• 한국공간구조학회논문집
• /
• 제12권3호
• /
• pp.71-78
• /
• 2012

공간구조물은 높이-경간비 또는 개각과 같은 아치의 형상비에 따라 상이한 동적거동특성을 나타내며, 이러한 공간구조물은 지진의 영향을 직접적으로 받는 하부구조의 강성 및 그 접합부에 따라 상이한 지진응답특성을 나타낸다. 따라서 본 연구에서는 수직진동모드와 수평진동모드의 영향이 다른 단층아치구조에 하부기둥의 강성과 접합부에 따른 지진응답특성을 분석하고자 한다. 하부기둥의 영향으로 단층아치구조는 수직방향 응답이 더 많은 영향을 받으며, 기둥의 접합부 회전강성에 있어서는 활절을 제외하고는 큰 영향이 없는 것으로 나타난다.

• Wind and Structures
• /
• 제19권6호
• /
• pp.649-663
• /
• 2014

The present paper discusses the characteristics of unsteady aerodynamic forces on long-span curved roofs. A forced vibration test is carried out in a wind tunnel to investigate the effects of wind speed, vibration amplitude, reduced frequency of vibration and rise/span ratio of the roof on the unsteady aerodynamic forces. Because the range of parameters tested in the wind tunnel experiment is limited, a CFD simulation is also made for evaluating the characteristics of unsteady aerodynamic forces on the vibrating roof over a wider range of parameters. Special attention is paid to the effect of reduced frequency of vibration. Based on the results of the wind tunnel experiment and CFD simulation, the influence of the unsteady aerodynamic forces on the dynamic response of a full-scale long-span curved roof is investigated on the basis of the spectral analysis.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.117-124
• /
• 2001

In Single-layer latticed domes with rectangular network which is composed of ring of circumferential direction and rafter of longitudinal direction, that is, rib domes, if we use the cross-membered junction's method for the advantage in fabrication and construction, the eccentricity is occurred in the nodal point of crossing members. This paper is aimed at investigating the buckling characteristics for the effect of eccentricity according to rise-span ratios and distance of eccentricity. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. The maximum decreasing ratio of buckling strength due to the junction's eccentricity is about 60% in models of this paper. 2. In the increasing ratio of buckling strength for rise-span ratio, that of Type 3 models is larger than that of type 2 models. On the other hand, that of Type 2 mode is larger than that of Type 3 for eccentricity-distance. 3. In the viewpoint of the value of buckling strength, that of Type 2 models is larger than that of type 3 models. The effect of the junction's rigidity on buckling strength is not great for overall models. Therefore if we use the cross-membered junction's method for the advantage in fabrication and construction, the method of Type 2 will have the great advantage of that of Type 3.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.89-96
• /
• 2001

In this study non-linear finite element analysis of dynamic response of steel arch under partially distributed dynamic load was discussed. Material and geometric non-linearities were included in finite element formulation and steel behavior was modeled with Von Mises yield criteria. Either radial or vertical dynamic load was dealt in numerical examples. Normal arch and arch with maximum shape imperfection of L/11,000 were studied. The analysis results showed that maximum displacement at the center of arch was occurred when 70% of arch span was loaded. The maximum displacement at a quarter of arch span was occurred when 50% of arch span was loaded and the displacement was larger than that of center of arch. Ratio of arch rise to arch span within 0.2∼-.3 seems to be appropriate for arch under radial or vertical load.

• 한국공간구조학회논문집
• /
• 제18권1호
• /
• pp.55-65
• /
• 2018

In order to reduce the seismic response of the spatial structure, a seismic isolation system with sufficient flexibility is used. The natural period of structure with seismic isolation system got be long to avoid prominent period. In this study, The seismic response of the truss-arch structure, which is modeled in three types according to the rise-span ratio is analyzed on El-centro, Northridge and Artificial Earthquake and compared with the seismic response of the truss-arch structure with lead rubber bearing(LRB). When seismic load is applied to the truss arch with isolation system, the horizontal acceleration response of the truss arch is reduced and vertical seismic response is also reduced. The application of the seismic isolation system is effective in controlling the seismic response.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.389-402
• /
• 2014

