• Journal of the Korean Geophysical Society
• /
• v.7 no.3
• /
• pp.225-232
• /
• 2004

To investigate the depositional environment and the geological structure of the Jeju Basin in the South Sea of Korea, we acquired 54-channel seismic data of about 1,980 line-km. The study area lies at the northeastern part of the East China Sea Trough, a Tertiary back-arc basin. The sedimentary basin formed by rifted activities resulted in the formation of graben and/or half-graben structures. The basin is composed of pre-rift, syn-rift and post-rift sediments bounded by regional unconformity. The pre-rift and syn-rift sediments consist of Oligocene, Early and Middle Miocene sequence, whereas the post-rift sediments consist of Late Miocene and Plio-Pleistocene sequences. Seismic and well data from the Jeju Basin indicate that Oligocene-Miocene sediments were deposited under fluvial and lacustrine depositional conditions. Following compressional tectonic movements in the Late Miocene time and a subsequent period of erosion, regional subsidence during the Pliocene time brought the Jeju Basin under marine conditions, resulting in the deposition of dominantly marine sediments.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.189-197
• /
• 2006

The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.53-62
• /
• 2008

Seismic interpretation was carried out based on biostratigraphy of Fukue-1 well in Japan side of the Domi Basin and compared with the Cheju Basin and Tertiary basins in north-west Kyushu. East China Sea Basin including Domi Basin began to develope in the latest Cretaceous$\sim$Paleocene related to rifting. The basin was filled with a thick package of syn-rift sediments during Paleocene to Oligocene and was under post-rift stage effected by transtenssion during Miocene. Previous studies suggest that the basin had been mostly filled with Miocene formation (>3 km), but the Miocene formation is interpreted to be comparatively thin in this study. The thickness of the Miocene formation varies from tens of meters to hundreds of meters and become thicker to the south-west of Cheju Basin. The index taxa of the Oligocene$\sim$Eocene nannofossils and dinoflagellates found in the Cheju Basin and Tertiary basins in north-west Kyushu also corroborate the result of this study.

• Journal of the Korean Geophysical Society
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2004

Gravity, magnetic and high-resolution seismic surveys were carried out in the Powell Basin to examine tectonic structure and recent sedimentation on Dec. 2002. The trend of negative gravity anomalies along the spreading axis of the Powell Basin changes from northwest to east-west toward south. Both boundaries of the basin with the Antarctic Peninsula and the South Orkey micro-continent show negative magnetic anomalies, which indicates that the boundaries were continental rift areas in the initial stage of spreading. Magnitude of the magnetic anomalies corresponding to the axis of the basin is rather small compared to those of normal spreading axises in other regions. Such small anomalies would be caused by reduction of magnetic strength of oceanic crust below thick sediments due to thermal alternation. High-resolution (3.5 kHz) seismic profiles reveal that top of the South Scotia Ridge is a flat terrain coverd with thin coarse sediments by glacial erosion. Thick oceanic sediments are deposited in the central part of the basin. Little deformation in the oceanic sediments indicates that the Powell Basin has been in stable tectonic environment after spreading of the basin stopped.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

The Okinawa Trough is a rift basin formed by extension. Analysis of multichannel seismic reflection profiles from the northwestern margin of the northern Okinawa Trough reveal that the trough is characterized by a series of tilted fault blocks bounded by listric normal faults and half-grabens developed between blocks, showing typical rifted structures. The trough display three kinds of sedimentary sequences with different seismic reflection characteristics: prerift, synrift and postrift sediments. The prerift sequence develops parallel to the dip direction of tilted fault blocks. The synrift sediments, mostly deposited in the half-grabens between tilted fault blocks, are generally well characterized by divergence of the reflectors towards the blocks indicating contemporaneous deposition during tilting. The postrift sediments are featured by continuous and parallel reflectors. The width of the half-graben and the throw-displacement rate of the basin bounding fault are closely connected. The throw-displacement rate is the maximum when the rifting event is the most active and the width of the half-graben is proportional to the rate.

• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.33-47
• /
• 2020

The bulk and partition geochemistry was studied in two sediment cores collected from the axial valley of the north-central Fonualei Rift and Spreading Center (FRSC), Lau back-arc Basin, southwest Pacific. The sediments consist of mostly volcanic ash, although minor amounts of biogenic and other components were present in some intervals. The major element composition of bulk sediments recalculated to a carbonate-free basis was in good agreement with the magma compositions of the adjacent Tofua Arc and the FRSC, with only significant difference in Mn content. The enrichment of Mn and other associated elements (e.g. Cu, Co, Ni, and P) is attributed to hydrothermal input to the sediments, as evidenced by their significant partitioning in the non-detrital phases according to the partition geochemistry. Hydrogenetic and diagenetic inputs were assessed to be relatively insignificant. Estimated hydrothermal Mn fluxes during the Holocene ranged between 5.0 and 37.1 mg cm^-2 kyr^-1, with the higher values in younger sediments, suggesting enhanced hydrothermal activity. The hydrothermal Mn fluxes comparable to or higher than those reported from other spreading centers with strong hydrothermal activities may indicate the presence of unknown hydrothermal vent sites and/or topographic restriction on the dispersal of hydrothermal plumes in the northern part of the FRSC.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.235-253
• /
• 2006

We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the Korean margin leading to the separation of the Japan Arc. The Korean margin is rimmed by fundamental elements of rift architecture comprizing a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. In the northern part, rifting occurred in the Korea Plateau, a continental fragment extended and partially segmented from the Korean Peninsula, that provided a relatively broader zone of extension resulting in a number of rifts. Two distinguished rift basins (Onnuri and Bandal Basins) in the Korea Plateau we bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. In contrast, the southern margin is engraved along its length with a single narrow rift basin (Hupo Basin) that is an elongated asymmetric half-graben. Rifting at the Korean margin was primarily controlled by normal faulting resulting from extension in the west and southeast directions orthogonal to the inferred line of breakup along the base of the slope rather than strike-slip deformation. Although rifting involved no significant volcanism, the inception of sea floor spreading documents a pronounced volcanic phase which seems to reflect slab-induced asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin can be explained by the processes occurring at the passive continental margin with magmatism intensified by asthenospheric upwelling in a back-arc setting.

• The Korean Journal of Petroleum Geology
• /
• v.9 no.1_2 s.10
• /
• pp.16-23
• /
• 2001

The study area in the East Sea is located on the northeastern margins of the Ulleung Basin near the Kita-Yamato Bank. The research area provides the important clue to the development of Miocene basins which are characterized by the normal faults and volcanic activities related to rifting in the continental crust. Kita-Yamato Bank is a small sediment-filled graben which was formed by failed rifting in the Early Miocene. The basins rapidly vary the bathymetry, depth of acoustic basement and thickness of sedimentary layer. The tension in the study area caused the extensional lithospheric deformation before/during the Early Miocene. In consequence, tectonic forces resulted in the depression or subsidence of basement from continental rifting in the Kita-Yamato Bank followed by the opening of the Ulleung Basin, and caused the onset of graben or half-graben structure bounded by large blocked syn-rift faults. Afterward no significant tectonic deformation exists, with the consequence that post-rift normal faults with small heave were formed and reactivated by the resultant forces such as tectonic subsidence, sediment loading and volcanic activity. The Cenozoic sediment layer has a maximum thickness of 1.0 s along the center of the graben or half-graben, which overlies the consolidated acoustic basement. Seismic units V and IV supposed to be syn-rift sedimentary rocks are deformed by both the volcanic activities and numerous basement-involved normal faults induced from extension. In the uppermost layer, slump scars resulted from the slope failure are recognized.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.27-35
• /
• 1997

The Gorae II area is located in the southwestern margin of the Ulleung Basin, East Sea and corresponds to the Ulleung Trough. The survey of 3D seismic data in this area was performed to delineate the structural leads confirmed by the previous 2D seismic data. As a part of 3D interpretation, basement related structural movements and their relationship with the stratigraphy were studied. The study shows that eight sequences were identified which are genetically related to the tectonics and sediment supply in this area. The geologic structures characterizing the study area consist of : (1) block faults developed in the early stage of basin opening, (2) late Miocene thrusts, and (3) Pliocene wrench faults. The eight sequences consist of pre-rift (acoustic basement), syn-rift (Sequence $A_1, A_2$), post-rift (Sequence $B_1{\~}B_3$), syn-compressional sequence (Sequence C), and post-compressional sequence(Sequence D) from oldest to youngest. The time structure and isochron maps were constructed for each sequence and also used in seismic facies analysis and interpretation of sedimentary environment. The interpretation results reveal that the relative sea level changes caused by several stages of tectonic movements and sediment supply control the stratal and structural geometry of Ulleung basin.

• 한국석유지질학회:학술대회논문집
• /
• spring
• /
• pp.38-41
• /
• 1998