• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.213-217
• /
• 1994

The attitude stability of a satellite in spin-stabilized injection mode which contains a liquid pool is investigated. The satellite model for investigation is a two-body system consisting of a the main body, which is symmetric and rigid, representing the spacecraft, and a spherical pendulum, representing the liquid pool. Assuming that both spacecraft and pendulum are in states of steady spin about the symmetry axis of the spacecraft, the coupled nonlinear equations of motion for the system are simplified. In this paper, by using the multiple scales method, the possible resonance conditions in terms of the system parameters are determined and the corresponding near-resonant solutions are derived.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.251-266
• /
• 2004

We consider a controlled nonlinear mechanical system described by the Lagrange equations. We determine the control forces $Q_1$ and the restrictions for the perturbations $Q_2$ acting on the mechanical system which allow to guarantee the asymptotic stability of the program motion of the system. We solve the problem of stabilization by the direct Lyapunov's method and the method of limiting functions and systems. In this case we can use the Lyapunov's functions having nonpositive derivatives. The following examples are considered: stabilization of program motions of mathematical pendulum with moving point of suspension and stabilization of program motions of rigid body with fixed point.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.102-107
• /
• 1986

This paper presents a new idea to obtain moment of inertia values of an arbitrary shape body by applying inverse modal transformation technique. A multiaxes inertia pendulum apparatus was designed to measure 6 rigid body modes of a test body. A software was developed to calculate inertia properties as well as the location of center of gravity and total mass of the test body from the measured modal data. The developed method was applied to a simple body of which the inertia properties are known then the obtained values were compared with the known values.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.322-331
• /
• 2008

In order to synthesize high-solid coatings, acrylic resins (HSAs) containing 90% solid content were first synthesized, then the synthesized HSAs were cured with a curing agent, isocyanate, at room temperature to obtain high-solid coatings. In the HSAs synthesis, conversion was in a range of $82{\sim}87%$, and viscosities and number-averaged molecular weight ($M_n$) of the HSAs were in a range of $4380{\sim}8010$ cP and $1540{\sim}1660$, respectively. From the correlation between $T_g$ value, viscosity and $M_n$, it was found that, with increasing $T_g$ value, viscosity increases rapidly and molecular weight increases slowly. From the visco-elasity measured by the pendulum method, it was found that the curing time decreased with increasing $T_g$ values. From the tests of physical properties of the coatings' film, $60^{\circ}$ specular gloss, impact resistance and heat resistance were proved to be good and pencil hardness, drying time and pot-life were proved to be poor.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.116-122
• /
• 2005

Room temperature cure type of acryl-urethane coatings with high solid content were prepared in this study. Acrylic resins with 80% solid content were cured with hexamethylene diisocyanate (Desmodure N-3600). The cure time of prepared coatings BEHCC-84 (BEHC-84 : $T_g=0^{\circ}C$) and BEHCC-87 (BEHC-87 : $T_g=30^{\circ}C$), measured by rigid-body pendulum method, was recorded 8.3 hours and 3.8 hours, respectively. Dynamic viscoelastic experiment also revealed the glass transition temperature of BEHCC-84 and BEHCC-87 to be $T_g=40.3^{\circ}C$ and $T_g=43.3^{\circ}C$, respectively. It was found that the adhesion and flexural properties among various propeties of coatings were enhanced by the incorporation of caprolactone acrylate monomer into the acrylic resins.

• 폴리머
• /
• 제28권3호
• /
• pp.273-280
• /
• 2004

고형분 80%인 아크릴수지 (에틸 메타크릴레이트-2-히드록시프로필 메타크릴레이트-노르말부틸 아크릴레이트-아크릴산 : EHBC)를 합성한 후 이를 헥사메틸렌 디이소시아네이트-뷰렛 경화제로서 상온경화시켜 고 고형분 도료 (에틸 메타크릴레이트-2-히드록시프로필 메타크릴레이트-노르말부틸 아크릴레이트-아즈릴산/헥사메틸렌 디이소시아네이트-뷰렛 : EHBCN)를 제조하였다. 진동자법에 의한 점탄성 측정에서 제조된 도료인 EHBCN-4 (EHBC-4 정적 $T_{g}$ $0^{\circ}C$)와 EHBCN-7 (EHBC-7 : 정적 $T_{g}$ 3$0^{\circ}C$)의 경화시간은 6.2시간과 4.5시간으로, 또한 경화된 도막의 동적 $T_{g}$ 는 $14^{\circ}C$ 와 $39^{\circ}C$로 각각 나타났다. 도막 물성 중 접착력과 굴곡성은 카프로락톤 아크릴레이트 단량체 성분이 함유된 EHBCN쪽의 물성이 현저히 좋게 나타나, 카프로락톤 아크릴레이트 성분이 접착력과 굴곡성을 증진시켰음이 입증되었다.