본 연구의 목적은 복합레진의 slumping resistance를 측정할 수 있는 방법을 개발하고, 그 유용성을 평가하기 위해 rheometer를 이용해 측정된 복합레진의 여러 유변학적 성질과 slumping resistance의 상호 관련성을 밝히고자 하였다. 상용되는 hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil)와 nanofil composite (Z350)를 2 mm 두께의 디스크 모양의 시편으로 만들었다. 사각형의 단면을 가진 알루미늄 형판으로 레진 디스크를 눌러 표준화된 자국을 남겼다. 이것을 즉시 광중합하거나 (no-slump) $25^{\circ}C$ 에서 3 분간 방치한 후에 광중합 하였다 (slumped). 흰 경석고로 광중합된 레진을 복제한 후 laser 3-D profilometer 로 표면의 단면 영상을 얻었다. Slumping 전 후 홈의 깊이의 비를 구해 slumping resistance index (SRI)라 정의하였다. 각 복합레진의 중합 전 전단 점탄성을 측정하기 위해 회전형 rheometer 를 이용하여 동적회전전단실험과 squeeze test를 시행하였다. 더불어 flow test를 시행하였다. 동적회전전단실험 및 압착실험의 결과와 SRI의 상호관련성을 조사하기 위해 상관분석을 하였다. 여섯 가지의 재료의 SRI 값에는 차이가 있었다 (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). SRI 는 전단 점성(손실)계수 G"와 가장 큰 양의 상관관계를 보였으며 Tan ${\delta}$는 SRI와 상관관계가 없었다. SRI는 수직 가압에 대한 저항 보다 전단흐름에 대한 저항과 관련성이 높았다. 본 연구에서 도입된 imprint method와 SRI는 복합레진이 slumping 되는 경향을 정량화하였으며 복합레진 조작성의 평가방법으로 사용할 수 있었다.
도막의 기능은 피도물의 노출 환경 및 요구되는 물성에 따라 수지종류와 경화제는 적절하게 설계되어야 그 기능을 충분히 발휘할 수 있다. 본 연구에서는 동일한 OH 함량을 가진 알키드 폴리올, 폴리에스테르 폴리올, 폴리에스테르 변성아크릴 폴리올 등과 $T_g$ 및 OH 함량이 다른 아크릴 폴리올 수지 등 6가지 폴리올수지를 사용하고, 경화제는 알리파틱 이소시아네트와 아로마틱 이소시아네트를 사용하였다. 총 12종류의 투명도료를 제조 후, 화학적, 기계적 물성시험과 DMA 및 Rheometer를 이용하여 폴리올 수지타입 및 경화제 타입에 따른 폴리우레탄 도료의 종류별 도막물성 및 작업성을 관찰하였다. 그 결과 폴리올수지에 있어서 각각 다른 물리적, 화학적 성질을 가지는 도료개발 및 도장작업성의 개선 시 적절한 폴리올수지 종류 및 경화제를 선택하여 상 하도의 물성 및 도장 시스템에 합리적으로 응용할 수 있는 결과를 얻었다.
1. 관능검사 결과 색은 녹차가루 1.5% 첨가한 청포묵과 무첨가 청포묵이 각각 6.00과 5.82로 높은 선호도를 나타내었고 이들 시료간의 유의적인 차이는 없었다. 향미와 전반적인 기호도는 녹차가루를 1.0%, 1.5%, 0.5%, 무첨가 청포묵 순으로 높게 나타났으나 시료간의 유의적인 차이는 없었다. 맛은 녹차가루를 0.5%와 1.0%첨가한 청포묵이 가장 높은 선호도를 나타내었으며 무첨가 청포묵, 2.0%, 2.0%, 2.5%, 3.0% 순으로 낮은 선호도를 나타내었다. 2. 녹차가루 첨가 청포묵의 색도는 녹차가루를 첨가할수록 L값(명도)은 낮아지는 경향이었고, a (적색도)값은 점점 감소하여 적색은 감소하고 녹색이 증가된 것으로 나타났으며 b(황색도)값은 서서히 증가하여 황색이 증가된 것으로 나타났다. 3. 경도는 녹차가루 2.0%를 첨가한 청포묵이 4617로서 가장 높은 값을 나타내었고 녹차가루를 3.0% 첨가하여 만든 청포묵이 2220으로 가장 낮은 값을 나타내었다. 응집성은 녹차기루 2.5% 첨가한 청포묵이 가장 높은 값을 나타내었으며 1.0% 첨가한 청포묵이 가장 낮은 값을 나타내었다. 점성은 녹차가루 2.0% 첨가한 청포묵이 83.24로 가장 높은 값을 나타내었고 1.5%, 무첨가, 1.0% 청포묵 순으로 낮아졌다. 부서짐성은 2.5% 첨가한 청포묵이 95.52로 가장 높은 값을 나타내었고 0.5% 청포묵이 42.44로 가장 낮은 값을 나타내었다.
