• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.312-312
• /
• 2017

The study was conducted to select optimal materials for promoting germination rate, high sprouting vigor by priming treatment using PEG 6000 (water potential -0.5 to 2.0 Mpa) and Azolla extracts (0.1, 1.0, and 10.0%) extracted by ethanol, distilled, and/or hot water in colored rice cultivars. Each rice seed (three black rice cultivars and two red rice cultivars) was soaked 24 and 48 hr including untreated control. In black rice, Joseongheugchal rice cultivar, azolla ethanol extract (0.1%) induced highest germination rate, germination speed was taken to 5 days in distilled water and to 3days in Azolla extracts extracted hot water. Otherwise, degree of bacterial inhibition (number of colony, $10^3cfu$) in dry seed, water soaking for 24hr, soaking with fungicide for 24hr and 48hr, soaking with fungicide and aeration for 24hr and 48 hr was 22, 500, 95, and 0.46, respectively. In order to minimize fungal inhibition, a method can be chosen to combination of soaking fungicide and aeration for 48 hr. In seed priming treatments using growth pouch, seed soaking with fungicide did not affect change of germination percentage and germination speed, it delayed only 2 or 4day in the Joseongheugchal rice cultivar. It differs from rice cultivars and priming materials, Azolla extract(0.1 to 1%) promotes seed germination percentage in the Ilpum, Hongjinju, and Joseonghuegchal, in addition, germination in Jeogjinju cultivar was only promoted by PEG solution(10 to 20%), otherwise, it showed much lower or inhibited on the germination in Heugjinju and Sinmyungheugchal rice cultivars. In a paddy field trial, seedling establishment rate by applying PEG6000 and azolla extract did not show significantly statistical difference. When it compared with untreated control, seedling establishment rate was increased over 50% in priming treatments. Interestingly, seedling establishment rate under azolla extract (0.1%) extracted with ethanol was promoted over 2.5 times compared to the control in a black rice, Joseongheugchal and red rice, Jeogjinju.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.31-36
• /
• 2008

This study was carried out to clarify the effect of silicate application on rice grain quality and storage characteristics in Ilpumbyeo cultivar. In yield and yield components, panicles and spikelet numbers were increased and ripened grain rate was also increased by 2%. Head rice yield was increased by $7.7{\sim}9.5%$ in silicate application. Protein content of milled rice was reduced by $0.2{\sim}0.3%$ and head rice rate was increased by $2.9{\sim}6.7%$ in silicate application due to decrease of chalky and damaged rice rate. In milling characteristics, color separation rate was improved by $4.2{\sim}7.2%$ and colored rice rate was decreased by $5.5{\sim}16.6%$ in silicate application. Acid value of stored brown rice were increased slowly in low temperature and silicate application, but that in room temperature and no silicate application was increased remarkably. The best degree rate of stored brown rice (over than 7.5 of pH) measured by the pH of grain was increased by the silicate application in both low and room temperature. Therefore, it was suggested that the storage characteristics of rice grain was improved by the silicate application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.527-533
• /
• 2003

This experiment was conducted in 2001 to investigate the effect of four nitrogen levels (0, 5.5, 11, 16.5kg/10a) on the yield and quality of vice especially with respect to eating quality. One early-maturing variety (Daejinbyeo) and two mid-late-maturing varieties (Ilpumbyeo and Chucheongbyeo) were used in this experiment. Rice yields of all varieties were increased by the higher rate of nitrogen application, mainly due to a larger number of panicles per m2. Head rice ratio was reduced significantly with an increased rate of nitrogen, while immature vice ratio was increased significantly. Increasing the nitrogen application rate, a considerable increase of protein content was found in all tested rice varieties. Palatability value of Daejinbyeo and Ilpumbyeo measured by rice taster was not affected by nitrogen application rate ranging from 0 to 11 kg/10a, but it was decreased significantly at the rate of 16.5kg/10a. In contrast, the palatability value of Chucheongbyeo was decreased significantly by increasing nitrogen application at the whole application rate. A positive correlation was found between nitrogen application rate and protein content (r=$0.88^{**}\textrm{-}0.96^{**}$), but head rice (r=$-0.84^{**}$~$-0.91^{**}$) and palatability value (r=$-0.72^{**}$~$-0.85^{**}$) showed a negative correlation with the nitrogen application rate. Regardless of the fact that eleven aroma-active volatile compounds were detected in cooked vice of Chucheongbyeo, it was concluded that the aroma-active volatile compounds of cooked rice was not affected by the different nitrogen application rate. The results of this study showed that the standard nitrogen fertilization rate of 11kg/10a could be appropriate considering both rice yield and palatability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.112-121
• /
• 2007

Grain filling is a crucial factor that determines grain yield in crops since it is the final process directly associated with crops' yield performance. Grain filling process can be characterized by the interaction of rate and duration of grain filling. This study was conducted, using 16 temperate japonica rice genotypes, with aims to (1) seek variations in grain filling duration and rate on area basis, (2) compare the contribution of grain filling duration and rate to grain yield, and (3) examine the influence of temperature and solar radiation for effective grain filling on grain yield in relation to grain filling duration and rate. Grain filling rate and duration exhibited highly significant variations in the ranges of $20.7{\sim}46.3\;g\;m^{-2}d^{-1}\;and\;11.2{\sim}35.5$ days, respectively, depending on rice genotypes. Grain yield on unit area basis was associated positively with grain filling duration but negatively with grain filling rate. Grain filling rate and duration were negatively correlated with each other. Final grain weight increased linearly with the rise in both cumulative mean temperature and cumulative solar radiation for effective grain filling. Higher cumulative mean temperature and cumulative solar radiation for effective grain filling were the results of longer grain filling duration, but not necessarily higher daily mean temperature and daily solar radiation for effective grain filling. Grain filling rate demonstrated an increasing tendency with the rise in daily mean temperature for effective grain filling but their relationship was not obviously clear. It was concluded that grain filling duration, which influenced cumulative mean temperature and cumulative solar radiation for effective grain filling, was the main factor that determined grain yield on unit area basis in temperate Japonica rice.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.169-176
• /
• 2013

