• Title/Summary/Keyword: rigidity

Search Result 1,449, Processing Time 0.036 seconds

A Study on the Development of Lightweight Seat Cushion Extension Module (경량형 시트 쿠션 익스텐션 모듈 개발에 관한 연구)

  • Jang, Hanseul;Choi, Seongkyu;Park, Sang-Chul;Lim, Heon-pil;Oh, Eu-Ddeum
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.8
    • /
    • pp.200-207
    • /
    • 2016
  • The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

A Study on the Reduced Rebound Method of Surface Finishing Spray Photocatalytic Mortar (표면 마감 광촉매 스프레이 모르타르의 리바운드량 저감 방안 연구)

  • Baek, Hyo-Seon;Park, Jeong-Hwan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.9
    • /
    • pp.604-609
    • /
    • 2020
  • There are various methods of finishing concrete surfaces, and when considering workability, the spray method is effective, but rebound occurs. The allocation of rebound occurrence control should be adjusted according to the materials used. Thus, a basic study was conducted on multiple techniques for reducing the rebound incidence that are suitable for surface finishing materials containing a photocatalyst. A prior study derived the reduction effect and optimal mix ratio for photocatalytic performance. Based on that study, the rebound reduction was verified according to the specifications of the content and the mechanical durability characteristics of the mixed materials. Rebound, compressive strength, flexural rigidity, and table flow tests were done. The flow was fixed at 170±10 mm considering the workability of the mortar spray equipment. For the experimental variables, the rebound number was adjusted to the silica sand variables relative to the cement weight, and silica sands No. 5 and No. 7 were used. The results show the highest compression strength in the final S-1 variable, and the amount of rebound was minimized. These results were sufficiently filled with the bindings of the silica pores, which increased the binding force between the aggregates, resulting in a lower amount of rebound.

The Clinical Study on 1 Case of Patient with Adult-onset Still's Disease who had a Diffuse Cerebral Dysfunction developed after Hypoxia. (A case of Adult-onset Still's Disease and Diffuse Cerebral Dysfunction) (저산소증으로 미만성 뇌피질 손상이 유발된 성인형 스틸병 환아(患兒) 1례(例) 보고(報告))

  • Song, In-Sun;Shin, Ji-Na;Song, Mi-Jin;Lee, Jeong-Lim
    • The Journal of Pediatrics of Korean Medicine
    • /
    • v.17 no.2
    • /
    • pp.15-26
    • /
    • 2003
  • Objective : There were few reports on the treatment of Adult-onset Still's disease and Diffuse cerebral dysfunction. This oriental medical treatment shows the possibility of healing Adult-onset Still's disease and Diffuse cerebral dysfunction, therefore we announce this. Methods : The acupuncture, herbal medicine, herbal acupucture(Jahageo, Nockyong) therapies were applied for treating this patient's chief symptom(chest discomfort, palpitation, rigidity, mentality change, global aphasia, dysphagia, coughing and sputum) Results : 1. Adult-onset Still's disease is a rare systemic inflammatory disorder of unknown etiology, characterised by salmon-colored rash, intermittent spiking high fever, arthralgia and variety of systemic features. This is one type of Juvenile arthritis. 2. Diffuse cerebral dysfunction is an anoxic-ischemic encephalopathy, and most cause of this is the hypoxia caused by hypotention or respiratory distress. 3. After oriental medical treatments, his chief symptoms were improved. Conclusion : The more study about oriental medical treatment on Adult-onset Still's disease and Diffuse cerebral dysfunction is needed.

  • PDF

Current Treatment of Tibial Pilon Fractures (경골 천정(pilon) 골절의 최신 치료)

