• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.768-772
• /
• 2008

Today's microprocessor normally includes several processing cores to reduce the energy consumption without losing performance. In this paper, data transfer ordering mechanism can be efficiently used for cache coherence solution in unidirectional ring interconnect. RING-DATA ORDER combines the simplicity of GREEDY-ORDER and the performance of RING-ORDER. RING-DATA ORDER can be easily applicable to multicore processor with unidirectional ring interconnect.

• Communications of the Korean Mathematical Society
• /
• v.36 no.1
• /
• pp.27-39
• /
• 2021

We discuss the condition that every nonzero right annihilator of an element contains a nonzero ideal, as a generalization of the insertion-of-factors-property. A ring with such condition is called right AP. We prove that a ring R is right AP if and only if Dn(R) is right AP for every n ≥ 2, where Dn(R) is the ring of n by n upper triangular matrices over R whose diagonals are equal. Properties of right AP rings are investigated in relation to nilradicals, prime factor rings and minimal order.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.148-153
• /
• 2004

This paper represents that parts of a large generator operating in 1000 MW are affected by centrifugal forces due to high-speed rotation in 3600 rpm and 3D FEM Analyses are required to obtained the structural reliability of the generator. From these results, one would know the weakest locations and the stress distributions. The fatigue life is calculated in order to grasp the remaining life of generator. 2D and 3D analyses are performed to calculate stresses of the generator rotor and the retaining ring. From 2D results, we find the SCF at the slot and sub-slot of the rotor. 3D analysis is applied at the end part of generator rotor, which represents complex geometry, and rotor and retaining ring shrink thermally. With these results, designers of rotor and retaining ring can compare with the results of design code and verify the stress distributions of generator rotor and retaining ring, and then calculate the remaining life from the low-cycle fatigue data.

• Transactions of Materials Processing
• /
• v.27 no.3
• /
• pp.165-170
• /
• 2018

In order to increase the lifetimes of cold forging dies, insert rings are generally used. In this study, an insert ring and shrunk ring of the flange upsetting die were designed for the cold forging of an automotive wheel nut. The Stress distribution occurring in the die during forging was simulated using a commercial finite element analyzing program. The effects of the fitting interference and inclined angle of the insert ring on the compressive stress of the die inside were also investigated. The simulated data were compared with the real lifetimes of the forging dies. The maximum compressive stress acting on the edge of a forging die should have the most influence on die lifetime, an idea which could help develop the die design with the longest lifetime. The design of the most optimal forging die with the longest lifetime is made possible by analyzing the maximum inner pressure and principal stress between the shrunk ring and insert ring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1045-1054
• /
• 2020

In this paper, we designed a TCP/IP based ring buffer system that can stably transfer bulk data streams in the unstable network environments. In the scheme we proposed, The observation data stream generated and output by each radio observatory's backend system as a UDP frame is stored as a UDP packet in a large capacity ring buffer via a socket buffer in the client system. Thereafter, for stable transmission to the remote destination, the packets are processed in TCP and transmitted to the socket buffer of server system in the correlation center, which packets are stored in a large capacity ring buffer if there is no problem with the packets. In case of errors such as loss, duplication, and out of order delivery, the packets are retransmitted through TCP flow control, and we guaranteed that the reliability of data arriving at the correlation center. When congestion avoidance occurs due to network performance instability, we also suggest that performance degradation can be minimized by applying parallel streams.

• Journal of Institute of Convergence Technology
• /
• v.7 no.2
• /
• pp.13-16
• /
• 2017

The design of sealing mechanisms of a manual pressure valve was analyzed with FE analysis for a hydrogen fuels charge and discharge system of FCEV. The damage prediction of the O-ring with respect to the material models of rubbers was calculated by the gap analysis of the backup ring and O-ring according to the internal pressure. Two kinds of the rubber material characteristic models were adopted to the O-ring. One was the linear elastic and the other was hyperelastic of Ogden $3^{rd}$ order model. The experimental data of urethane of Shore hardness 90 was utilized to the curve fitting of hyperelastic properties. It was found that the contact pattern of the backup ring was different in two models and the sealing mechanism was better in the case of the hyperelastic characteristic model.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.782-785
• /
• 1994