도로 포장에 널리 사용되는 아스팔트는 도로가 노출되는 환경에 따라 요구되는 물리적 특성이 상이하다. 이에 따라 첨가제의 배합에 따라 아스팔트가 어떤 물리적 특성을 나타내는지 평가하고 도로의 교통, 기후 환경에 맞추어 적절한 배합을 선택하는 것이 아스팔트 도로의 수명을 확보하기 위해 필수적이다. 아스팔트의 다양한 물리적 특성 중 소성변형에 대한 저항성을 측정하기 위해서는 Dynamic shear rheometer(DSR) 테스트를 주로 사용한다. 하지만 DSR 테스트는 실험 세팅에 따라 결과가 상이하고 특정 온도 범위 내에만 측정이 가능한 단점이 있다. 따라서 본 연구에서는 DSR 테스트의 단점을 극복하고자, Atomic force microscopy로부터 수집된 이미지를 학습하여 레올로지적 특성을 예측하고자 했다. 딥러닝 아키텍처 중 하나인 EfficientNet을 통해 이미지를 학습하였고 딥러닝 모델의 한계인 많은 데이터를 요구한다는 점을 극복하기 위해 전이학습을 이용하여 학습을 진행하였다. 학습된 모델은 이종의 첨가제를 사용하였음에도 높은 정확도로 아스팔트 바인더의 레올로지적 특성을 예측하였다. 특히, 전이학습을 사용하지 않았을 때와 비교하여 빠르게 학습이 가능했다.
In this study, we investigated for synthetic hydrotalcite in chloroprene rubber foam. Experiments were carried out to find the optimum content ratio by controlling the contents of MgO and Hydrotalcite. Swelling test in toluene immersion was made to measure the crosslinking density of CR foams, and the cure properties were investigated with flat die rheometer and Mooney viscosity. The difference of hardness, tensile strength and elongation at break were observed after immersing in 7% NaCl or 21% NaCl solutions for a day and four days. In addition, the volume change and water content remaining in CR foam were measured after immersing NaCl solution. As content of MgO increased, the value of the cure torque tended to increase, but it was almost constant above 2phr of MgO. However, the Mooney viscosity decreased with increasing MgO content. The crosslinking density, determined by the swelling ratio, showed that the CR compound without MgO showed a higher degree of swelling. When the content of hydrotalcite/MgO was 3:2, it was the lowest volume change of CR form. Also, As the content of hydrotalcite decreased, the difference of mechanical properties before and after immersion NaCl solution increased.
This study attempted to examine the effect on sensory characteristics and texture of Kyongdan in various volumes of adding Sungumcho power. The results are summarised as follows. 1. Sensory evaluation: The best recipe of Sungumcho Kyongdan was Sungumcho powder 1%, 2%, 3%. 2. The result of rheometer test was 1%, 2%, 3%, 4%, 5% Sungumcho Kyungdan were stabler than 0%.
연구목적: 본 연구의 목적은 열연화주입형 gutta percha와 resilon의 온도 변화에 따른 점탄성 변화를 관찰하고 조작성을 비교하기 위함이다. 연구 재료 및 방법: Obtura-II 시스템을 이용하여 세 종류의 gutta percha와 resilon을 $140^{\circ}C$와 $200^{\circ}C$로 가열한 후 사출 온도를 측정하였다. 점도계를 이용하여 온도 변화에 따른 재료들의 점탄성 특성(전단탄성계수, G'; 전단점성계수, G"; 손실 탄젠트, tan${\delta}$; 복소점도, ${\eta}^*$)을 관찰하였다. 점도계와 차동주사열측정기(DSC)로 재료들의 상전이 온도를 측정하였고 가압법으로 $60^{\circ}C$와 $40^{\circ}C$에서 재료들의 점조도를 비교하였다. 결과: 세 종의 gutta perchas는 온도에 따라 서로 다른 점탄성 특성을 나타냈다. $40-50^{\circ}C$에서 연화된 재료의 고체화 상변이가 일어났고, 점도계와 DSC로 측정된 상변이 시작 온도는 유사하였다. 상변이 시작 온도와 가압 시 점조도는 재료들마다 차이를 보였다(p < 0.05). Resilon은 gutta percha와 비슷한 유변학적 특성을 보였다. 결론: 열연화된 근관충전재는 냉각과정 동안 유변학적 특성의 변화를 나타냈고 재료들마다 서로 다른 점탄성 특성은 근관 내주입 시와 충전 시 서로 다른 조작성을 보임을 알 수 있다.