  • Lee, Jun-Young
    • Journal of Korean Foot and Ankle Society
    • /
    • v.15 no.2
    • /
    • pp.51-57
    • /
    • 2011
  • Pilon fractures involving distal tibia remain one of the most difficult therapeutic challenges that confront the orthopedic surgeons because of associated soft tissue injury is common. To introduce and describe the diagnosis, current treatment, results and complications of the pilon fractures. In initial assessment, the correct evaluation of the fracture type through radiographic checkup and examination of the soft tissue envelope is needed to decide appropriate treatment planning of pilon fractures. Even though Ruedi and Allgower reported 74% good and excellent results with primary open reduction and internal fixation, recently the second staged treatment of pilon fractures is preferred to orthopedic traumatologist because of the soft tissue problem is common after primary open reduction and internal fixation. The components of the first stage are focused primarily on stabilization of the soft tissue envelope. If fibula is fractured, fibular open reduction and internal fixation is integral part of initial management for reducing the majority of tibial deformities. Ankle-spanning temporary external fixator is used to restore limb alignment and displaced intraarticular fragments through ligamentotaxis and distraction. And the second stage, definitive open reduction and internal fixation of the tibial component, is undertaken when the soft tissue injury has resolved and no infection sign is seen on pin site of external fixator. The goals of definitive internal fixation should include absolute stability and interfragmentary compression of reduced articular segments, stable fixation of the articular segment to the tibial diaphysis, and restoration of coronal, transverse, and sagittal plane alignments. The location, rigidity, and kinds of the implants are based on each individual fractures. The conventional plate fixation has more advantages in anatomical reduction of intraarticular fractures than locking compression plate. But it has more complications as infection, delayed union and nonunion. The locking compression plate fixation provides greater stability and lesser wound problem than conventional implants. But the locking compression plate remains poorly defined for intraarticular fractures of the distal tibia. Active, active assisted, passive range of motion of the ankle is recommended when postoperative rehabilitation is started. Splinting with the foot in neutral is continued until suture is removed at the 2~3 weeks and weight bearing is delayed for approximately 12 weeks. The recognition of the soft tissue injury has evolved as a critical component of the management of pilon fractures. At this point, the second staged treatment of pilon fractures is good treatment option because of it is designed to promote recovery of the soft tissue envelope in first stage operation and get a good result in definitive reduction and stabilization of the articular surface and axial alignment in second stage operation.

Case of Combined Acute Poststreptococcal Glomerulonephritis and Acute Invasive Meningococcal Disease (A군 연구균 감염 후 급성 사구체 신염과 동반된 침습성 수막구균감염증 1례)

  • Jeon, Hosang;Hahn, Wonho;Park, Dongkyun;Cha, Sungho
    • Pediatric Infection and Vaccine
    • /
    • v.11 no.1
    • /
    • pp.126-130
    • /
    • 2004
  • Neisseria meningitidis is a leading cause of meningitis and septicemia in children and young adults. Meningococcemia, the most severe form of infection, represents a part of the various spectrum of the illness, and its clinical manifestations varied from mild fever and occult bacteriemia to fulminant catastrophic events(e.g., sepsis, shock, and death) within a few hours after onset of symptoms. Complement deficiencies, either congenital or acqired, increase the risk for invasive meningococcal disease. Since C3 plays a critical role in the complement cascade, congenital C3 deficiency or conditions that decrease C3(e.g., systemic lupus erythematosus, cirrhosis, nephritis, C3 nephritic factor) increase the risk for invasive disease due to pyogenic bacteria including N. meningitidis. We had experienced a case of meningococcemia and meningococcal meningitis presenting with mild fever, petechiae, and purpura. The patient was a 7-year old male. He had mild fever, vomiting, headache, nuchal rigidity, petechiae and purpura on both lower extremities, which spreaded to the whole body. His blood culture grew Neisseria meningitidis. The diagnosis of meningococcal meningitis was confirmed by examination of cerebrospinal fluid. The clinical symptoms of the illness were improved after treatment of antibiotics(cefotaxime) for 12 days. However the patient had developed generalized edema, microscopic hematuria & proteinuria on the third day after admission. High ASO titer and low serum C3 level were also noted. The microscopic hematuria returned to normal about 2 months after discharge. The C3 level returned to normal range about 3~4 months after discharge. we report a case of combined acute poststreptococcal glomerulonephritis and acute invasive meningococcal disease with reference review.

  • PDF

The Effective Reduction Method of Unstable Zygomatic Arch Fracture with Thermo-Splint (Thermo-splint를 이용한 불안정한 관골궁골절에 대한 효과적인 고정방법)

