• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.148-152
• /
• 2001

Cotton yarns were coated with a polymer solution to hold surface fibers to the yam body, which caused fiber-fly generation during knitting process. The physical property of the coated yarn, especially a bending rigidity was investigated in order to evaluate the performance of the coated yam during knitting. SEM images showing the surface condition of the coated yarn demonstrated that the thickness of a coating material increased as the concentration of the coating solution increased. The results of the bending rigidity measured using KES-FB2 system showed that the bending rigidity of the coated yam increased as the concentration of the coating solution increased. The results also revealed the possibility that yarn coated with a low amount of coating material should be employed for further research of reducing fiber-fly generation during knitting process.

• KCI Concrete Journal
• /
• v.14 no.3
• /
• pp.111-120
• /
• 2002

This study proposes a joint model consisting of different types of members as a new structural system, and then investigates the resulting structural behavior. The joint model consists of a concrete-filled steel tube column (CFT) together with a steel reinforced concrete at the end plus reinforced concrete beam at the center. For comparison, two other joint models were designed, that are, a CPT with a reinforced concrete beam, and a CFT with a steel reinforced concrete at the end plus steel concrete beam at the center, then their joint capacity and rigidity, energy absorption capacity, etc., were all investigated. From the results, the CFT column with a steel reinforced concrete at the end plus steel concrete beam at the center was outstanding in terms of its capacity and rigidity. The results of this analysis demonstrate that an adequate connection type and reinforcement method with different materials of increasing the rigidity, thereby producing a capacity improvement along with protection from pre-fractures.

• Journal of Welding and Joining
• /
• v.25 no.1
• /
• pp.37-41
• /
• 2007

The purpose of this study is to establish the predictive method of angular distortion of the double-sided multi-pass butt weldment achieve it, the behavior of angular distortion in the butt weldment were investigated using comprehensive finite element analyses and experiments. The angular distortion in the multi-pass butt weldment strongly depends on the welding heat input(Q) and the effective bending rigidity of the weld throat. The effective bending rigidity of the first welding pass on the backing side was defined as the function of dimensionless parameter(k) and a bending rigidity of bead-on-plate weldment. Based on the results, the predictive equation for angular distortion of multi-pass butt weldment was proposed and verified by experiments.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.75-80
• /
• 2017

In this study, seismic performance of various types of valve supports in terms of flexural rigidity are evaluated by FEA using equivalent static load method. Flexural rigidity of the existing two types of valve supports can be effectively improved by simply adding one more bracket on the other side of support. New types of polygonal valve supports with a concept of fully stressed beam theory are suggested and it is verified that the new supports are rigid enough to withstand stronger earthquake which we should be prepared for.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.7 no.1
• /
• pp.1-9
• /
• 1983

This study was undertaken to explore the relationships between the personality characteristics (the rigidity and the acceptance of self and others) and the clothing behaviors according to the age and the occupation. The results were as follows; 1. In the clothing behavior, the subjects scored highest in aesthetics followed by comfort, modesty, management, dependence, interest, attention and approval in a descending order. 2. There was no significant relationship between the acceptance and the rigidity characteristics. 3. There was a highly significant relationship between the personality characteristics and the clothing behaviors. 4. There were significant differences in the rigidity characteristics and in modesty, comfort, management clothing variables according to the age. 5. There were significant differences in self-acceptance, rigidity characteristics and in management clothing variable according to the occupational status. 6. No significant interactions was found between age and occupation on personality characteristics and clothing behaviors.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.548-553
• /
• 2008

Low Floor buses have no steps to get on or get off the main cabin to provide the old and the handicapped with easy access. The car body for the low floor bus was designed to consider Korean physical standard, passenger capacity (standee, seated, handicapped), arrangement of vehicle components, and bus law or regulations. It was designed as an one body, without any reinforcement armature, which has light-weight sandwich constructions with glass epoxy skins, aluminum honeycomb cores and inner-frames. In this paper, torsion rigidity of the designed car body was evaluated and compared with that of a car body with reinforcement armatures in the cabin. Finite element method verified that the designed car body without reinforcement armatures could satisfy requirements of torsion rigidity.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.95-99
• /
• 2008

Applications of composite materials in various engineering fields have been extended significantly. For being useful composite materials, we could modify the rigidity and strength characteristics of composite material according to structures and material direction. In this study, CFRP, which has been widely used in space leisure and general structural applications due to the weight, elasticity coefficient, high fatigue strength and lower thermal transformation ect, was selected. As the CFRP is an anisotropic material whose mechanical properties change with its stacking sequence or angle, special attention was given to the effects of the fiber orientation angle on the bending characteristics of CFRP fiat and CFEP square members. It's different on the each result of strength and rigidity of CFRP flat and CFRP square members.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.9-14
• /
• 1996

The deflection of an end mill is very important in machining process and cutting simulation because it affects directly workpiece accuracy, cutting force, and chattering. In this study, the deflection of the end mill was studied both experimentally and by using finite element analysis. And the moment of inertia of radial cross sections of tile helical end mill is calculated for the determination of the relation between cross section and rigidity of tile tools. Using tile Bernoulli-Euler beam and and the concept of equivalent diameter, a deflection model is established, which includes most influence from tool geomety parameters. It was found that helix angle attenuates the rigidity of the end mill.

• Journal of the Ergonomics Society of Korea
• /
• v.9 no.1
• /
• pp.29-33
• /
• 1990

The need for the protection of workers in many industrial workstations has long been recognized, and many type of protective equipment have been devised. In many protective equipment designs, this study set limits to the safety helmet. The direct closed head impact problem was idealized as a linear-damped spring model. This study concerns what properties of helment should afford optimal protection in a direct closed head impact problem. The solution to the problem was achieved through analytic method and numerical computation. The answer was found in terms of 4 parameters : 1) rigidity of shell, 2) viscosity of shell, 3)rigidity of harness, 4) viscosity of harness. The choices are as follows 1) to reduce the rigidity value of harness as small as possible 2) to increase the viscosity value of harness as large as possible. 3) to select the rigidity value of shell sufficient for preventing a breakage.

• Communications of the Korean Mathematical Society
• /
• v.12 no.2
• /
• pp.365-371
• /
• 1997

We prove some relation of volume with the covering radius of Riemannian manifolds and reprove well-known sphere rigidity theorems by using it.