The dissociation kinetics of linear polyaminopolycarboxylate complexes of lanthanide ions (L$n^{3+}: Ce^{3+},\;Eu^{3+}\;and\;Yb^{3+}$) has been studied in an aqueous solution of 0.10 M (NaCl$O_4$) at 25.0${\pm}0.1^{\circ}C$ using Cu(II) ions as a scavenger. The dissociation rates of acid-catalyzed pathway decrease in the order Ln(EPDTA$)^- > Ln(DPOT)^- > In(TMDTA)^- > Ln(MPDTA)^- > Ln(EDTA)^- > Ln(PDTA)^- > Ln(DCTA)^-$ according to the present and literature data. An increase in the N-Ln-N chelate ring from 5 to 6 and substitution of two methyl groups, one ethyl and hydroxyl group on a chelate ring carbon of these ligands leads to a decrease in kinetic stabilities of the complexes. The substitution of one methyl group and cyclohexyl ring on a ring carbon, however, results in a significant increase in the kinetic stability of the resulting $Ln^{3+}$ complexes. Individual reaction steps taking place for each system, with different copper, acetate buffer concentration and pH dependence, are also discussed.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.14-18
• /
• 1990

Econazole nitrate, 1-{2-[(4-chlorophenyl)methoxy]-2-(2,4-dichlorophenyl) ethy1}-1H-imidazole mono-nitrate.C18 H16 CI13 N3 O4 Mw=444.7 Monoclinic P/2₁c,a=17.337(4)A, b=15.191(5), c=7.601(3)A, β=91.72(2)', V=2000.9A3, Z=4, Dc=1.49g/cm3, Dm=1.45g/cm3(mo-ka)= 0.7107A, μ=4.31cm-1, F(000)=912.0, T=298'K, final R=0.061 for 1330 unique observed reflection. Each of the three ring system for the stars with B,A and C ring in order whilst A and C ring of econazole lie close to the same plane which is nearly 60˚with B ring. The hydrogen binding nitrogen of C ring and oxygen of nitrate contributes to stailization of econazole nitrate. Intr and intermolecular distances and angles are within the values recorded for simiar compounds.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.113.1-113.1
• /
• 2011

The Leo ring in the M96 group is unique in its morphology and size among the intergalactic gas features found in nearby universe. Its ring-like structure of 200 kpc on diameter appears to be orbiting around the M105-NGC 3384 pair with $1.67{\times}109\;M{\odot}$ of HI gas. While the origin of the ring - whether it is primordial or tidally stripped - is yet unclear, the optical and gas properties of dwarf galaxies associated with the gas ring help us to understand the formation process of this large scale intergalactic HI cloud. At the first step, we present the optical catalog of dwarf galaxy candidates in the Leo ring using deep optical images with MegaCam on the CFHT. Image convolution method is used in order to detect very faint dwarf galaxies. Comparing the ALFALFA HI data from the literature, we have identified that 4 dwarf candidates coexist with HI clumps. There are also 27 HI dwarfs with no optical counterpart and 12 optical dwarfs with no HI clump. In this work, we probe the optical and global gas properties of these dwarfs.

• Journal of the Korean Chemical Society
• /
• v.41 no.3
• /
• pp.123-129
• /
• 1997

In order to consider the reduced mass effects on the out-of-plane ring inversion vibration of 1,3-CHD, the vector-based computer program has been written and the kinetic energy expansion function for the large amplitude ring inversion vibration has been calculated using this program. The structural parameters for the calculations have been determined from the ab initio HF/6-31G** calculation. The potential energy function for the out-of-plane ring inversion vibration of 1,3-CHD has been determined from the kinetic energy expansion function and previously reported low-frequency Raman data. The vibrational Hamiltonian calculation including kinetic energy expansion function made it possible to determine the more reliable out-of-plane potential energy function for the ring inversion of 1,3-CHD.