본 연구에서는 기존 연구자들이 제안한 석조형식의 아치시스템에서 보강된 이음부와 뒤채움이 고려된 아치교량의 실물모형에 대한 재하실험을 수행하였다. 실물모형교량의 실험체는 10 m (경간) ${\times}$ 3 m (높이)과 10 m (경간) ${\times}$2 m(높이)이며, 실험체 폭은 2 m로 동일하게 하였다. 예비해석결과로부터 구조적으로 가장 취약한 하중위치는 경간의 1/3로 나타났고 그 결과를 토대로 구조실험시 하중재하위치, 측정 항목 및 위치를 결정하였다. 실험결과, 최대 내력은 높이/경간 비가 상대적으로 작은 실험체 $10m{\times}2m$가 실험체 $10m{\times}3m$보다 크게 나타났다. 실험체 모두 설계하중에 대하여 충분한 구조적 성능을 확보하는 것으로 평가되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.995-999
• /
• 2001

This paper deals with the free vibrations of arches with general boundary condition. Based on the dynamic equilibrium equations of a arch element acting the stress resultants and the inertia forces, the governing differential equation is derived for the in-plane free vibration of such arches. Differential equations are solved numerically to calculate natural frequencies. In numerical examples, the parabolic arch is considered. The effects of the arch rise to span length ratio, the slenderness ratio, the vertical spring coefficient and the rotational spring coefficient on the natural frequencies are analyzed.

• Structural Engineering and Mechanics
• /
• 제13권6호
• /
• pp.713-730
• /
• 2002

This paper presents a finite element approach for determining the natural frequencies for planar inclined arches of various shapes vibrating in three-dimensional space. The profile of inclined arches, represented by undeformed centriodal axis of cross-section, is defined by the equation of plane curves expressed in the rectangular coordinates which are : circular, parabolic, sine, elliptic, and catenary shapes. In free vibration state, the arch is slightly displaced from its undeformed position. The linear relationship between curvature-torsion and axial strain is expressed in terms of the displacements in three-dimensional space. The finite element discretization along the span length is used rather than the total are length. Numerical results for arches of various shapes are given and they are in good agreement with those reported in literature. The natural frequency parameters and mode shapes are reported as functions of two nondimensional parameters: the span to cord length ratio (e) and the rise to cord length ratio (f).

• 한국농공학회논문집
• /
• 제46권6호
• /
• pp.21-28
• /
• 2004

This study aims to investigate the effects of partially distributed loads on the dynamic behaviour of steel parabolic arches by using the elasto-plastic finite element model based on the Von Mises yield criteria and the Prandtl-Reuss How rule. For this purpose, the vertical and the radial load conditions were considered as a distributed loading and the loading range is varied from 40% to 100% of arch span. Normal arch and arch with initial deflection were studied. The initial deflection of arch was assumed by the sinusoidal motile of ${\omega}_i\;=\;{\\omega}_O$ sin ($n{\pi}x/L$). Several numerical examples were tested considering symmetric initial deflection when the maximum initial deflection at the apex is fixed as L/1000. The analysis resluts showed that the maximum deflection at the apex of arch was occurred when 70% of arch span was loaded. The maximum deflection at the quarter point of arch span was occurred when 50% of arch span was loaded. It is known that the optimal rise to span ratio between 0.2 and 0.3 when the vertical or radial distributed load is applied. It is verified that the influence of initial deflection of radial load case is more serious than that of vertical load case.

• 한국강구조학회 논문집
• /
• 제24권3호
• /
• pp.337-348
• /
• 2012

본 연구는 초기조건에 민감한 공간 트러스를 대상으로 불완전성으로 인한 분기거동 및 불안정 특성에 대해서 연구하였으며, 접선강성행렬의 행렬식과 고유치해석으로 임계점과 좌굴하중을 구하였다. 고유모드의 민감성에 의한 불안정 현상을 고찰하기 위해서 2-자유절점공간 트러스와 스타 돔 및 3링 돔 모델을 예제로 채택하였으며, 라이즈-스팬 비 및 하중 파라메타에 따른 좌굴하중의 영향을 분석하였다. 2-자유절점 모델의 초기 형상불완전성에 따른 민감성은 고유모드에 따라 임계 후 평형경로가 바뀌었으며, 좌굴하중은 불완전 량의 증가에 따라 감소하는 결과를 얻었다. 예제에서 나타난 두 가지 민감한 좌굴패턴은 자유절점의 변위 위치를 살펴봄으로서 설명할 수 있었고, 형상 불완전성에 따른 거동은 비대칭 고유모드가 가장 큰 영향을 주었다. 민감한 고유모드는 단순화한 모델의 비신장 메커니즘 기저와 유사하였다. 스타 돔 모델은 라이즈-스팬 비가 높을수록 전체좌굴보다는 국부좌굴이 우세하며, 하중 파라메타 값이 클수록 평형경로 상에 분기점이 발생하였다. 또한 스타돔과 3링 모델의 좌굴하중은 각각 극한점 하중레벨의 약 50-70% 및 80-90%로 나타났다.