  • Kim, Sun Heum;Lee, Soo Hyang;Choi, Hyun Gon;Shin, Dong Hyeok;Uhm, Ki Il;Song, Wu Chul
    • Archives of Plastic Surgery
    • /
    • v.35 no.1
    • /
    • pp.110-115
    • /
    • 2008
  • Purpose: The objective of this study is to propose an effective management of unstable zygomatic arch fracture. The reduction methods of arch fracture were relatively simple but the maintenance of reduction state is very troublesome. On this, authors introduce an effective management method of unstable zygomatic arch fracture. Methods: Authors experienced 23 cases of unstable segmental zygomatic arch fractures and used Thermo-splint in all cases. All the arch fractures were reduced through Gillies' approach under the general anesthesia. After the reduction, the most effective suspension points were marked on the covering skin of the fractured arch. A needle of heavy nonabsorbable suture material was inserted toward the marking site under the reduced zygomatic arch. And then Therm-splint was dipped in the hot water, and we got the splint pattern of patient face. Reshaped Thermo-splint was trimmed and fixated with previous suspension suture materials. More additive suspension was done if necessary. The splint was applied for in two to three weeks postoperatively. Results: In all the cases, good cosmetic and functional results were observed without severe complications. There were 4 cases of incomplete reductions but they also had no specific problems. There were no facial nerve symptom and scar(stitch mark). Postoperative slight tenderness and trismus were completely subsided after removal of the splint. Conclusion: The Thermo-splint safely protect and maintain the postoperative reduction state. The application, maintenance and removal were easy and simple. It could be reformed to any contour of face and had enough rigidity for supporting. Above all these things, effective prevention of displacement and easy manipulation were significant merit. Authors experienced good results with Thermo-splint, and would introduce it for another method of management of zygomatic arch fracture.

Inelastic Time History Analysis of a Five-Story Steel Framed Structure Considering Rigidity of TSD Connection (TSD 접합부의 강성을 고려한 5층 철골골조구조물의 비탄성 시간이력해석)

  • Kang, Suk-Bong;Lee, Jae-Hwan
    • Journal of Korean Society of Steel Construction
    • /
    • v.22 no.3
    • /
    • pp.281-291
    • /
    • 2010
  • In this study, a five-story steel frame was designed in accordance with KBC2005 to evaluate the effects of the beam-column connection on the structural behavior. The connections were designed as fully rigid and semi-rigid. The fiber model was used to describe the moment-curvature relationship of the steel beam and the column, the power model for the moment-rotation angle of the semi-rigid connection and the three-parameter model for the hysteretic behavior of the steel beam, column, and connection. The structure was idealized as separate 2-D frames and as connected 2-D frames. The peak ground accelerations of four earthquake records were modified in a time-history analysis for the levels of the mean return period and for the maximum base-shear force in a pushover analysis. The top story displacement, base-shear force, story drift, demanded ductility ratio for the semi-rigid connection, maximum bending moment of the column, beam, and connection, and distribution of the plastic hinge were examined in the time-history analysis. The frame with the semi-rigid connection yielded a lower base-shear force, less magnitude, and increasing ratio in the bending moment of the column, beam, and connection than the frame with a fully rigid connection. The TSD connection was deemed to have secured the economy and safety of the sample structure that was subjected to seismic excitation for the Korean design level.

A Study on the Mechanical Properties of Fabrics for Korean Folk Clothes (Part 2) On the Women's Fall & Winter Fabrics (한복지의 역학적 특성에 관한 연구 (제2보) 여자용 추동한복지)

  • Sung Su-Kwang;Kouh Jae-Oon;Kwon Oh-Kyung
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.12 no.2 s.27
    • /
    • pp.169-179
    • /
    • 1988
  • In the part 1, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's fall & winter fabrics were measured by KES-F system. Sorts of 90 commercial fabrics for women's fall & winter clothes were classfied into 39 silk and 51 polyester fabrics according to meterials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. Furthermore, there mechanical properties as well as their hand values were discussed in comparison with those values for kimono fabrics. The main results are summarized as follows; 1. The shape of silk fabrics in formation for weared clothes show a box-shaped silhouette. Polyester fabrics has a easy to shape-less and make a silhouette which goes along with the body. 2. Silk fabrics for Korean women's fall & winter clothes have ${\pm}1\sigma$ range of bending, shearing, surface properties and thickness as compared with kimono fabrics. 3. A wrinkle recovery and drapability of silk fabrics for Korean women's fall & winter clothes are inferior to kimono fabrics. On the other hand, the fabrics for Korean women's fall & winter clothes have conical-shaped silhouette based on higher bending rigidity. 4. Except for flexibility with soft feeling, a primary factor of mechanical properties contributes to the hand values of fabrics for Korean women's fall & winter clothes having no concern with materials were same as the women's summer fabrics. 5. As for the hand values of fabrics for Korean folk clothes, stiffness, anti-drape stiffness are larger than those of kimono fabric and stiffness, anti-drape stiffness, crispness of fabrics for Korean women's fall & winter clothes have smaller values as compared with Korean women's summer fabrics.

