• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.3
• /
• pp.197-215
• /
• 2003

This study was carried out to investigate the effects of added emulsifier and enzyme on the quality characteristics of Seolgiddeok with black rice powder, green tea powder, Lentines edodes powder, pumpkin powder during storage. Samlpes were divided into two groups, the emulsifier-enzyme added group and the control, and stored fur 4 days at 2$0^{\circ}C$. Moisture content was measured by the air oven method; the Hunter's cole. values by Lightness (L), redness (a), yellowness (b) value; the degree of gelatinization by the enzyme digestion method, and expressed as glucose content by Somogi-Nelson method. The degree of retrogradation was calculated as the retrogradation rate using the degree of gelatinization value, and total cell and mold counts were also measured. Texture and sensory characteristics were also investigated. The results are as follows: The emulsifier-enzyme group was significantly different from the control from each examination and the retrogradation of pumpkin Seolgiddeok with emulsifier-enzyme was delayed the most among samples tested.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.1
• /
• pp.82-87
• /
• 2011

A fermented alcoholic beverage made from Sikhae, a Korean traditional fermented rice beverage, has been developed using a dextran producing isolate from Kimchi and Takju yeast. When both of yeast and the isolate inoculated for fermented beverage production it produced around 4% (w/v) ethanol and oligosaccharides during fermentation. Inoculation of Takju yeast and the dextran producing isolate showed a similar fermentation profile with case of yeast inoculation only, but the rate of sucrose use was slower than the case of yeast only. TLC analysis showed that oligosaccharides were produced during the fermentation of Takju yeast and the isolate from Kimchi. Therefore, it is possible to produce a functional fermented beverage by modification of dextran fermentation.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.454-463
• /
• 2020

The purpose of this study is to check the antimicrobial activity of terpene, a natural product-derived extract against bedding bacteria, and compare the number of bacteria detected. To this end, the number of mites and microbiological surveys were conducted on the pillows used at home to identify the presence of pathogenic strains that could cause the disease. Also, after two weeks test using pillow with terpene, a natural origin extract, the rate of reduction of fungi before and after the use of the substance and the effect of eradicating mites were evaluated. The antimicrobial activity of the terpene was observed by using the Pour plate method. The anti-mite effect was detected as weak positive (less than 100) in 2 of 4 pillows in the first test without the use of terpene. In the second experiment using a terpene, all were confirmed to be reduced to negative less than 20. The best anti-mite efficacy of terpene was found to be 20%. The purpose of this study is to suggest the possibility of developing antibacterial and anti-mite spray products for bedding using terpene.

• Genomics & Informatics
• /
• v.10 no.1
• /
• pp.58-64
• /
• 2012

Intron prediction is an important problem of the constantly updated genome annotation. Using two model plant (rice and $Arabidopsis$) genomes, we compared two well-known intron prediction tools: the Blast-Like Alignment Tool (BLAT) and Sim4cc. The results showed that each of the tools had its own advantages and disadvantages. BLAT predicted more than 99% introns of whole genomic introns with a small number of false-positive introns. Sim4cc was successful at finding the correct introns with a false-negative rate of 1.02% to 4.85%, and it needed a longer run time than BLAT. Further, we evaluated the intron information of 10 complete plant genomes. As non-coding sequences, intron lengths are not limited by a triplet codon frame; so, intron lengths have three phases: a multiple of three bases (3n), a multiple of three bases plus one (3n + 1), and a multiple of three bases plus two (3n + 2). It was widely accepted that the percentages of the 3n, 3n + 1, and 3n + 2 introns were quite similar in genomes. Our studies showed that 80% (8/10) of species were similar in terms of the number of three phases. The percentages of 3n introns in $Ostreococcus$ $lucimarinus$ was excessive (47.7%), while in $Ostreococcus$ $tauri$, it was deficient (29.1%). This discrepancy could have been the result of errors in intron prediction. It is suggested that a three-phase evaluation is a fast and effective method of detecting intron annotation problems.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.36-44
• /
• 1996

