• Pediatric Infection and Vaccine
• /
• v.11 no.1
• /
• pp.126-130
• /
• 2004

Neisseria meningitidis is a leading cause of meningitis and septicemia in children and young adults. Meningococcemia, the most severe form of infection, represents a part of the various spectrum of the illness, and its clinical manifestations varied from mild fever and occult bacteriemia to fulminant catastrophic events(e.g., sepsis, shock, and death) within a few hours after onset of symptoms. Complement deficiencies, either congenital or acqired, increase the risk for invasive meningococcal disease. Since C3 plays a critical role in the complement cascade, congenital C3 deficiency or conditions that decrease C3(e.g., systemic lupus erythematosus, cirrhosis, nephritis, C3 nephritic factor) increase the risk for invasive disease due to pyogenic bacteria including N. meningitidis. We had experienced a case of meningococcemia and meningococcal meningitis presenting with mild fever, petechiae, and purpura. The patient was a 7-year old male. He had mild fever, vomiting, headache, nuchal rigidity, petechiae and purpura on both lower extremities, which spreaded to the whole body. His blood culture grew Neisseria meningitidis. The diagnosis of meningococcal meningitis was confirmed by examination of cerebrospinal fluid. The clinical symptoms of the illness were improved after treatment of antibiotics(cefotaxime) for 12 days. However the patient had developed generalized edema, microscopic hematuria & proteinuria on the third day after admission. High ASO titer and low serum C3 level were also noted. The microscopic hematuria returned to normal about 2 months after discharge. The C3 level returned to normal range about 3~4 months after discharge. we report a case of combined acute poststreptococcal glomerulonephritis and acute invasive meningococcal disease with reference review.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.110-115
• /
• 2008

Purpose: The objective of this study is to propose an effective management of unstable zygomatic arch fracture. The reduction methods of arch fracture were relatively simple but the maintenance of reduction state is very troublesome. On this, authors introduce an effective management method of unstable zygomatic arch fracture. Methods: Authors experienced 23 cases of unstable segmental zygomatic arch fractures and used Thermo-splint in all cases. All the arch fractures were reduced through Gillies' approach under the general anesthesia. After the reduction, the most effective suspension points were marked on the covering skin of the fractured arch. A needle of heavy nonabsorbable suture material was inserted toward the marking site under the reduced zygomatic arch. And then Therm-splint was dipped in the hot water, and we got the splint pattern of patient face. Reshaped Thermo-splint was trimmed and fixated with previous suspension suture materials. More additive suspension was done if necessary. The splint was applied for in two to three weeks postoperatively. Results: In all the cases, good cosmetic and functional results were observed without severe complications. There were 4 cases of incomplete reductions but they also had no specific problems. There were no facial nerve symptom and scar(stitch mark). Postoperative slight tenderness and trismus were completely subsided after removal of the splint. Conclusion: The Thermo-splint safely protect and maintain the postoperative reduction state. The application, maintenance and removal were easy and simple. It could be reformed to any contour of face and had enough rigidity for supporting. Above all these things, effective prevention of displacement and easy manipulation were significant merit. Authors experienced good results with Thermo-splint, and would introduce it for another method of management of zygomatic arch fracture.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.3
• /
• pp.281-291
• /
• 2010

In this study, a five-story steel frame was designed in accordance with KBC2005 to evaluate the effects of the beam-column connection on the structural behavior. The connections were designed as fully rigid and semi-rigid. The fiber model was used to describe the moment-curvature relationship of the steel beam and the column, the power model for the moment-rotation angle of the semi-rigid connection and the three-parameter model for the hysteretic behavior of the steel beam, column, and connection. The structure was idealized as separate 2-D frames and as connected 2-D frames. The peak ground accelerations of four earthquake records were modified in a time-history analysis for the levels of the mean return period and for the maximum base-shear force in a pushover analysis. The top story displacement, base-shear force, story drift, demanded ductility ratio for the semi-rigid connection, maximum bending moment of the column, beam, and connection, and distribution of the plastic hinge were examined in the time-history analysis. The frame with the semi-rigid connection yielded a lower base-shear force, less magnitude, and increasing ratio in the bending moment of the column, beam, and connection than the frame with a fully rigid connection. The TSD connection was deemed to have secured the economy and safety of the sample structure that was subjected to seismic excitation for the Korean design level.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.169-179
• /
• 1988