  • PDF

Korean Experiment for the Unification of Multiple Health Insurers : A Road to Success or Failure (한국 의료보험의 통합일원화 : 성패의 갈림길)

  • 김병익
    • Health Policy and Management
    • /
    • v.10 no.3
    • /
    • pp.108-128
    • /
    • 2000
  • The Korean government has implemented the policy for merging 141 health insurers into Korean Unified Health Insurer (KUHI) in July of 2000. The unification of multiple insurers will definitely effect the stability of financial management, equity of premium burdens and efficiency of administrative management. However, it is difficult to predict what forms the far-reaching effects of the unification would take. Thus, pursuing the unification may be express as a huge policy experiment. In order to lead the unification, which lies on a crossroad between success and failure, to the road of success, we need to infer the problems and obstacles predicted in the step-wise processes of merging organizations, finances and the systems of computing premium, and come up with the effective means to maintain the stability of financial management, to improve the equity of premium burdens and to increase the efficiency of administrative management. Thus, I first described the changes of the Korean medical insurance system, and analyzed the performances of self-employed medical insurance 1 year after the integration of societies in October of 1998. At the base of examining the stability of financial management, equity of premium burdens and efficiency of administrative management, I predicted the problems and obstacles that could occur after the unification of the multiple medical insurers, and proposed a few ways of leading the unification of the multiple medical insurers in Korea to success. The most worried factor is that insurance finance would become unstable since the expansion of premium revenues is not easy because raising the premium for all Koreans is to be difficult. In addition, the unification of insurance finance could weaken the insurer's efforts for declaring real incomes of the self-employed and increasing the collection rate of premiums from them. This weakening would be the decisive factor of lowering the equity of premium contributions between the self-employed and employees. And bureaucratization and rigidity that are unavoidable in a gigantic unified organization could lower the efficiency of administrative management. Furthermore, by having 3 labor unions in the unified organization, it is possible to experience frequent difficulties and discords among the unions and between the unions and organization. Thus, when smooth pursuing of the unification of multiple insurers gets difficult, the social expenses derived from the failure would eventually end up on all Koreans. The unification is to be performed after coming up with the ways to eradicate these worries, so that the unification of multiple insurers would step onto the road of success.

  • PDF

Engineering Properties of Semi-rigid Pavement Material Produced with Sulfur Polymer Emulsion and Reinforcing Fibers (Sulfur Polymer Emulsion 및 보강용 섬유를 활용한 반강성 포장재의 공학적 특성)

  • Lee, Byung-Jae;Seo, Ji-Seok;Noh, Jae-Ho;Kim, Yun-Yong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.18 no.1
    • /
    • pp.119-127
    • /
    • 2014
  • The application of sulfur polymer emulsion (SPE) as an acrylate substitute for semi-rigid pavement grout was evaluated, and the performance improvement by employing PVA fibers were also evaluated. The result indicated that the filling ratio of semi-rigid pavement material decreased as the fiber content increased, but it was measured to be 92~94% in every mixing condition, which satisfies the target performance, 90%. The maximum Marshall stability value of semi-rigid pavement material was measured to be 25.4 kN, which is about 4.7 times higher than the Korean Standard required for semi-rigid pavement material, 5.0 kN. The dynamic stability evaluation of semi-rigid pavement material indicated that the resistance to deformation from the wheel tracking test was improved by an SPE substitution, and in every mixing condition, the deformation converged to a constant value after 45 minutes with the same dynamic stability of 31,500 times/mm. The strain at the flexural failure was about 0.53%, which shows superior rigidity to asphalt pavements. The examination of abrasion resistance and impact resistance showed that the loss ratio was 9.8~6.0% in every mixing condition, which indicates a good abrasion resistance. Also, when fiber content ratio was 0.3%, the impact resistance was 2.82 times higher compared to plain (i.e., when fibers were not added). In the limited range of this study, an SPE substitution ratio of 30% was found to be an optimal level considering the mechanical and durability performance. In addition, it is thought that semi-rigid pavement material with superior performance could be manufactured if fiber content ratio up to 0.3% is applied depending on the purpose of use.