A comparison was made of two detection methods(UV absorbence detection and fluorescence detection with pre-column derivatization, with trifluoroacetic acid) coupled with HPLC for the simultaneous determination of aflatoxin $B_1, B_2, G_1$ and $G_2$. A good separation of the four aflatoxins was achieved on a reversed-phase $C_{18}$ column (30 cm x 3.9 mm) with methanol-acetonitrile-water(20+20+60) for absorbence detection or acetonitrile-water(25+75) for fluorescence detection at the flow rate of 1.0 ml/min. The calibration graphs were linear over the ranges 100 ppb-1 ppm for $B_1/G_1$ and 30~300 ppb for $B_2/G_1$ with absorbence detection, and 1~500 ppb for $B_1/G_1$ and 0.3~150 ppb for $B_2/G_2$ with fluorescence detection. The correlation coefficients were greater than 0.94 and 0.99 for absorbance detection and for fluorescence detection, respectively. The detection limit was 100 ng for $B_1/G_1$ and 30 ng for $B_2/G_2$ with absorbence detection, and 1 ng for $B_1/G_1$ and 0.3 ng for $B_2/G_2$ with fluorescence detection. Recovery rates of aflatoxin $B_1, B_2, G_1$ and $G_2$ added to yeast-extract sucrose broth medium were 66.6%, 59.4%, 67.5% and 59.2%, respectively, for absorbence detection and 82.9%, 71.5%, 80.0% and 69.3%, respectively, for fluorescence detection. The four aflatoxins in culture medium were quantitatively detected by the two methods. The aflatoxins in the rice sample were not detected the absorbence detection method, but were below 10 ppb using the fluorescence detection method. Analysis of aflatoxins by both the absorbence and fluorescence methods coupled with HPLC showed acceptable linearity and good recovery. The absorbence detection was less timeconsuming and safer for treatment. The fluorescence detection was more elective and sensitive though elevated $B_1$ and $G_1$ contents were determined from the TFA-induced conversion of $B_1$ to $B_{2a}$ and $G_1$ to $G_{2a}$.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.140-147
• /
• 1999

Since the national land area is small and the fanning land occupies only 24% of total land area in Korea, the promotion of agricultural productivity is urgent. In this process, the application rate of chemical fertilizer, which is the major pollution factor at agricultural non-point sources, has been increasing in every year. The present study examined difference of runoff loading of nitrogen and phosphorus by rainfall intensity(above 100mm, 80-100mm, 50-80mm and 30-50mm). Runoff loading of nitrogen and phosphorus by rainfall intensity has differences under similar rainfall intensity. We are considering that these results were affected by rainfall intensity as well as hydrological condition, soil management, whether or not fertilizer application, cropping, rice straw and plowing.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.4
• /
• pp.339-343
• /
• 2000

When plants are exposed to subfreezing temperatures ice crystals are forming within extracelluar space in leaves. The growth of ice crystal is closely related to the degree of freezing injury. It was shown that an antifreeze protein binds to an ice nucleator through hydrogen bonds to prevent growth of ice crystal and also reduces freezing damage. The antifreeze proteins in plants are similar to PR proteins but only the PR proteins induced upon cold acclimation were shown to have dual functions in antifreezing as well as antifungal activities. Three of the genes encoded for CLP, GLP, and TLP were isolated from barley and Kentucky bluegrass based on amino acid sequence revealed after purification and low temperature-inducibility as shown in analysis of the protein. The deduced amino acid of the genes cloned showed a signal for secretion into extracellular space where the antifreezing activity sup-posed to work. The western analysis using the antisera raised against the antifreeze proteins showed a positive correlation between the amount of the protein and the level of freeze tolerance among different cultivars of barely. Besides it was revealed that TLP is responsible for a freeze tolerance induced by a treatment of trinexapac ethyl in Kentucky bluegrass. Analysis of an overwintering wild rice, Oryza rufipogon also showed that an acquisition of freeze tolerance relied on accumulation of the protein similar to CLP. The more direct evidence for the role of CLP in freeze tolerance was made with the analysis of the transgenic tobacco showing extracellular accumulation of CLP and enhanced freeze tolerance measured by amount of ion leakage and rate of photosynthetic electron transport upon freezing. These antifreeze proteins genes will be good candidates for transformation into crops such as lettuce and strawberry to develop into the new crops capable of freeze-storage and such as rose and grape to enhance a freeze tolerance for a safe survival during winter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.398-405
• /
• 2014