In the part 1, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's fall & winter fabrics were measured by KES-F system. Sorts of 90 commercial fabrics for women's fall & winter clothes were classfied into 39 silk and 51 polyester fabrics according to meterials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. Furthermore, there mechanical properties as well as their hand values were discussed in comparison with those values for kimono fabrics. The main results are summarized as follows; 1. The shape of silk fabrics in formation for weared clothes show a box-shaped silhouette. Polyester fabrics has a easy to shape-less and make a silhouette which goes along with the body. 2. Silk fabrics for Korean women's fall & winter clothes have ${\pm}1\sigma$ range of bending, shearing, surface properties and thickness as compared with kimono fabrics. 3. A wrinkle recovery and drapability of silk fabrics for Korean women's fall & winter clothes are inferior to kimono fabrics. On the other hand, the fabrics for Korean women's fall & winter clothes have conical-shaped silhouette based on higher bending rigidity. 4. Except for flexibility with soft feeling, a primary factor of mechanical properties contributes to the hand values of fabrics for Korean women's fall & winter clothes having no concern with materials were same as the women's summer fabrics. 5. As for the hand values of fabrics for Korean folk clothes, stiffness, anti-drape stiffness are larger than those of kimono fabric and stiffness, anti-drape stiffness, crispness of fabrics for Korean women's fall & winter clothes have smaller values as compared with Korean women's summer fabrics.

• Health Policy and Management
• /
• v.10 no.3
• /
• pp.108-128
• /
• 2000

The Korean government has implemented the policy for merging 141 health insurers into Korean Unified Health Insurer (KUHI) in July of 2000. The unification of multiple insurers will definitely effect the stability of financial management, equity of premium burdens and efficiency of administrative management. However, it is difficult to predict what forms the far-reaching effects of the unification would take. Thus, pursuing the unification may be express as a huge policy experiment. In order to lead the unification, which lies on a crossroad between success and failure, to the road of success, we need to infer the problems and obstacles predicted in the step-wise processes of merging organizations, finances and the systems of computing premium, and come up with the effective means to maintain the stability of financial management, to improve the equity of premium burdens and to increase the efficiency of administrative management. Thus, I first described the changes of the Korean medical insurance system, and analyzed the performances of self-employed medical insurance 1 year after the integration of societies in October of 1998. At the base of examining the stability of financial management, equity of premium burdens and efficiency of administrative management, I predicted the problems and obstacles that could occur after the unification of the multiple medical insurers, and proposed a few ways of leading the unification of the multiple medical insurers in Korea to success. The most worried factor is that insurance finance would become unstable since the expansion of premium revenues is not easy because raising the premium for all Koreans is to be difficult. In addition, the unification of insurance finance could weaken the insurer's efforts for declaring real incomes of the self-employed and increasing the collection rate of premiums from them. This weakening would be the decisive factor of lowering the equity of premium contributions between the self-employed and employees. And bureaucratization and rigidity that are unavoidable in a gigantic unified organization could lower the efficiency of administrative management. Furthermore, by having 3 labor unions in the unified organization, it is possible to experience frequent difficulties and discords among the unions and between the unions and organization. Thus, when smooth pursuing of the unification of multiple insurers gets difficult, the social expenses derived from the failure would eventually end up on all Koreans. The unification is to be performed after coming up with the ways to eradicate these worries, so that the unification of multiple insurers would step onto the road of success.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.119-127
• /
• 2014

The application of sulfur polymer emulsion (SPE) as an acrylate substitute for semi-rigid pavement grout was evaluated, and the performance improvement by employing PVA fibers were also evaluated. The result indicated that the filling ratio of semi-rigid pavement material decreased as the fiber content increased, but it was measured to be 92~94% in every mixing condition, which satisfies the target performance, 90%. The maximum Marshall stability value of semi-rigid pavement material was measured to be 25.4 kN, which is about 4.7 times higher than the Korean Standard required for semi-rigid pavement material, 5.0 kN. The dynamic stability evaluation of semi-rigid pavement material indicated that the resistance to deformation from the wheel tracking test was improved by an SPE substitution, and in every mixing condition, the deformation converged to a constant value after 45 minutes with the same dynamic stability of 31,500 times/mm. The strain at the flexural failure was about 0.53%, which shows superior rigidity to asphalt pavements. The examination of abrasion resistance and impact resistance showed that the loss ratio was 9.8~6.0% in every mixing condition, which indicates a good abrasion resistance. Also, when fiber content ratio was 0.3%, the impact resistance was 2.82 times higher compared to plain (i.e., when fibers were not added). In the limited range of this study, an SPE substitution ratio of 30% was found to be an optimal level considering the mechanical and durability performance. In addition, it is thought that semi-rigid pavement material with superior performance could be manufactured if fiber content ratio up to 0.3% is applied depending on the purpose of use.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.22-32
• /
• 2014

