• 한국ITS학회 논문지
• /
• 제11권2호
• /
• pp.67-76
• /
• 2012

본 연구에서는 본 학회지(제9권, 제5호 (2010년 10월))에서 발표한 교통약자보호시스템이 설치되어 있는 지역에 대한 어린이 지킴이 서비스 만족도 평가기준을 단순한 보호자 만족도 평가에서 벗어나 객관적인 구축평가 기준으로 정립하였다. 또한, 인식장치를 신규배치하기 위한 지역에 대해서는 사전 예측평가를 실시하여 인식장치 적정배치에 판단근거로 삼아 효율적 예산집행이 가능하도록 하였다. 시스템 구축평가에서는 가장 기본이 되는 최대 안심 거리는 72.2m로 나타났다. 이를 토대로 위험도개념을 도입하여 심리적위험도와 사고위험도를 종합한 위험도 순위에 따라 인식장치를 인식장치 배기거리에 맞게 배치하는 방식으로 향후 사업이 진행될 수 있도록 평가기준을 제시하였다. 평가기준에 의거 사례지역에 대한 종합위험도 평가결과 시범사업 후 종합위험도가 35.2% 감소한 것으로 평가되었다. 또한, 예산 규모 내에서 인식장치를 배치기준에 의해 설치할 경우 전체적으로 위험도가 33.1% 낮아져 예산규모는 당초 시범사업보다 21.9% 적게 투입하고도 종합위험도는 당초 시범사업의 94% 수준까지 낮출 수 있어 본 연구에서 정립한 위험도에 따른 인식장치 배치방법이 종합위험도 감소와 예산절감에 향후 효과적으로 적용될 수 있음을 알 수 있었다.

• Environmental Analysis Health and Toxicology
• /
• 제10권1_2호
• /
• pp.1-14
• /
• 1995

The purpose of this research is to assess the health risk of pollutants in drinking water and recommend the guidelines and management plans for maintaining good quality of drinking water. This study has been funded as a national project for three years from 1992 to 1995. This study(the second year, 1993-1994) was conducted to monitor 32 species of carcinogenic chemicals such as volatile organic compounds(VOCs), polynuclear aromatic hydrocarbons(PAHs), pesticides and heavy metals of drinking water at some area in six cities of Korea, and evaluate health risk due to these chemicals through four main steps of risk assessment in drinking water. In hazard identification, 32 species of carcinogenic chemicals were identified by the US EPA classification system. In the step of exposure assessment, sampling of raw, treated and tap water from the public water supply system had been conducted from 1993 to 1994, and 32 chemicals were analyzed. In dose-response assessment, cancer potencies, unit risk estimates and virtually safe doses of carcinogens were obtained by TOX-RISK (Version 3.1). In risk characterization of detected chemicals, health risk due to carcinogens such as vinyl chloride, carbon tetrachloride, dichloromethane, 1, 2-dichloromethane, chloroform, benzene and arsenic of tap water in several cities exceeded 10$^{-5}$ level. We suggest that non-regulated chemicals which exceed 10$^{-5}$ excess cancer risk level, such as vinyl chloride, carbon tetrachloride and 1, 2-dichloroethane, should be monitored periodically and be regulated by the Drinking Water Management Act, and database for exposure parameter of our own situation should be established.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.204-205
• /
• 2015

Exterior insulation board in cast-in-place concrete form system could reduce construction period and improve quality in apartment construction. However, the method is progressed with insulation and concrete frame works at the same time, then risk is increased in duration control and quality management. Therefore, this paper analyzed risk factors through FMEA method. We found that the key risk factors delaying schedule was insulation material that soaked in the rain and quality defects on the insulation material joint. Based on this research, the risk management approach should be developed for improvement of method activation.

• 기본간호학회지
• /
• 제19권4호
• /
• pp.444-452
• /
• 2012

Purpose: To explore the usefulness of previous fall history as a triage variable for inpatients. Methods: Medical records of 21,382 patients, admitted to medical units of one tertiary hospital, were analyzed retrospectively. Inpatient falls were identified from the hospital's self-report system. Non-falls in 1,125 patients were selected by a stratified matching sampling with 125 patients with falls (0.59%). A comparative and predictive accuracy analysis was conducted to describe differences between the two groups with and without a history of falls. Logistic regression was used to measure the effect size of the fall history. Results: The fall history group showed higher prevalence by 9 fold than the non-fall history group. The relationships between falls and relevant variables which were significant in the non-fall history group, were not significant for the fall history group. Falls in the fall history group were 25 times more likely than in the non-fall group. Predictive accuracy of the risk assessment tool showed almost zero specificity in the fall history group. Conclusion: The presence of fall history, the fall prevalence, variables relevant to falls, and the accuracy of the risk tool were different, which support the usefulness of the fall history as a triage variable.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.11-26
• /
• 2014