Salt accumulation at soil surface is one of the most detrimental factors for crop production in reclaimed tidal land. This study was conducted to investigate the effect of capillary barriers beneath the soil surface on dynamics of soil salts at coarse-textured reclaimed tidal land. A field experiment was conducted at Saemangeum reclaimed tidal land for two years (2012-2013). Capillary barriers ($3.5{\times}12m$) were treated with crushed-stone, oyster shell waste, coal briquette ash, coal bottom ash, rice hull and woodchip at 40-60 cm depth from soil surface. Silage corn (Zea mays) was cultivated during the experimental period and soil salinity was monitored periodically. Soil salinity was significantly reduced with capillary barrier compared to that of control. Oyster shell waste was one of the most effective capillary barrier materials to control soil salinity at Saemangeum reclaimed tidal land. At the first growing season capillary barrier did not influence on corn growth regardless of types of the material, but plant biomass and withering rate of corn were significantly improved with capillary barrier at the second growing season. The results of this study showed that capillary barrier was effective on the control of soil salinity and improvement of corn growth, which indicated that capillary barrier treatment can be considered one of the best management practices for stable crop production at Saemangeum reclaimed tidal land.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.347-357
• /
• 2019

This study evaluated the raw materials for spawning Perenniporia fraxinea, to eliminate urushiol. The growth rates of spawns on grains of millet, brown rice, and wheat were 4.92±0.05, 2.20±0.03, and 1.93±0.03 mm/day, respectively, and the laccase activity was 0.86±0.02, 0.04±0.01, and 0.01±0.00 U/mL, respectively. These observations revealed millet as the most appropriate grain for spawn production in terms of growth rate and enzyme activity. Inoculation of lacquer tree (Rhus verniciflua Stokes) stem bark with millet spawns of P. fraxinea resulted in a reduction of its urushiol contents, up to 86.6% on the third day and up to 98.5% on the seventh day. The optimal period of cultivation to eliminate urushiol was three days with 68% of residual flavonoids and 42% of phenolic components. When compared to the product cultivated from liquid spawn, the millet spawn reduced the cultivation period from 10 days to 3 days for eliminating urushiol.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.43-50
• /
• 1980

The milling plants in Korea have been generally used the paddy-separator that operated in accordance with the principle of sieving action. This type of paddy separator was considered as inefficient, especially in relation to the new high-yielding varieties which have different size characteristics within their varieties and also as compared to traditional varieties. With the installation of modern paddy separator it may be possible to increase the overall milling system efficiency and to reduce the grain loss. This study was intended to identify and define important parameters required for assessing the separation performance of a tray-type paddy separator and to determine the optimum conditions of the inclination of separator-table. The results of the study were summarized as follows : (1) Separation performance can be given by use of many parameters found from the measurement of separator outputs. such as upper-tail recovery $(\varepsilon)$, purity of upper-tail $(\gamma)$ , separation recovery of brown rice $(\alpha)$, separation recovery paddy $(\beta)$, and efficiency of separator $(\epsilon)$, Among these para-meters , $\varepsilon$, $\gamma$, $\alpha$ and $\beta$, were designated , respectively, their independent properties of the paddy separator. In addition, their modes of variation due to a varied inclination of the separation table did not indicated in the same direction . However, the efficiency of separator had an advantage to indicate the overall characteristics of the separator performance with a clear optimum inclination condition of the separator table. (2) The optimum feed rate and maximum efficiency of the separator did not occur at the identical inclination of the separator table. Thus, for its practical operation it is necessary to compromise between the qualitative and quantitative performances of the separator. (3) The optimum setting of the separator table tested in the study showed to occur at its inclination of approximately $26^\circ<$/TEX> for the front and $8^\circ<$/TEX> for lateral.