• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.653-661
• /
• 2012

High-availability seamless redundancy (HSR) is a redundancy protocol for Ethernet networks that provides two frame copies for each frame sent. Each copy will pass through separate physical paths, pursuing zero fault recovery time. This means that even in the case of a node or a link failure, there is no stoppage of network operations whatsoever. HSR is a potential candidate for the communications of a smart grid, but its main drawback is the unnecessary traffic created due to the duplicated copies of each sent frame, which are generated and circulated inside the network. This downside will degrade network performance and might cause network congestion or even stoppage. In this paper, we present two approaches to solve the above-mentioned problem. The first approach is called quick removing (QR), and is suited to ring or connected ring topologies. The idea is to remove the duplicated frame copies from the network when all the nodes have received one copy of the sent frame and begin to receive the second copy. Therefore, the forwarding of those frame copies until they reach the source node, as occurs in standard HSR, is not needed in QR. Our example shows a traffic reduction of 37.5%compared to the standard HSR protocol. The second approach is called the virtual ring (VRing), which divides any closed-loop HSR network into several VRings. Each VRing will circulate the traffic of a corresponding group of nodes within it. Therefore, the traffic in that group will not affect any of the other network links or nodes, which results in an enhancement of traffic performance. For our sample network, the VRing approach shows a network traffic reduction in the range of 67.7 to 48.4%in a healthy network case and 89.7 to 44.8%in a faulty network case, compared to standard HSR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.21-33
• /
• 2007

An overlay network is a virtual network which is constructed on top of a physical computer network. A node in the overlay network is connected through virtual or logical links, where each link corresponds to a path of the links in the underlying physical network. Overlay networks are suitable for sharing heterogeneous resources in distributed environments, However, overlay networks are limited for achieving reliable communication that failure detection in overlay networks is a very important issue. In this paper, we review conditions of conventional failure detection and propose a new approach to failure detection and resilience which can be applied to HRing (Hierarchical Ring) overlay networks. The proposed method consists of the failure detection and the failure resilience phases. Because it utilizes the characteristics of the HRing overlay network for failure detection, it can reduce unnecessary network traffic and provide better scalability and flexibility. We also analyzed and evaluated the performance of the proposed approach through simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.777-781
• /
• 2004

This paper presents an algorithm for multichannel slotted-ring topology medium access protocol (MAC) using in wavelength division multiplexing (WDM) networks. In multichannel ring, there are two main previously proposed architectures: Tunable Transmitter - Fixed Receiver (TTFR) and Fixed Transmitter - Tunable Receivers (FTTR). With TTFR, nodes can only receive packets on a fixed wavelength and can send packets on any wavelengths related to destination of packets. Disadvantage of this architecture is required as many wavelengths as there are nodes in the network. This is clearly a scalability limitation. In contrast, FTTR architecture has advantage that the number of nodes can be much larger than the number of wavelength. Source nodes send packet on a fixed channel (or wavelength) and destination nodes can received packets on any wavelength. If there are fewer wavelengths than there are nodes in the network, the nodes will also have to share all the wavelengths available for transmission. However the fixed wavelength approach of TTFR and FTTR bring low network utilization. Because source node with waiting data have to wait for an incoming empty slot on corresponding wavelength. Therefore this paper presents Tunable Transmitter - Tunable Receiver (TTTR) approach, in which the transmitting node can send a packet over any wavelengths and the receiving node can receive a packet from any wavelengths. Moreover, the self-similar distributed input traffic is used for evaluation of the performance of the proposed algorithm. The self-similar traffic performs better performance over long duration than short duration of the Poison distribution. In order to increase bandwidth efficiency, the Destination Stripping approach is used to mark the slot which has already reached the desired destination as an empty slot immediately at the destination node, so the slot does not need to go back to the source node to be marked as an empty slot as in the Source Stripping approach. MATLAB simulator is used to evaluate performance of FTTR, TTFR, and TTTR over 4 and 16 nodes ring network. From the simulation result, it is clear that the proposed algorithm overcomes higher network utilization and average throughput per node, and reduces the average queuing delay. With future works, mathematical analysis of those algorithms will be the main research topic.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.69-78
• /
• 2004

This paper proposes architecture and characteristics of a multi-ring based optical network with single-hop between edge nodes using the concept of circuit switching and multi-wavelength label switching to solve delay problem caused by applying crossconnectors as transit nodes in the wavelength division multiplexing(WDM) network. We suggest multi-ring based architecture composed single and multiple wavelength-bands with multi-wavelength labels, and analyze characteristics of two models. To avoid the packet collision in output ports of edge nodes due to output contention, the static and dynamic allocation scheme, which packets are allocated in time slots, is provided. Based on our analysis, it shows that delay only occur in not core nodes but edge nodes in the proposed architecture. In addition, we evaluate the probabilities of delay, packet loss, and call blocking in the proposed optical packet network.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2652-2654
• /
• 2005

A vacuum chamber temperature control system of Pohang Accelerator Laboratory (PAL) storage ring is a subsystem upgraded PAL control system, which is based upon Experimental Physics and Industrial Control System (EPICS) [1]. There are two control components, data acquisition system (SA120 data logger), development control system IOC (Input/Output Controller) at the storage ring of PAL. There are 240 vacuum chamber at the storage ring. It was a very important problem to solve how to monitor such a large number of vacuum chamber temperature distributed around the ring. The IOC connect MODBUS/JBUS field network to asynchronous serial ports for communication with serial device. It can simultaneously control up to 4 data acquisition systems. Upon receiving a command from a IOC running under Windows2k through the network, the IOC communicate through the slave serial interface ports to SA120. We added some software components on the top of EPICS toolkit. The design of the vacuum control system is discussed. This paper describes the development vacuum chamber temperature control system and how the design of this system.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.367-375
• /
• 2014

In this paper, a novel triple-band circular-ring monopole antenna with a half-circular ring and ground slot for wireless local area network/Worldwide Interoperability of Microwave Access (WLAN/WiMAX) applications is proposed. The proposed antenna consists of one circular ring, a half-circular ring and a rectangular slot in the ground plane. Based on the concept, a prototype of the proposed triple-band antenna was designed, fabricated and tested. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. Furthermore, this paper presents and discusses the 2D radiation patterns and 2D gains according to the results of the experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1945-1956
• /
• 1994

In this paper, a multiaccess network protocol for high-speed communication is proposed, which enables multimedia sevices with integrating the existing networks. We examine the traffic control mechanisms and configurations for the network architecture and compare with various protocols which are suitable to high speed LAN/MAN and propose an adaptive access control mechanism. ATMR has low channel utilization due to window size reset time, and that MetaRing is very sensitive over the change of traffic load. This suggested protocol, however, has quite a good performance for that situation by adding adaptive parameter condition. This mechanism may introduce a model of small-scaled Broadband Integrated Service Network and be used as an internetworking system for the ATM network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.511-518
• /
• 2007

One of the major issues that has to be carefully considered when upgrading current transport network capacity, is network scalability. A novel full-meshed connected ring expansion methodology and planning tool have been proposed. A 3 to 15 node expansion ring has been studied by demonstrating a dramatic system SNR improvement when the proposed planning tool was used. The results are that node output signal and optical SNR have been improved from -16dBm/10dB to +005dBm/21dB by NPOT.