• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.589-597
• /
• 2007

In this paper, a WDM metro ring consisting of access nodes with $FT-FR^n$ (Fixed Transmitter - n Fixed Receivers) is considered. A trade-off exists between node throughput and transmission fairness because the access nodes share wavelength channels. In order to eliminate the transmission unfairness and to increase throughput, the p-persistent medium access control (MAC) protocol is proposed: each node uses an empty optical slot to transmit a packet and make it available with the extraction of a transferred packet at the source access node, called source-stripping. The local empty slot can be used to transfer a head-of-line packet in the local buffer with probability p or it is used for the next downstream nodes with 1-p. The proposed MAC protocol provides better node throughput than the non-persistent protocol and exhibits better fairness index than the 1-persistent protocol in WDM ring networks. In addition, numerical analysis shows that the proposed MAC protocol maximizes the node throughput under uniform traffic conditions. For more detailed results, we use the network simulation under Poisson and self-similar traffic. Furthermore, unpredictable traffic constructed by the combination of the former and the latter is also considered. The reasonable probability of the p-persistent protocol for a given architecture can be determined through simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1109-1120
• /
• 2019

In the field of VLBI, If the quality of the connected network between the VLBI station and the correlation center is ensured, the existing inefficiency of repeatedly storing the observation data in each station and the correlation center can be overcome. In other words, the data center can be unified with the correlation center where data analysis is performed, which can improve data processing speed and productivity. In this paper, we design a massive VLBI data system that directly transmits and stores the observation data stream obtained from the VLBI station to the correlation center via the high - speed network KREONET. Based on this system, VLBI test observations confirmed that the observation data was stored perfectly in the recording system of the correlation center without a single packet loss.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• Korea-Australia Rheology Journal
• /
• v.21 no.3
• /
• pp.193-200
• /
• 2009

We present a direct simulation technique for two-dimensional mold-filling simulations of fluids filled with a large number of circular disk-like rigid particles. It is a direct simulation in that the hydrodynamic interaction between particles and fluid is fully considered. We employ a pseudo-concentration method for the evolution of the flow front and the DLM (distributed Lagrangian multipliers)-like fictitious domain method for the implicit treatment of the hydrodynamic interaction. Both methods allow the use of a fixed regular discretization during the entire computation. The discontinuous Galerkin method has been used to solve the concentration evolution equation and the rigid-ring description has been introduced for freely suspended particles. A buffer zone, the gate region of a finite area subject to the uniform velocity profile, has been introduced to put discrete particles into the computational domain avoiding any artificial discontinuity. From example problems of 450 particles, we investigated the particle motion and effects of particles on the flow for both Newtonian and shear-thinning fluid media. We report the prolonged particle movement toward the wall in case of a shear-thinning fluid, which has been interpreted with the shear rate distribution.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.3
• /
• pp.191-204
• /
• 2013

In this paper, we investigated the correlation outputs of Daejeon correlator at the viewpoints of the buffer memory setting related to the fine delay tracking and the under/overflow issue in FFT modules, in order to eliminate DC-like component and phase concentration to 0 degree. As the ring buffer memory is being used for the fine delay tracking, the DC-like component in correlation outputs is generated by improper setting of data read/write address, and then that address setting method is modified to exclude a polluted FFT segment in correlation processing when crossing the port/stream boundary. The phase concentration to 0 degree at beginning of bandpass is caused by inadequate scaling factors, which may be the origins of under/overflow occurred at internal computation of FFT stage. With the revised method of the ring buffer memory setting and the scaling factors in FFT, we could obtain higher signal-to-noise ratio and flux density, compared to the previous method, through the correlation processing of true observational data.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.2
• /
• pp.55-60
• /
• 2008

