• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1227-1240
• /
• 2014

Abandoned mines often cause environmental problems, such as alteration of landscape, metal contamination, and landslides due to a heavy rainfall. Geotechnical and rheological tests were performed on waste materials corrected from Imgi waste rock dump, located in Busan Metropolitan City. Debris flow mobility was examined with the help of 1-D BING model which was often simulated in both subaerial and subaqueous environments. To determine flow curve, we used a vane-penetrated rheometer. The shear stress (${\tau}$)-shear rate (${\dot{\gamma}}$) and viscosity(${\eta}$)-shear rate (${\dot{\gamma}}$) relationships were plotted using a shear stress control mode. Well-known rheological models, such as Bingham, bilinear, Herschel-Bulkley, Power-law, and Papanastasiou concepts, were compared to the rheological data. From the test results, we found that the tested waste materials exhibited a typical shear shinning behavior in ${\tau}$-${\dot{\gamma}}$ and and ${\eta}$-${\dot{\gamma}}$ plots, but the Bingham behavior is often observed when the water contents increased. The test results show that experimental data are in good agreement with rheological models in the post-failure stage during shearing. Based on the rheological properties (i.e., Bingham yield stress and viscosity as a function of the volumetric concentration of sediment) of waste materials, initial flowing shape (5 m, 10 m, and 15 m) and yield stress (100 Pa, 200 Pa, 300 Pa, and 500 Pa) were input to simulate the debris flow motion. As a result, the runout distance and front velocity of debris flow are in inverse propositional to yield stress. In particular, when the yield stress is less than 500 Pa, most of failed masses can flow into the stream, resulting in a water contamination.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.430-435
• /
• 2012

This study was carried out to investigate the rheological effects of black garlic extracts on the bread dough. 0, 5, 10 and 15% of black garlic extracts were added in the bread flour. Falling number, RVA (Rapid visco analyser), farinograph and alveograph were analyzed. Falling number was lowered by increasing the amount of the extract added in the wheat flour. The pasting characteristics of the dough by RVA, value of pasting temperature, peak viscosity, holding strength, final viscosity, break down and set back were increased compared to the control. In the Farinograph analysis, the consistency and the water absorption ratio were elevated with the increase of the extract added. However, the rapid decrease of stability and the time to breakdown values were observed by increasing the extract addition amount compared to the control. However the mixing tolerance index (MTI) was rapidly increased as the amount of the extract addition was increased, and the highest farinogram quality number was observed in the control. Through the alveograph analysis, $P_{max}$ value was found to show the highest value in the control, while the L and G values were higher but W values was lowered in the dough with added 15% black garlic extract. As a result of the analysis, there was no significant bad effect until 5% of black garlic extracts was added to the bread dough.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5636-5645
• /
• 2015

Physical characteristics of aggregates affect the workability and strength of mortar and concrete, which include their fineness ratio, particle size distribution and water absorption. The workability of construction materials decreases if the incorporated fine aggregates show improper size distribution of their particles. This study shows the particle size effect on the rheological behavior of mortar and provides basic information for evaluating its workability. A mini-slump flow test was adopted to evaluate the workability of mortar. In addition, its plastic viscosity and yield stress were measured using a rheometer for building materials. The sand samples were prepared by sieving river sand and sorting out with their particle sizes. As a result, it was observed that the fines less than 0.7 mm increases the yield stress and plastic viscosity of the mortar samples. If the fines are less than 0.34 mm, the water absorption of the fines dominates change on the workability.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.439-444
• /
• 2007

This study was carried out to analyze the quality change of salted mackeral treated with extracts of edible plan(Diospyros kaki, Teucerium veronicoides and Zanthoxylum schinifolium) during storage for develope of preparation methods and high quality of mackerel. The Hunter's color values of salted mackerel was not changed during strange. L, a and b value of salted mackerel teated with Korean herbal extracts was lower changed than those of control(mackerel not treated extracts of edible plants). Adhesiveness, and viscosity of salted mackerel was higher at $4^{\circ}C$ during storage than those at $25^{\circ}C$, and was higher in groups treated extects of edible plants at early storage than those in control group. Hardness was low in the salted mackerel treated extracts of edible plane and control group during storage. The salted mackerel treated Z. schinifolium extracts was the highest scores in sensory evaluation among groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1129-1136
• /
• 2001

This study was to investigate the suitability of six domestic wheat cultivars for the Korean-style steamed bread made under optimal conditions. Six wheat flours milled from cultivars of Greu, Kumgang, Eunpa, Taptong Kobun, and Allgreu contained 13.8, 13.7, 13.7, 13.0, 11.7, 11.0% of protein. Control bread was made from blend (protein 10.5%) of 50% high strength and 50% low strength wheat flours milled from imported wheats. The volume of steamed bread made from Kumgang was highest followed by Eunpa, Tapdong, Kobun, Greu, control bread, Allgreu. Especially, the bread qualities of Kumgand and Kobun were superior to the control bread, showing better surface characteristics such as smoothness, glossiness, and whiteness, better shapes and desirable texture. Domestic wheat flours, having medium strength with high protein content above 13.0% were suitable for steamed bread except for Greu. Volumes of steamed bread made from domestic wheat flours were correlated with protein and ash content, flour color (L value), farinograph dough development time and stability, whereas spread ratio, total bread score and overall acceptability were correlated with farinograph dough stability It is concluded that flour quality is more important factor than protein content when domestic wheat flours are chosen for Korean-style steamed bread