The price and revenue of rice are expected to decrease due to increasing rice imports, decreasing consumption and the discontinuance of the government's rice procurement. This degenerating profitability is leading to a rise in the cultivation of upland-crops such as beans, fodder crops and fruits in paddy fields. However, there is a lack of research on the selection of rice substitute crops which are adaptable to the relevant region through profitability analysis. This research, therefore, analyzed investment profitability of rice substitute crops for Cheorwon-gun area in Kangwon province. The study applied net present value (NPV) and internal rate of return (IRR), which fit for mutually exclusive investments that make one selection to the exclusion of other crops. Target crops are green house plants in Cheorwon-gun area. Financial analysis showed paprika and cucumber have investment feasibility for automated vinyl greenhouses and conventional plastic greenhouses respectively.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.245-252
• /
• 1998

The structural characteristics of a small scale rice polisher was analyzed to improve its performance. Spraying characteristic of nozzles used for rice polishing was also analyzed by a machine vision system. The internal pressure of the polishing chamber was measured according to outlet resistance, water spraying, and roller shaft speed. In addition, the performance of the rice polisher was evaluated to improve it in the basis of internal pressure in polishing chamber, whiteness, and broken rice ratio of clean rice according to the operating conditions. Actual nozzle discharge rate and drop size were 125 cc/min and 86~97 ${\mu}{\textrm}{m}$, respectively. In the case of water spraying on rices, the internal pressure showed 4.9~9.8N/$\textrm{cm}^2$ increase. broken rice ratio decreased, and there was no difference in whiteness. The internal pressure inueased up to two times with the increase of the outlet resistance. Also, the pressure at the upper part of screen was one and half times as high as the pressure at the lower part. In the case of water spraying rate of 150 cc/min, the roller shaft speed of 850 rpm resulted in no difference in whiteness and decrease of 0.3% in broken rice ratio, comparing to the roller shaft speed of 950 rpm.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.06b
• /
• pp.206-216
• /
• 1998

The structural characteristics of small scale rice polisher was analyzed to improve its performance. Spraying characteristic of nozzles used for rice polishing was also analyzed by a machine vision system. The internal pressure of the polishing chamber was measured according to outlet resistance, water spraying , and roller shaft speed. In addition , the performance of the rice polisher was evaluated to improve it in the basis of internal pressure in polishing chamber, whiteness , and broken rice ratio of clean rice according to the operating conditions. Actual nozzle discharge rate and drop size were 125cc/min and 86.97㎛, respectively. In the case of water spraying on rices, the internal pressure showed 4.9-9.8N/㎠ increase, broken rice ration decreased , and there was no difference in whiteness . The internal pressure increased up to two time with the increase of the outlet resistance. Also, the pressure at the upper part of screen was one and half times as high as the pressure at the lower part. In the case of water spraying rate of 150 cc/min, the roller shaft speed of 850 rpm resulted in no difference in whiteness and decrease of 0.3%in broken rice ratio, comparing to the roller shaft speed of 950 rpm.

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.81-88
• /
• 2000

Every year, 1.1 million tons of rice-hull are produced in South Korea by the by-product in pounding rice. But they has mainly been utilized as a fuel, agricultural compost and moisture proofs. So, it's very valuable to use waste rice-hull for activated carbon manufacture. SiO2 content was the highest among inorganics in rice-hull. Therefore, the SiO2 extraction experiments were carried out under the various conditions of pH 9 to 14, reaction time from 2 to 24 hrs and various temperature of 20 to 100℃. The results showed that increase in pH and temperature enhanced SiO2 extraction from the carbonized rice-hull. The surface area of the carbonized rice-hull indicating activated carbon adsorption capacity was very small as 178∼191 m2/g at first. However, it was increased to 610∼675 m2/g when extracted in alkali solution at 100℃. When the mixing rate of carbonized rice-hull and NaOH was 1:1.5, iodine No. and surface area of activated rice-hull during 10 min at 700℃ were 1,650 mg/g and 1837 m2/g, respectively. Subsequently, an activated carbon with specific surface area of 1,300∼1,900m2/g was manufactured in a short contact time of 10∼30 min with a mixing rate of 1:1.5 in carbonized rice-hull and NaOH, and iodine No. and specific surface area increased as the amount of SiO2 removal increased.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.5
• /
• pp.313-324
• /
• 2022

We investigate the impacts of tariff, tariff-rate quota, conformity assessment, and traceability requirements set by the rice importers using panel data of 17 rice exporters exporting to 119 countries in two years 2015 and 2018, using both Ordinary least square (OLS) and Poisson pseudo maximum likelihood (PPLM) methods. Results from our gravity models strongly indicate that tariff and tariff rate quota remain significantly detrimental to the world's rice exporters because these measures place downward pressure on the rice exporters' prices and the importers' import quantity, creating barriers to market participation. Our study also provides strong evidence about the role of origin certificates in allowing rice exporters to gain access to foreign markets. Meanwhile, regulatory standards such as traceability requirements and logistical and distributional requirements imposed by the rice importers are found to be major obstacles to rice importation from less-developed countries. Our study provides insights into tariff and non-tariff barriers existing in the global rice market, which is likely to assist policymakers operating in developing countries to help shape their policies and bolster rice competitiveness.