• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.412-417
• /
• 1998

This paper suggests the drive characteristics of a Switched Reluctance Motor(SRM) by 2-phase excitation method. T This scheme excites 2 phases simultaneously, which is similar to 2-phase excitation method of a step motor. In this s scheme. the torque is produced by mutual inductances as well as self inductances. The abrupt change of a phase e excitation produces mechanical stresses and it results in vibration and noise. The acoustic noise is reduced remarkably t through the sequential phase excitation in the 2-phase excitation. Operational principle and characteristic comp없1son t to that of the conventional SRM show that this excitation scheme has some advantages including torque ripple and n noise reduction.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.923-930
• /
• 2018

Based on the application of an integrated dynamic brake (IDB) system that uses a PWM inverter fed-AC motor drive to operate the piston, a new active zero state PWM (AZSPWM) is proposed to improve the stability and reliability of the IDB system by suppressing the conducted electro-magnetic interference (EMI) noise under a wide range of load torque. The new AZSPWM reduces common-mode voltage (CMV) by one-third when compared to that of the conventional space vector PWM (CSVPWM). Although this method slightly increases the output current ripple by reducing the CMV, like the CSVPWM, it can be used within the full range of the load torque. Further, unlike other reduced common-mode voltage (RCMV) PWMs, it does not increase the switching power loss. A theoretical analysis is presented and experiments are performed to demonstrate the effectiveness of this method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.11
• /
• pp.575-582
• /
• 2001

This paper presents a calculating method of switching angle for adaptive switched reluctance motor (SRM) drive of a drill. The operation of the SRM is completely characterized by the flux linked by one phase winding which depends only on the current in that same phase winding and the rotor position. An efficiently adaptive SRM drive is possible on appropriately scheduling the commutation angles with accurate rotor position, supplied current value and speed information. An adaptive SRM drive with reduction torque ripple should be controlled by an optimized phase current control along with rotor position. Therefore, we are suggested a computing method of switching turn-on and off angles for adaptationally SRM operation with varied rotor speed and load. To probe the computing method, we have some simulation and experiment, it is shown a good result that can be computing the optimized switching angles for an electric drill motor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.522-527
• /
• 2012

This paper presents a result of the mechanical noise and vibration analysis as well as the electrical characteristics analysis of the permanent magnet (PM) motor according to the driving method that is Brushless DC (BLDC) drive and Brushless AC (BLAC) drive. To do that, the characteristics of the PM motor, which have the same output power but different driving method, are investigated. At that time, the characteristics such as torque, torque ripple and flux density, and so on, are obtained by finite element analysis (FEA). Besides, noise and vibration are obtained by spectrum analysis. The magnetic noise is defined as noise generated from vibrations due to electromagnetic excitation force. In this paper, the electromagnetic excitation force is analyzed and design process of noise reduction is proposed. Finally, The validity of the analysis results is verified by test.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.108-113
• /
• 2009

FIR upsampling circuit generates output data L times faster than input data. For efficient implementation of upsampler, FT filter stages Noble identity theory. In this paper, we propose a method that one of the divided filter stages is removed by making Phase delay to integer number. 192taps 2-times upsampler used in CDtoDAT is designed using proposed method. The designed circuit is synthesized using Hynix 0.18um process. By the simulation results, it is shown that the proposed method leads to up to 48%, 43% and 99.9% and 68% reduction in area, power consumption and maximum phase delay error and maximum ripple error compared with conventional method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.11
• /
• pp.68-76
• /
• 2014

This paper presents an offset error compensation algorithm for the accurate phase angle of the grid voltage in single-phase grid-connected inverters. The offset error generated from the grid voltage measurement process cause the fundamental harmonic component with grid frequency in the synchronous reference frame phase lock loop (PLL). As a result, the grid angle is distorted and the power quality in power systems is degraded. In addition, the dq-axis currents in the synchronous reference frame and phase current have the dc component, first and second order ripples compared with the grid frequency under the distorted grid angle. In this paper, the effects of the offset and scaling errors are analyzed based on the synchronous reference frame PLL. Particularly, the offset error can be estimated from the integrator output of the synchronous reference frame PLL and compensated by using proportional-integral controller. Moreover, the RMS (Root Mean Square) function is proposed to detect the offset error component. The effectiveness of the proposed algorithm is verified through simulation and experiment results.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1257-1259
• /
• 2000

