• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.819-822
• /
• 1998

A new active power filter (APF) circuit with a current compesation estimation method is proposed. The current compensation estimation method replaces a current sensor with an estimating circuit and therefore reduces the implementation cost In addition, a simple control scheme, based on the energy balance concept, is adopted to control the voltage of a DC capacitor. Therefore energy change in the DC capacitor can be compensanted in the next cycle. Since a sampling technique is used, a larger DC capacitor voltage ripple can be permissible and a relatively smaller DC capacitor can be used. The proposed method has advantages of the reduction of one current sensor, low implementation cost, and fast transient responses. The theoretical analysis and simulation results are given. The proposed control method is successfully verified by computer simulation.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.198-203
• /
• 2001

In this paper, a new predictive control algorithm considering the parameters of series active filter has been proposed to improve the performance. By using the proposed control scheme, the current ripple drastically reduced and an improved steady state performance can be obtained. The proposed method has another advantage in the size. and cost by excluding additional passive fitters. The validity of the proposed method will be proved by the computer simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.113-119
• /
• 2006

This paper studies the torque characteristics of CDTP controlled BLDCM with various back-EMF waveforms. We propose a CDTP method to suppress torque pulsation due to commutation time and point. It is adopted to control the BLDCM with real back-EMF waveforms through the Hague's method for minimizing torque ripple. Real back-EMF waveforms are produced with a magnetic fringing factor and crest width of back-EMF. The performance and characteristics of the proposed control method are analyzed by simulation and verified through experimental results.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.955-964
• /
• 2018

In this paper, an active capacitor-diode-switch (CDS) snubber is proposed for L-type current-fed isolated DC-DC converters. The proposed CDS-clamped converter has a number of advantages. It can achieve wide range zero-voltage switching (ZVS) on two switches, a continuous input current with a low ripple, a reduction of one active switch and high efficiency. The operating principles, analysis and parameter design guideline are presented. A 300 W prototype is built to test the proposed converter. Simulation and experimental results are shown at 30 V input voltage and 400 V output voltage.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.53-55
• /
• 2007

Industrial interest in switched reluctance moor (SRM) drives has varied since 1850s. This has been primarily due to the emerging markets for variable speed drives in consumer and industrial products, such as home appliances, air conditioning, hand tools, fans, pump motor, etc. However, SRM has been plagued with the acoustic noise and vibration problem by input power of fixed section. Therefore, This paper offers electromagnetic analysis for torque ripple reduction in mechanical geometry and electric parameters. This means that the rotor pole arc and electric parameters have related to produce the active and negative torque. This analysis results are verified by the finite element method.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.135-137
• /
• 2007

In this paper, an advanced torque control scheme of SRM using DITC(Direct Instantaneous Torque Control) and PWM(pulse width modulation) is presented. Different from conventional DITC method, proposed method uses one or two switching modes at every sampling time, instead of only one switching mode. The duty ratio of the phase switch is regulated according to the torque error and simple control rules of DITC. Moreover the sampling time of control can be extended, which allows implementation on low cost microcontrollers. The proposed control method is verified by the simulations and experimental results.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.308-311
• /
• 2004

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.157-158
• /
• 2014

단상 계통연계형 인버터에서 전류센서를 통한 상전류 측정시 옵셋 오차는 전류센서와 측정 경로상에 위치한 아날로그 소자의 전압 불균형 및 비선형성으로 인하여 발생하게 된다. 또한 데드타임은 전력용 반도체 스위치를 제어하기 위한 PWM 신호 출력시 필연적으로 발생된다. 본 논문에서는 데드타임으로 인하여 왜곡된 상전류에 포함된 옵셋 오차에 의한 영향을 분석하고 동기좌표계 dq축 전류에 포함된 특정 고조파 성분을 제거하기 위하여 PR 제어기를 사용한 알고리즘이 제안되었다. 데드타임 및 옵셋 오차로 인해 발생된 전류맥동 보상을 위한 기준신호로는 동기좌표계 dq축 전류를 사용하였다. 제안된 알고리즘의 타당성을 시뮬레이션과 실험을 통하여 증명하였다.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.195-196
• /
• 2014

본 논문에서는 배터리 충전 전류의 리플 저감을 위한 LLC 공진형 컨버터의 필터 설계 가이드라인을 제안한다. 출력 필터가 LLC 공진 네트워크에 끼치는 영향을 수식적으로 분석한 뒤 배터리를 고려한 필터를 설계하고 시뮬레이션을 통해 전류 리플 저감 성능을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.215-216
• /
• 2012

본 논문은 고속 소형 PMSM을 벡터제어 방식으로 구동하는 장치에서 전류 리플을 저감하기 위한 방법으로서 외부 인덕터를 추가하는 기법을 다룬다. 고속 소형 PMSM은 설계 특성상 인덕턴스가 매우 작기 때문에 전류 리플이 크게 나타나는데, 이오 인해 전동기 코어에서의 히스테리시스 손실이 증가하고 제어 시스템이 불안정하게 된다. 이 문제를 해결하면서도 벡터제어를 용이하게 할 수 있도록 인덕터를 추가하는 기법을 검토하고, 적절한 외부 인덕턴스 값을 정량적으로 결정하는 방법을 제안한다. 100 W급 50,000 rpm의 PMSM 시스템에 대하여 시뮬레이션을 실시하여 제안된 기법의 타당성을 확인한다.