkup in Apr 2020. He had no other specific medical conditions except hyperlipidemia and alcohol was a single risk factor for fracture according to Fracture Risk Assessment Tool. After he was diagnosed with liver-kidney deficiency and treated for 20 weeks with Jeopgol-tang originally patented for promoting fracture recovery, lumbar spine BMD increased by 13.6 % (0.92 g/cm², Z-score: -2.1) and femoral neck BMD by 22.2% (0.66 g/cm², Z-score: -1.8) compared with those of Mar 2020. Herbal medicine treatment for tonifying liver and kidney to improve BMD warrants further investigation.

• Women's Health Nursing
• /
• v.28 no.2
• /
• pp.87-99
• /
• 2022

Purpose: The purpose of this systematic review was to examine aromatherapy interventions for prenatal and postnatal women, and to determine the effectiveness of these interventions on fatigue. Methods: Six national and international databases were reviewed to retrieve and collect studies published up to September 7, 2021, describing randomized controlled trials and controlled clinical trials of aromatherapy interventions for prenatal and postnatal women's fatigue. Of the 323 articles initially identified, 64 duplicates were excluded and 259 were screened. After further excluding 216 articles not related to PICO framework, 10 were selected for review. Two reviewers independently selected studies and conducted data extraction and quality appraisal using Cochran's Risk of Bias and Risk of Bias Assessment Tool for Non-randomized Studies. Results: The quality of the 10 selected studies was overall satisfactory. A meta-analysis of three studies showed that aromatherapy with lavender oil produced a 0.75-point reduction in postnatal mothers' fatigue when compared to control groups. Sleep quality was also analyzed as a secondary outcome of fatigue. A meta-analysis of four studies using lavender and/or orange peel oil found that aromatherapy produced a 0.98-point improvement in postnatal mothers' quality of sleep. Although a meta-analysis could not be conducted to synthesize the findings for fatigue in pregnant women, inhalation and massage therapy using lavender oil showed positive effects on prenatal fatigue and sleep quality. Conclusion: Aromatherapy using lavender oil and orange peel oil is effective in improving prenatal and postnatal fatigue and sleep quality.

• Nutrition Research and Practice
• /
• v.17 no.2
• /
• pp.175-191
• /
• 2023

BACKGROUND/OBJECTIVES: The scientific evidence of a sodium-obesity association is limited by sodium intake assessments. Our specific aim is to synthesize the association between dietary sodium intake and obesity across the sodium intake assessments as evidenced by systematic reviews in adults. SUBJECTS/METHODS: A systematic search identified systematic reviews comparing the association of dietary sodium intakes with obesity-related outcomes such as body mass index (BMI), body weight, waist circumference, and risk of (abdominal) obesity. We searched PubMed on October 24, 2022. To assess the Risk of Bias in Systematic Reviews (ROBIS), we employed the ROBIS tool. RESULTS: This review included 3 systematic reviews, consisting of 39 unique observational studies (35 cross-sectional studies and 4 longitudinal studies) and 15 randomized controlled trials (RCTs). We found consistently positive associations between dietary sodium intake and obesity-related outcomes in cross-sectional studies. Studies that used 24-h urine collection indicated a greater BMI for those with higher sodium intake (mean difference = 2.27 kg/m²; 95% confidence interval [CI], 1.59-2.51; P < 0.001; I² = 77%) compared to studies that used spot urine (mean difference = 1.34 kg/m²; 95% CI, 1.13-1.55; P < 0.001; I² = 95%) and dietary methods (mean difference = 0.85 kg/m²; 95% CI, 0.1-1.51; P < 0.05; I² = 95%). CONCLUSIONS: Quantitative synthesis of the systematic reviews has shown that cross-sectional associations between dietary sodium intake and obesity outcomes were substantially different across the sodium intake assessments. We need more high-quality prospective cohort studies and RCTs using 24-h urine collection to examine the causal effects of sodium intake on obesity.

• Restorative Dentistry and Endodontics
• /
• v.46 no.3
• /
• pp.41.1-41.23
• /
• 2021

Objectives: This study aimed to evaluate the efficacy of various local anesthesia (LA) in vital asymptomatic teeth. Materials and Methods: Randomized controlled trials comparing pulpal anesthesia of various LA on vital asymptomatic teeth were included in this review. Searches were conducted in the Cochrane CENTRAL, MEDLINE (via PubMed), EMBASE, ClinicalTrials.gov, Google Scholar and 3 field-specific journals from inception to May 3, 2019. Study selection, data extraction, and risk of bias assessment using Cochrane Risk of Bias Tool were done by 2 independent reviewers in duplicate. Network meta-analysis (NMA) was performed within the frequentist setting using STATA 15.0. The LA was ranked, and the surface under the cumulative ranking (SUCRA) line was plotted. The confidence of the NMA estimates was assessed using the CINeMA web application. Results: The literature search yielded 1,678 potentially eligible reports, but only 42 were included in this review. For maxillary buccal infiltration, articaine 4% with epinephrine 1:100,000 was more efficacious than lidocaine 2% with epinephrine 1:100,000 (odds ratio, 2.11; 95% confidence interval, 1.14-3.89). For mandibular buccal infiltration, articaine 4% with epinephrine 1:100,000 was more efficacious than various lidocaine solutions. The SUCRA ranking was highest for articaine 4% with epinephrine when used as maxillary and mandibular buccal infiltrations, and lidocaine 2% with epinephrine 1:80,000 when used as inferior alveolar nerve block. Inconsistency and imprecision were detected in some of the NMA estimates. Conclusions: Articaine 4% with epinephrine is superior when maxillary or mandibular infiltration is required in vital asymptomatic teeth.

• Restorative Dentistry and Endodontics
• /
• v.48 no.4
• /
• pp.37.1-37.17
• /
• 2023

This study aimed to compare the disinfectant ability of chlorhexidine (CHX) gel and sodium hypochlorite (NaOCl). Systematic searches were conducted from inception until December 8th, 2022 (MEDLINE/PubMed, Cochrane Library, Web of Science, Scopus, Embase, and Grey Literature databases). Only randomized clinical trials were included. The revised Cochrane risk of bias tools for randomized trials were used to assess the quality of studies. Meta-analyses were performed. The overall quality of evidence was assessed through the Grading of Recommendations Assessment, Development, and Evaluation tool. Six studies were included. Five had a low risk of bias and 1 had some concerns. Three studies assessed bacterial reduction. Two were included in the meta-analysis for bacterial reduction (mean difference, 75.03 [confidence interval, CI, -271.15, 421.22], p = 0.67; I² = 74%); and 3 in the meta-analysis for cultivable bacteria after chemomechanical preparation (odds ratio, 1.03 [CI, 0.20, 5.31], P = 0.98; I² = 49%). Five studies assessed endotoxin reduction. Three were included in a meta-analysis (mean difference, 20.59 [CI, -36.41, 77.59], p = 0.48; I² = 74%). There seems to be no difference in the disinfectant ability of CHX gel and NaOCl, but further research is necessary.