직접토크제어(DTC)가 빠른 포크 응답을 가지고있다는 것은 널리 알려진 사실이다. 이것은 기존의 벡터 제어와는 달리 공간 전압벡터에 의해 직접적으로 토크와 자속이 제어되기 때문이다. 이로 인해 직접토크제어 기법은 그것이 도입되어진 1980년대 중반 이래로 노크의 빠른 응답을 필요로 하는 분야에 점차적으로 적용되어져 왔다. 하지만 이런 장점에도 불구하고 직접토크제어는 히스테리시스 밴드, 속도 그리고 전동기 파라메타의 변화에 따른 스위칭 주파수의 변화와 토크 리플의 증가, 좋은 성능을 위한 높은 제어 주기 등의 몇 가지 단점을 가지고 있었다. 그래서 DTC의 단점들을 해결하기 위해 여러 연구들이 이루어져 왔다. 본 논문에서는 이들 단점들 중 하나인 토크리플을 개선하려한다. 다른 논문들에서도 일정 주파수를 가지는 여러 제어 기법을 사용하여 직접토크제어의 단점을 해결하려 했지만 너무 복잡하고 큰 성능을 나타내지 못했으며 몇몇 논문들은 오히려 직접토크제어의 장점인 빠른 응답성을 잃는 결과도 가져왔다. 그래서 본 논문은 간단한 개념을 가지고 토크리플을 줄이며 일정 스위칭 주파수를 가지므로 DSP를 사용하여 제어하기 용이한 직접토크제어기법을 제안하려 한다.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.3
• /
• pp.41-52
• /
• 2013

In the current condition of seeking eco-friendly development, Green Building Certification Criteria can reduce environment burden that is able to be arose in life cycles of buildings. Moreover, it is a great help to induce to constructing pleasant environment. The ripple effect that also improves saving of energy and resources of the whole country, and green-house gases reduction effect and environment friendliness of other buildings can be expected by promoting eco-friendly education facilities which accounts for a great part of public buildings in comparison with other buildings. In this study, analysis of old and new indicators' contrast and contents in Green Building Certification, and post evaluation of education facilities and interviews on authorities were proceeded for improving evaluation indicator of each item in Green Building Certification Criteria. As a result, it analyzed problems in terms of institution and operations management, and drew implications accordingly. In addition, it has a significance in that it proposes improvements of substantively applicable indicators with high applicability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.2
• /
• pp.82-90
• /
• 2015

This paper proposes an efficient bi-directional DC/DC converter topology using multi-phase interleaved method for power storage system. The proposed converter topology is used for a power storage system using a vanadium redox flow battery(VRFB) and is configured to enable bidirectional power flow for charging and discharging of VRFB. Proposed DC/DC converter of the 4 leg method is reduced to 1/4 times the rating of the reactor and the power semiconductor device so can be reduce the system size. Also, proposed topology is obtained the effect of four times the switching frequency as compared to the conventional converter in each leg with a 90 degree phase shift 4 leg method. This can suppress the reduction of the life of the secondary battery because it is possible to reduce the current ripple in accordance with the charging and discharging of VRFB and may increase the efficiency of the entire system. In this paper, it proposed bidirectional high-efficiency DC/DC converter topology Using multi-phase interleaved method and proved the validity through simulations and experiments.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.342-350
• /
• 2010

Randomizing the switching frequency (RSF) to reduce the electromagnetic interference (EMI) of switching power converters is a well-known technique that has been previously discussed. The randomized pulse position (RPP) technique, in which the switching frequency is kept fixed while the pulse position (the delay from the starting of the switching cycle to the turn-on instant within the cycle) is randomized, has been previously addressed in the literature for the same purpose. This paper presents a double-hybrid technique (DHB) for EMI reduction in dc-dc switching regulators. The proposed technique employed both the RSF and the RPP techniques. To effectively spread the conducted-noise frequency spectrum and at the same time attain a satisfactory output voltage quality, two parameters (switching frequency and pulse position) were randomized, and a third parameter (the duty ratio) was controlled by a digital compensator. Implementation was achieved using field programmable gate array (FPGA) technology, which is increasingly being adopted in industrial electronic applications. To evaluate the contribution of the proposed DHB technique, investigations were carried out for each basic PWM, RPP, RSF, and DHB technique. Then a comparison was made of the performances achieved. The experimentally investigated features include the effect of each technique on the common-mode, differential-mode, and total conducted-noise characteristics, and their influence on the converter’s output ripple voltage.