The analyses carried out within the Seismic Probabilistic Risk Assessments (SPRAs) of Nuclear Power Plants (NPPs) are affected by significant aleatory and epistemic uncertainties. These uncertainties have to be represented and quantified coherently with the data, information and knowledge available, to provide reasonable assurance that related decisions can be taken robustly and with confidence. The amount of data, information and knowledge available for seismic risk assessment is typically limited, so that the analysis must strongly rely on expert judgments. In this paper, a Dempster-Shafer Theory (DST) framework for handling uncertainties in NPP SPRAs is proposed and applied to an example case study. The main contributions of this paper are two: (i) applying the complete DST framework to SPRA models, showing how to build the Dempster-Shafer structures of the uncertainty parameters based on industry generic data, and (ii) embedding Bayesian updating based on plant specific data into the framework. The results of the application to a case study show that the approach is feasible and effective in (i) describing and jointly propagating aleatory and epistemic uncertainties in SPRA models and (ii) providing 'conservative' bounds on the safety quantities of interest (i.e. Core Damage Frequency, CDF) that reflect the (limited) state of knowledge of the experts about the system of interest.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2006년도 Perspectives of Evironmental Health Issues in Asia-Pacific Region
• /
• pp.15-30
• /
• 2006

o US environmental regulations are complex o Compliance assesment should be part of an effective environmental management system o Companies must assess and report a dollar value for environmental liabilities o Comprehensive assessment of environmental liability and risk should be conducted for all property transfers aquisitions o Independent external audits provide the highest level of compliance oversight and can assist in assessment of environmental liabilities

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.76-87
• /
• 2010

According to the new rules and regulations (New SOLAS), major safety critical systems are to be designed to be redundant, which is called 'Redundancy Design'. This paper was to quantitatively analyze the degree of influence of the redundancy design applied to major safety critical systems using IMO's FSA(formal Safety Assessment) method. For the purpose of this study, the diesel engine system, which is actually one of major safety critical systems, was dealt with FMEA, FTA and ETA technique. In addition, whether the redundancy was met or not was verified and the degree of safety, or redundancy, was represented in terms of reliability. In conclusion, the safety of propulsion systems is possibly assessed systematically by estimating the risk level in terms of frequency and fatality.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.64-72
• /
• 2013

Construction machinery has been utilized to carry out construction works effectively. Using construction machinery enables a builder to reduce the time and the cost needed for the construction, but the fatal accident caused by it has been increased. This study is intended to identify risk magnitude of accident by kind of construction machinery through interviews with experts. Construction machineries surveyed in this research are excavator, tower crane, lift, mobile crane and forklift, those are the machinery which accident occurs more often than the other machinery. To evaluate the risk of the accidents identified, risk category was determined according to the US DOD system safety program (MIL-STD-882B) considering the risk degree and intensity. As a result, accident occurred in the process of material transport & handling was found to be the most dangerous. On the other hand, the accidents caused by the defective machinery and the poor safety gear were considered to be less dangerous relatively. The risk category by type of construction machinery suggested in this study is expected to provide the basic data in developing the safety guidance for construction project.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.471-482
• /
• 2012

To assess the risk of nuclear power plant operation and to determine the risk impact of digital systems, there is a need to quantitatively assess the reliability of the digital systems in a justifiable manner. The Probabilistic Risk Analysis (PRA) is a tool which can reveal shortcomings of the NPP design in general and PRA analysts have not had sufficient guiding principles in modelling particular digital components malfunctions. Currently digital I&C systems are mostly analyzed simply and conventionally in PRA, based on failure mode and effects analysis and fault tree modelling. More dynamic approaches are still in the trial stage and can be difficult to apply in full scale PRA-models. As basic events CPU failures, application software failures and common cause failures (CCF) between identical components are modelled.The primary goal is to model dependencies. However, it is not clear which failure modes or system parts CCF:s should be postulated for. A clear distinction can be made between the treatment of protection and control systems. There is a general consensus that protection systems shall be included in PRA, while control systems can be treated in a limited manner. OECD/NEA CSNI Working Group on Risk Assessment (WGRisk) has set up a task group, called DIGREL, to develop taxonomy of failure modes of digital components for the purposes of PRA. The taxonomy is aimed to be the basis of future modelling and quantification efforts. It will also help to define a structure for data collection and to review PRA studies.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.117-122
• /
• 2022

This paper proposes a method for evaluating the work of manufacturing workers using MediaPipe as a risk factor for musculoskeletal diseases. Recently, musculoskeletal disorders (MSDs) caused by repeated working attitudes in industrial sites have emerged as one of the biggest problems in the industrial health field while increasing public interest. The Korea Occupational Safety and Health Agency presents tools such as NIOSH Lifting Equations (NIOSH), OWAS (Ovako Working-posture Analysis System), Rapid Upper Limb Assessment (RULA), and Rapid Entertainment Assessment (REBA) as ways to quantitatively calculate the risk of musculoskeletal diseases that can occur due to workers' repeated working attitudes. To compensate for these shortcomings, the system proposed in this study obtains the position of the joint by estimating the posture of the worker using the posture estimation learning model of MediaPipe. The position of the joint is calculated using inverse kinetics to obtain an angle and substitute it into the REBA equation to calculate the load level of the working posture. The calculated result was compared to the expert's image-based REBA evaluation result, and if there was a result with a large error, feedback was conducted with the expert again.