Packet-switched wavelength division multiplexing (WDM) ring networks have been extensively studied as solutions to the increasing amount of traffic in metropolitan area networks, which is widely expected to be a mix of unicast and multicast traffic. In this paper we study the fairness between unicasting and multicasting in slotted packet-switched WDM ring networks that employ a tunable transmitter and fixed tuned receiver at each node and a posteriori buffer selection. We find that single-step longest queue selection algorithm generally results in unfairness between unicasting and multicasting or a lilted relative priority for multicast vs. unicast traffic. We present the various virtual output queue structures and their performance.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.7-14
• /
• 2002

Laser ablation ion trap mass spectrometry (LAITMS) was developed for the analysis of metal and ceramic samples. For this study, XeCl excimer laser (308 nm) was used for ablating the samples and ITMS was used as a detector. Samples were introduced from outside of a ring electrode and this way of sample introduction was very effective for solid samples when laser ablation was employed. Helium gas was used as a buffer gas, and its effect on sensitivity and some parameters (buffer gas pressure, ion storage time, and cut-off RF voltage) were studied. The optimized conditions were $1{\times}10^{-4}$ Torr of buffer gas pressure, 100 ms of ion storage time and $1150V_{p-p}$ of cut-off RF voltage. From that results, copper (Cu) and molybdenum (Mo) metals were tested with LAITMS and the mass spectra of these pure metals were compared with the natural abundance of isotope ratio. We also examined ceramic samples ($Al_2O_3$, $ZrO_2$) and represented the result of elemental analysis.

• The Korean Journal of Zoology
• /
• v.15 no.3
• /
• pp.133-147
• /
• 1972

Ultrastructures of spermiogeneis in other invertebrates were investigated by several workes (Anderson, et al., 1967; Bloch, et al., 1964; Christen, 1961; Gatenby, et al., 1959; Paik, et al., 1968; Silveira, 1964; Yasuzumi, 1957) but spermiogenesis of dragonfly has not been reported previously. Testes and vass deferentia of the Korean dragonfly, Crocothemis servilia, were used for electron microscopic study of spermiogenesis. Materials were prefixed for 1-2 hours at $3^{\circ}C$ in 1.25% glutaraldehyde buffered to pH 7.2 with 0.2M sodium cacodylate buffer. Fixed tissue was washed twice in 0.2M cacodylate buffer and was subsequently postfixed for 2 hours at $3^{\circ}C$ in 1% osmium tetroxide buffered to pH 7.2 with 0.4M sodium cacodylate buffer solution. Specimens were dehydrated in graded ethyl alcohol, and finally embedded in epoxy Epon resin. Thin sections prepared from all the blocks were doubly stained; first in uranyl acetate and then in lead citrate. All thin sectios were examined with a Hitachi HS-7S electron microscope. The results of this study were summarized as follows. 1. Along the condensation of chromatin in nucleus, the shpae of nucleus was changed from spherical shpae to ellipse and cone cell type. 2. During the elongation of nucleus and the migration of cytoplasm, the nucleus removed to the one side of spermatid and began to invaginate from the posterior portion of nucleus. 3. There are ring centrioles in invaginated portion and axial filaments derived from centriole extend to the tail through the tailward half of spermatid. 4. In the cross sections the axial filament consisted of a central sheath, a central fibril, and 9 peripheral doublets.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.75-84
• /
• 2017

It becomes more and more more important for the storage that supports high speed recording and stable access from network environment. As one field of basic science which produces massive astronomical data, VLBI(: Very Long Baseline Interferometer) is now demanding more data writing performance and which is directly related to astronomical observation with high resolution and sensitivity. But most of existing storage are cloud model based for the high throughput of general IT, finance, and administrative service, and therefore it not the best choice for recording of big stream data. Therefore, in this study, we design storage system optimized for high performance of I/O and concurrency. To solve this problem, we implement packet read and writing module through the use of libpcap and pf_ring API on the multi core CPU environment, and build a scalable storage based on software RAID(: Redundant Array of Inexpensive Disks) for the efficient process of incoming data from external network.