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.527-534
• /
• 2011

The purpose of this studies was analyzed moisture content, rheology and sensual test of jujube jungkwa by addition of water, sugar, fructose at processing of jujube jungkwa for development the optimization for processing of jujube jungkwa. The changes of moisture contents at process condition of jujube jungkwa were increased by increasing of sugar and water quantity. And moisture contents of jujube jungkwa were increased by high fructose quantity and low sugar quantity, but were decreased by high sugar and fructose quantity. The 'b' values of jujube jungkwa at low sugar quantity were decreased by the increasing of water quantity, but increased at high sugar quantity. The cohesiveness of jujube jungkwa at 0.03 kg of fructose were high by the increasing of sugar quantity, but those at 0.065 kg of fructose were high by the decreasing of sugar quantity. And those at 0.050 kg of fructose were similar without the quantity of sugar. The sweet taste of jujube jungkwa were increased by the increasing of water and fructose quantity. The characteristics of jungkwa at conditions of processing for the best quality of jujube jungkwa were 18-20% of moisture content, 2.0-3.0 of 'b' values, 3.0-3.2 of color scores, and 3.3-3.4 of sweet taste scores. The conditions of processing for the best quality of jujube jungkwa were determined to 0.95-1.04 L of water, 0.052-0.060 kg of fructose at 0.95 kg of sugar.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.328-334
• /
• 2000

A study was conducted to investigate the effect of ACAMS(Autoclaved-cooled amylomaize VII) and ACNMS(Autoclaved-cooled normal maize starch) containing resistant starch(RS) on ASW (Australian wheat flour) rheology and noodle quality. The water absorption in farinograph increased with the addition of ACAMS and ACNMS, but the dough stability decreased with the addition. The ACNMS added flours showed the highest initial pasting temperature and the lowest peak viscosity in RVA. The addition of ACAMS and ACNMS were not effective on the weight and volume of cooked noodles during cooking time for 5 min. However, as the cooking time increased, noodle weight and volume were the highest in control(no RS added flour) and the lowest in ACNMS added flours. Noodle texture was evaluated using rheometer. The hardness of RS(ACAMS, ACNMS) added noodles was higher than that of control. Cohesiveness was significantly different between control and ACAMS added noodles, but the cohesiveness of ACNMS added noodles was similar to other noodles. The elasticity of ACNMS added noodles in sensory test was lower than that of control but the smoothness and overall acceptibility were higher.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.520-531
• /
• 2004

The aim of this study was to investigate the effect of monomer and filler compositions on the rheological properties related to the handling characteristics of resin composites. Methods. Resin matrices that Bis-GMA as base monomer was blended with TEGDMA as diluent at various ratio were mixed with the Barium glass (0.7 um and 1.0 um), 0.04 um fumed silica and 0.5 um round silica. All used fillers were silane treated. In order to vary the viscosity of experimental composites, the type and content of incorporated fillers were changed, Using a rheometer, a steady shear test and a dynamic oscillatory shear test were used to evaluate the viscosity ($\eta$) of resin matrix, and the storage shear modulus (G'), the loss shear modulus (G"), the loss tangent ($tan{\delta}$) and the complex viscosity (${\eta}^*$) ofthe composites as a function of frequency ${\omega}{\;}={\;}0.1-100{\;}rad/s$. To investigate the effect of temperature on the viscosity of composites, a temperature sweep test was also undertaken. Results. Resin matrices were Newtonian fluid regardless of diluent concentration and all experimental composites exhibited pseudoplastic behavior with increasing shear rate. The viscosity of composites was exponentially increased with increasing filler volume%. In the same filler volume, the smaller the fillers were used, the higher the viscosities were. The effect of filler size on the viscosity was increased with increasing filler content. Increasing filler content reduced $tan{\delta}$ by increasing the G' further than the G". The viscosity of composites was decreased exponentially with increasing temperature.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.85-89
• /
• 2005

An aim of this study is to study the correlation between rheological properties and sedimentation of capsules in aqueous polymer solution with low viscosity. Rheological properties of aqueous polymer solutions were controlled by carbomer (C), acylate/C10-30 alkyl acylate crosspolymer (AC), and ammonium acryloyldimethyltaurate/VP copolymer (AV). Small amount of polymer C solution had the highest viscosity and yield stress of polymer AV solution was higher than that of polymer C solution in the same viscosity when the concentration of polymer AV exceeded $0.35 wt\%$. Each aqueous polymer solution was tested and the results showed that as viscosity and yield stress increased, the sedimentation ratio of capsules decreased. The viscoelasticity data also showed the same tendency in a shear stress range of 0.1 to 2.0 Pa. These results demonstrated that the rheological properties of polymer solutions had a strong correlation with the sedimentation of capsules. When polymer I and AV were used, there was a synergistic effect and the correlation between rheological properties and sedimentation of capsules was very complicated. It was assumed that the characteristics of polymer structure and interaction between polymers caused this phenomena.

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.463-472
• /
• 2019

This study investigated the quality characteristics and antioxidant activities of morning bread containing various amounts of aronia sourdough starter. Morning breads were prepared with different volumes (0% (AS0), 15% (AS1), 25% (AS2), and 35% (AS3)) of aronia sourdough starter based on wheat flour. In AS3 group (35% added group), the specific volume and baking loss rate were the highest but the bread height was the lowest. When the aronia sourdough starter was added up to 25%, the expansion power, specific volume, and bread height were significantly increased (P<0.05). According to the added amount of sourdough starters, the lightness and yellowness of the morning bread were decreased, however, redness was increased (P<0.05). In the rheology analysis, hardness, gumminess, and chewiness were significantly decreased with increasing amounts of aronia sourdough starters (P<0.05). However, cohesiveness was the highest in the AS2 group (25% added group). In consumer preference, the highest scores were shown in AS2 group (25% added group) in color, texture, and appearance. The total polyphenol and DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging ability were both significantly increased along with aronia sourdough content (P<0.05). In conclusion, morning bread with 25% aronia sourdough starter showed the best quality characteristics and antioxidant activities.