• 해양환경안전학회지
• /
• 제19권1호
• /
• pp.37-44
• /
• 2013

본 연구는 다양한 기상변화에 따른 안전을 확보하기 위한 해상에서의 플로팅 플랫폼의 연결에 대하여 연구하였다. 본 연구의 목적은 다양한 해상변화가 일어나는 연안역에 설치되는 플로팅 구조물에 관한 문헌 조사를 실시한 후, 콘크리트 구조물 연결하는 모델을 제시하는 것이다. 본 연구에서는 플로팅 구조의 개념, 기존의 모델, 설계적 평가를 포함한 콘크리트 구조물 기반 플로팅 플랫폼을 기술하였고, Rigid Pontoon Connector를 국내 연안역에 적합한 모델로 제안하였다. 연구의 결과로서, 리기드 폰툰 커넥터 디자인은 (Rigid Pontoon Connector) 안정적으로 플로팅 플랫폼의 연결을 구축할 수 있는 매우 효율적이고 실용적인 솔루션으로 분석되었다.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.85-99
• /
• 1996

Finite element models were constructed to analyze the mechanical behavior of a three unit fixed partial denture (FPD) with a 2nd premolar and 2nd molar abutment either employing a rigid and nonrigid connector. Gap elements were used to model the clearance space of the nonrigid connector. 1. High stress was generated in the FPD and supporting abutment around the rigid connector. 2. The pattern of stress and deflection is very similar between vertically and 20 degree mesially tilted nonrigid connector at the distal aspect of premolar abutment. 3. FPD with an inverted nonrigid connectors exhibited the worst undesirable mechanical stress states and deformations. 4. Nonrigid connector of normal orientation transmit the load to the abutment tooth, but inverted connector doesn't transmit the force.

• Ocean Systems Engineering
• /
• 제14권3호
• /
• pp.277-299
• /
• 2024

In this study, the wave-induced motion responses of modular floating structures (MFS) was investigated through a series of experiments in a two-dimensional wave tank. A 1:63 scale model test was conducted using a 1-by-2 modular floating structure consisting of two modules and connectors. Two different types of connectors were considered: a pitch-free hinge and rigid connector. The numerical analysis was performed based on the higher-order boundary element method (HOBEM) and wave Green function with potential flow theory. First, the heave and pitch RAOs of the modules from the regular wave tests were directly compared with numerical analysis results. Next, the motion spectra and their statistical values from the irregular wave tests were compared with the numerical analysis results. The study revealed that the sheltering effect of the weather side module led to a reduction in motion of the lee side module. The numerical analysis showed good agreement with the experimental data, demonstrating the validity of the numerical method. Additionally, the rigid connector, which strongly constrain all six degrees of freedom, significantly reduce pitch motion, making the modules behave as a single rigid body.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.120-147
• /
• 1994

저자는 가공의치에서 임플란트와 치아간의 보철물 연결형태와 나사형 및 원통형 임플란트에서 그 형태의 차이가 주위 골조직의 응력분산에 어떤 영향을 미치는지 알아보기 위해 임플란트와 지대치를 고정성 및 반고정 성 가공의 치로 연결하고 수평면에 대해 수직 및 25도 측방하중을 가하여 주위 골조직의 응력분산 양상을 3차원적 광탄성 실험을 통해 비교 분석한 바 다음과 같은 결론을 얻었다. 1) 나사형 임플란트에서는 수직 및 측방력에 대해 경부에 응력집중이 나타났다. 2) 나사형 임플란트와 치아를 가공의치로 연결했을 경우에는 임플란트의 경부와 지대치의 치경부 및 근단부에 응력집중이 나타났으며, 고정성 가공의치로 연결했을 때에는 지대치의 치경부에 반고정성 가공의치로 연결했을 때에는 임플란트 경부에 더 큰 응력집중이 나타났다. 3) 원통형 임플란트와 치아를 가공의치로 연결했을 경우에는 임플란트와 지대치의 근단부에 응력집중이 나타났으며, 고정성 가공의치로 연결했을 때에는 지대치의 근단부에 반고정성 가공의치로 연결했을 때에는 임플란트와 지대치의 경부에 더 큰 응력집중이 나타났다. 4) 임플란트와 치아를 가공의치로 연결했을 경우에는 고정성 및 반고정성 가공의치 양쪽 모두에서 원통형 임플란트보다 나사형 임플란트에서 지대치 주위의 응력분산이 더 균등하게 나타났다. 5) 나사형 임플란트 주위의 응력분산은 임플란트 두 개를 고정성 가공의치로 연결했을 때, 가장 균등한 것으로 나타났으며, 그 다음이 치아와 고정성 가공의치로 연결했을 때, 그 다음이 치아와 반고정성 가공의치로 연결했을 때, 그리고 임플란트 단독으로 사용했을 때 가장 불리한 것으로 나타났다.TEX>$45.4{\pm}16.6m$, Panavia는 $41.3{\pm}22.9m$, 그리고 All-Bond는 $151{\pm}82m$로 나타났다. 4. 인산 아연 세멘트와 Panavia는 All-Bond에 대해 통계학적 유의성 있는 차이를 나타내었으며(p<0.05)인산 아연 세멘트와 Panavia-EX사이에는 유의성 있는 차이가 없었다(p>0.05). 비교시 All-Bond & composite resin cement 군이 Z.P.C. 군보다 높게 나타났으나 통계학적 유의성은 없었다(P>0.05).않거나 더 적게 쓰고도 농사를 지을 수 있는 영농법 및 농약을 좀 더 안전하게 살포할 수 있는 방법의 개발, 고온에서도 착용하기 좋고 보호 성능이 좋은 보호구의 개발이 시급히 요구되며, 농약살포시 환기요령과 보호구 착용방법에 대한 교육 등의 강화도 고려되어야 할 것으로 생각된다. 둘째, 농부증 증상 중 흔한 증상들은 농작업 자세 및 과도한 노동에 기인되었을 가능성이 있으므로 신체에 부담을 줄일 수 있는 농기구를 개발하고, 주기적인 휴식 및 운동을 권장해 볼 만하다. 세째, 고혈압 유소견율이 15% 전후로 높으므로 고혈압 관리사업의 강화가 요구된다.는 의료분쟁을 줄일 수 있는 방안이 마련되어야 하고, 의료보험수가의 조정도 필요할 것이다.보호차원에서 정부의 중립적 의지가 있어야 할 것으로 생각된다.의 비율이 감소하였으나 본태성고혈압, 당뇨병, 폐결핵, 협심증 둥의 비율이 증가하였다. 일반외과의 경우에는 치핵, 항문열상, 종기 등의 비율이 감소하였고, 위암, 대장암, 담낭암 등의 비율은 증가하였다.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.445-456
• /
• 1992