The Purpose of this dissertation is to study the preparation technique and physical properties of expanded rubber. The respective samples of NR, NBR and the standard compounds of EPDM rubber were prepared by mixing plasticizer DOP and LCR in various ratio. And their vulcanization characteristics, physical properties and foaming states were studied. Vulcanization characteristics were investigated using cure curve that had been obtained from Oscillating Disk Rheometer study, and the microscopic photographs of foaming states were obtained using electron microscope. The vulcanization characteristics of the samples, DOP 30phr and LCR 30phr, were found to be suitable. The tests, like hardness test and resilience, tensile test on the physical properties of each sample showed that plasticizing efficiencies of DOP and LCR were almost the same. Oil resistance test exhibited DOP was better than LCR and compression set test showed LCR was excellent plasticizer. The foaming states of NR, EPDM compounds were uniform, but those of NBR compounds were not uniform. Consequently vulcanization characteristics, physical properties and foaming states of all the samples satisfied the SAE requirements.
The Physicochemical, sensory and cooking properties of functionally fortified rice with dietary fiber and chitosan were compared with regular rice when the rices were cooked with pressure and electric cookers. Moisture content of functional rice before cooking was 11.11%, which was lower than 13.72% in regular rice. Accordingly, moisture contents of functional rice samples cooked both with pressure and electric cookers were lower than those of regular rice. L value showing the degree of lightness of cooked rice was significantly higher in rice samples cooked with pressure cookers. The ${\alpha}$ value, the degree of redness and the b value, the degree of yellowness, were the highest in the functional rice cooked with an electric rice cookers. Textural measurement of hardness using a rheometer showed the highest value in functional rice cooked with a pressure cooker. The degree of gelatinization measured using differential scanning calorimetry (DSC) before cooking showed higher onset gelatinization temperature ($T_0$) and peak gelatinization temperature ($T_p$) in functional rice compared with those in regular rice. The gelatinization enthalpy (${\Delta}H$) of functional rice was lower than that of regular rice, showing that functional foe had lower gelatinization energy compared with regular rice. When the samples were stored in a refrigerator for one week, the DSC showed faster retrogradation degrees in samples cooked with electric rice cooker, having significantly higher enthalpies of regular and functional rice cooked with electric cooked compared to those cooked with pressure cookers. The functional rice samples cooked with pressure cooker had higher consumer acceptance test values compared to those cooked with electric cookers.
When bread making, the condition of thawing-fermentation for frozen dough were tested in variable temperature, and measured thawing-fermentation time and volume of frozen dough. L-Ascorbic acid (L-Aa) was added in frozen dough for the comparison test of develop volume in bread staling degree of baking bread were measured additive frozen dough which was stoppages in freezing, staling degrees were tested hardness with Rheometer. The test for comparison of thawing-fermentation time in variable temperature was shown the condition of dough conditioner at 3$0^{\circ}C$ was most effective for bread making, Because That condition was required very short time(74 min) But, in this comparison of volume in final products was shown the products in the condition of thawing-fermentation at 3$0^{\circ}C$ was smaller than the products at 5$^{\circ}C$(418 ml). The baking volume of L-Aa additive frozen dough which has under gone thawing-fermentation at 3$0^{\circ}C$, were shown baking volume of 420 ml in 2 weeks storage terms to 100 mg/kg L-Aa additive dough and shown baking volume of 454 ml in 4 weeks storage terms to dough of 200 mg/kg additive weight. Staling degrees of L-Aa additive frozen bread were measured with Rheometer. The hardness of 100 mg/kg L-Aa additive frozen bread was sown low level hardness in 1~2 weeks freezing term, 150 mg/kg L-Aa additive frozen bread was shown low level hardness in 3 weeks freezing term. In 4 weeks freezing term, 200 mg/kg L-Aa additive frozen bread was shown low level hardness compared with non-additive L-Aa frozen bread. In comparison of frozen bread quality, non-additive L-Aa products was better than additive L-Aa products in equality of baking shape and external apparence. But in total quality in external and internal apparence, additive L-Aa products was better than non-additive L-Aa products.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.