Durability is one of the most important and attractive subjects in concrete research field because not only durability of concrete is reduced by various degradation factors but also its reduction adversely influences the structural performance and service life of concrete structure. For this reason, a considerable amount of papers associated with concrete durability have been published and those researches were mainly focused on the changes of intrinsic properties of concrete due to chemicophysical degradations. However, the relationship between durability of concrete and structural behavior of concrete member has not been well established yet. In this study, calcium leaching degradation, a cause of concrete strength reduction, was dealt with. The experiments of compressive and flexural behavior of degraded concrete member were performed to evaluate the characteristics of structural behavior according to degradation level. Finally, the results from the experiments were compared with those obtained from nonlinear FEM analysis. The results from this study clearly showed that leaching degradation leads to decrease in compressive strength and compressive behavior evolves from brittle to ductile failure pattern during the degradation process. Load capacity and flexible rigidity of the degraded RC member decreased when the degradation level increased, in compressive zone. Additionally, it was found that the values from nonlinear FEM analysis, CDP model in ABAQUS, coincided well with the experimental results.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.87-94
• /
• 2002

Recently, there have been numerous attempts to expand the traditional temporary soil nailing system into a permanent wall. Two reasons for this include the soil nailed system's advantage of efficient and economic use of subgrade space and its ability to decrease the total construction cost. However, the systematic and logical design approach has not been proposed yet. The permanent soil nailing wall system, which utilizes precast concrete from soil nailing system, is already used in many countries, but the study of cast-in-place concrete lacing or rigid walls in bottom-up construction of traditional soil nailing walls is imperfect and insufficient. In this paper, various laboratory model tests have been carried out to investigate the influence of parameters, including stiffness of the rigid wall to the soil nailing structure with respect to failure mode, displacement patterns and tensile forces at the nail head in several levels of load. Then, the variation of earth pressure distribution on the soil nailing wall, built with a rigid front plate, is sought through different levels of surcharge load and tensile forces at the nail head.

• Korean Journal of Optics and Photonics
• /
• v.22 no.4
• /
• pp.184-190
• /
• 2011

A compact imaging spectrometer (COMIS) was developed for a microsatellite STSAT-3. The satellite is now rescheduled to be launched into a low sun-synchronous Earth orbit (~700 km) by the end of 2012. Its main operational goal is the imaging of the Earth's surface and atmosphere with ground sampling distance of 27 m and 2 - 15 nm spectral resolution over visible and near infrared spectrum (0.4 - 1.05 ${\mu}m$). A flight model of COMIS was developed following an engineering model that had successfully demonstrated hyperspectral imaging capability and structural rigidity. In this paper we report the environmental test results of the flight model. The mechanical stiffness of the model was confirmed by a small shift of the natural frequency i.e., < 1% over 10 gRMS random vibration test. Electrical functions of the model were also tested without showing any anomalies during and after vacuum thermal cycling test with < $10^{-5}$ torr and $-30^{\circ}C\;-\;35^{\circ}C$. The imaging capability of the model, represented by a modulation transfer function (MTF) value at the Nyquist frequency, was also kept unvaried after all those environmental tests.

• Journal of Sasang Constitutional Medicine
• /
• v.16 no.3
• /
• pp.34-45
• /
• 2004

1. Objectives The purpose of this study is to investigate constitutional ordinary and pathological symptoms differences among each constitutional groups of stroke in-patients. 2. Methods 101 stroke in-patients(Soyangin(SY) $n^{a)}=52$, Taeumin(TE) n=39, Soeumin(SE) n=10) hospitalized at Kyung-Hee Oriental medical center from Nov. 2003 to Sept. 2004 were investigated through questionnaire which consists of 18 parts, 289 questions(156 questions concerned ordinary symptoms and 133 pathological symptoms). The answers were analyzed statistically in order to find the questions which represent the significant differences among each constitutional groups. ( a) number of patients) 3. Results As for the ordinary symptoms, majority of the Soyangin group replied that they experienced "frequent dreams during sleep" and "scarce constipation". Majority of the Taeumin group affirmed to "dark redness of face", "dry nose", "low intolerance of heat", "good appetite and digestion", and "frequent overeating experiences". Majority of the Soeumin group affirmed to "pale face", "insomnia", "frequent constipation", "poor appetite and digestion", "small amount of diet", "slow eating", "fond of warm or hot water", and "easily tired(especially after sweating)". As for the pathological symptoms, majority of the Taeumin group affirmed to "frequent optic fatigue", "frequent tinnitus", "frequent bitter mouth", "fond of cold water", "flatulent", "stuffiness in the navel area", "irregular stool habits", "frequent constipation", "large amount of sweat", and "frequent rigidity of neck". Majority of the Soeumin group affirmed to "bad appetite", "fond of warm or hot water", "drink small amount of water", "sensitive during sleep" and "frequent heavy head". 4. Conclusions Through this study, We found statistically significant questions distinguishing the characteristics of each constitutional group.