제 2소구치를 중간지대치로 하고 고정성 및 비고정성 연결장치를 갖는 5unit 가공의치에 의해 발생하는 역학 현상을 규명하기 위하여 이차원 유한요소 모형을 제작하였다. 비고정성 연결장치의 간극을 부여하기 위하여 gap element를 사용하였다. 연결장치의 종류나 치조골의 흡수 정도에 상관없이 모든 가공의치는 치근막 내에 발생되는 응력을 감소시키는 역할을 하였다. 그중에서 고정성 연결장치를 갖는 가공의치에서 치근막 내에 가장 작은 응력이 발생하였다. 대구치의 근심면에 비고정성 연결장치를 갖는 가공의치가 역학적 응력과 변위의 관점에서 바람직하지 않았다.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.55-69
• /
• 1987

The purpose of this study was to evaluate the stress distributions of the fixed partial denture with five unit intermediate abutment. This fixed partial denture was attached to a three dimensional photoelastic epoxy resin model. Three dimensional photoelastic models were used, with the stress areas recorded photographically. A vertical load was applied to the second molar, which is the most posterior abutment of the fixed partial denture. Similarly, a vertical load was applied to the first molar because this tooth receives the heaviest masticatory load. These loads were added to two types of fixed partial denture. the rigid connector, and the nonrigid connector which was connected on the distal side of the intermediate abutment by a key and keyway device. After the stress patterns in surrounding tissues were observed, the following conclusions were as follows: 1. When the vertical load was applied to the first and second molars on the occlusal surfaces, the surrounding tissues of the roots of the canine, the second premolar, and the second molar were all compressive stresses. 2. When the vertical load was applied on the occlusal surface of the second molar, the tissue surrounding the roots of the canine, the second premolar, and the second molar all showed more stresses with the nonrigid connector than with the rigid connector. 3. When the vertical load was applied to the occlusal surface of the first molar, the stress concentration on the canine and the second molar was similar, whether the rigid or nonrigic connectors were used. However, on the second premolar, the stress concentration shown by the nonrigid connector was noticeably more than that shown by the rigid connector. 4. Whether the rigid or nonrigid connectors were used, when the load was placed on the first molar, the stress concentration on the canine and the second premolar was greater than that observed for the second molar. When the load was placed on the second molar, the load affected the second molar more than the canine and the second premolar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1091-1096
• /
• 2001

Generally, in a steel girder and the concrete slab act as a composite structure, the connectors must have adequate strength and stiffness. If there are no horizontal or vertical separations at the interface, the connectors are described as rigid, and complete interaction can be said to exist under these idealized circumstances. In previous study, it was considered that the strength of stud is affected by the stud diameter, height of stud and compressive strength of concrete. The differences between previous study and this study are variables, which are shank diameter of shear connector, the spacing of shear connector, the size of specimen and the row of shear connector. So this paper, as a study on the strength of shear connector with the spacing of shear connector, size of specimen (block-out size), row of shear connector and shank diameter of shear connector resulted from the push-out specimen are conducted with ABAQUS program. It is to investigate the effects of characteristics of these factors. The load-slip relations obtained from the experiments are compared with those of analyses. From these results, the trends of stress are stress estimated and compared with push-out test.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.91-99
• /
• 2003

The purpose of this study is to analyze the characteristics of the connector having an influence on the elasto-plastic buckling load of ball-jointed single layer latticed domes. As an analytic model, domes are composed of tubular member elements, balls and connectors. The joint system of members in single layer latticed domes has influence on the buckling load. Therefore, in this paper, the variation of the elasto-plastic buckling load by effects of the connectors characteristics is analyzed. The structural behavior of the connector is investigated by following points: (1) the length of rigid zone, (2) looseness of screw and (3) the diameter of connector. In addition, the elasto-plastic buckling analysis is carried out through the variation of the connectors section of yielding part, and then the buckling mode of the dome is examined. As a result, it is emphasized that the characteristics of the connector have significant effects on the buckling load of latticed domes.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.447-459
• /
• 1993

A two dimensional finite element model was constructed to analyze the mechanical behavior of four unit fixed partial dentures (FPD) with a 2nd premolar abutment either employing a rigid or nonrigid connector and a 2nd molar abutment(Branemark implant, IMZ implants and natural tooth). Gap elements were used to model the clearance space of the nonrigid connectors and each components of implants. All FPDs with a implant abutment alter the patterns of stress distribution and displacement, but the magnitude of stress in the periodontium was not greater than that of the control. A FPD with rigid connectors induced the smaller stresses in the periodontium than a FPD with a nonrigid connector. A FPD with a Branemark implant exhibited the more desirable mechanical stress states as compared to the IMZ implants with IME or IMC.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.431-443
• /
• 2007

Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.