• Computers and Concrete
• /
• 제28권6호
• /
• pp.559-566
• /
• 2021

In this paper, frequency analysis has been done for functionally graded cylindrical shell with ring supports using Sander's shell theory. The vibrations of rotating cylindrical shells are analyzed for different physical factors. The fundamental natural frequency is investigated for different parameters such as: ratios of length-to-diameter ring supports. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. The frequencies for different position of ring supports are obtained in the form of bell shaped. The backward frequencies increases and forward frequencies decrease on increasing the rotating speed. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.471-475
• /
• 2001

Planetary Speed Reducer consists of a sun gear, a planetary gear and a ring gear and if one element is fixed at this Speed Reducer, another elements operate to become a drive-axis and a subordination-axis respectively. Planetary Speed Reducer is frequently used for gear Speed Reducer because it has the advantage of having the high efficiency and getting the high Speed Reducer ratio in small space. However, it is difficult to know the current transmitted torque immediately during the use of Speed Reducer and so complicated equipment is installed in addition to protect the overload of system. The object of this paper is to design the Speed Reducer of torque- meter type that can know the torque transmitted using the power transmission feature of a simple Planetary Speed Reducer fixed at ring gear.

• 전자공학회논문지SC
• /
• 제38권6호
• /
• pp.48-55
• /
• 2001

본 논문에서 고속 가상 2단 링VCO를 내장한 1.8 GHz 주파수 합성기를 0.6m CMOS 기술을 이용하여 구현하였다. 고속 동작을 위한 링 발진기의 발진 조건을 제시하고, 출력 부하를 줄인 가상 2단 링 형태의 발진기를 제안하여 최고 1.87 GHz의 발진을 확인하였다. 이는 기존의 4단 링 VOC에 비해 21.3%의 속도가 향상된 것이다. 제안된 VCO와 함께 집적된 주파수 합성기는 위상 고정시 24ps 지터가 측정되어 고속 주파수 합성기나 고속 클럭 발진기 등에 응용이 가능함을 입증하였다.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.105-111
• /
• 2006

The floating ring seal which is used in the high pressure turbo pump is frequently used in the oxidizer pump and the fuel pump of the turbo pump of the liquid propulsion rocket, because it is able to minimize clearance to decrease the leakage flow rate. Compared with contact seal, the floating ring seal has advantage of minimizing clearance without rubbing phenomenon. But, the floating ring seal has a tendency to increase instability in operating condition in the high speed region. In this research, we devised floating ring seal which is inserted bump in the outer surface in order to improve the stability in the high speed region. Through this work, we expect to improve stability of floating ring seal with increasing the direct damping coefficient of seal and decreasing the eccentricity ratio.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.219-226
• /
• 2000

Frictional performance of ring pack in internal engine is investigated by varying spatial dimensions of ring pack and operating speed. This investigation is performed with commercial software by Ricardo Consultant Engineers, Inc. which is now in wofdwide use in automobile industries. Among the ring performances, blow-by rate, axial ring motions and frictional behaviors of top and second rings are studies in our work.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제17회 학술발표회 논문초록집
• /
• pp.15-18
• /
• 2001

In this paper, we investigate the rotordynamic characteristics of turbopump system for 9.5ton thrust liquid rocket engine. A finite element method is used to analyze the vibratior characteristics of a rotor-bearing system. The turbopump rotating system is modeled by shaft with sixty elements, nine rigid disks, four ball bearings and four floating ring seals. The calculation results show that the margin of 1st critical speed is increased from 12% to 68% by use of elastic damping ring. In addition, the margin of the 2nd critical speed near the operating speed is increased from 30% to 63% by the stiffness and damping of floating ring seals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1007-1009
• /
• 2004

This paper describes the design and the performance analysis of high speed induction motor considering end-ring using F.E.M.. To investigate the flux distribution, the induced rotor current, the designed high speed induction motor is analyzed by 3-D F.E.M.. Also, to identify the design specification, the performance characteristic is analyzed and estimated into the torque, the current and the output power at the static and the transient state.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.187-193
• /
• 1998

An inverter-driven induction motor is used as the traction motor for a high speed drive system that required safty, reliability and performance and so on. rotor bar and end ring of the traction motor are the electrical equipments which form the conductive close loop and then induce current by interaction wi th the current of stator. the materials selection of rotor bar and end ring are seriously considered in the aspects of electrical and mechanical specification and Motor slip relation to inverter. Particularly motor slip guarantee the safty and reliability of induction motor. this paper show the material selection and the determining of slip in the design of traction motor for high speed train by analyzing the specifications of material being used currently.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.48-56
• /
• 2016

In this paper, we analyze the power flow of an eight-speed automatic transmission by using a lever analogy for the manufacturing of planetary gears. The results indicate that the engine power is passed down to the carrier and ring gear in the first double pinion planetary gear (DPPG1), and to the sun gear, carrier, and ring gear in DPPG3 for the first speed. Although the power flow is similar in the second speed, the power circulation occurs in the second single pinion planetary gear (SPPG2). For the third speed, the engine power is passed from the carrier to the ring gear in DPPG, at which point the power is split between the sun gears of SPPG2 and DPPG3.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1510-1519
• /
• 1994

It is important to understand the friction characteristics between piston-ring assembly and cylinder wall for the friction loss reduction as well as the solution of problem such as scuffing wear and oil consumption. A new system was developed for the piston-ring assembly friction force measurement. This system was applied to the friction force measurement to find its functional relationship with variables such as engine speed, oil viscosity, and engine load. The friction mean effective pressure(fmep) was found to have a linear relationship with$(\vpsilon{U})^{0.42}$ under motering and with$(\vpsilon{U})^{0.45}$ under firing operations, where $\vpsilon$ is the kinematic oil viscosity and U is mean piston speed.