• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.113-113
• /
• 1994

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.97-97
• /
• 1997

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.24.2-24.2
• /
• 2006

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.158-159
• /
• 1998

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.80-80
• /
• 2000

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.115-120
• /
• 1998

The $TiN_x$ thin films were prepared on glass substrate by RF(radio-frequency) magnetron sputtering apparatus from a Ti target in a gaseous mixture of argon and nitrogen. In deposition, a RF power supply was used as a power source with a constant power of 240W, and the substrate was heated to $200^{\circ}C$. The films were obtained at nitrogen flow rates in the range 3-9 seem with a constant argon flow rate of 20 seem. For the films obtained, the chemical binding energy of the films was investigated by XPS (x-ray photoelectron spectroscopy) in order to analyze the chemical nature and composition of the films.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.1
• /
• pp.21-25
• /
• 1999

The TiN, thin films were prepared on glass substrate by RF(radio-frequency) magnetron sputtering apparatus from a Ti target in a gaseous mixture of argon and nitrogen. In deposition, a RF power supply was used as a power source with a constant power of 240W, and the substrate was heated to $200^{\circ}C$. The films were obtained at nitogen flow rates in the range 3-9 sccm with a constant argon flow rate of 20 secm. For the films obtained, the sheet resistance and the chemical binding energy of the films was observed by four-point-probe method and x-ray photoelectron spectroscopy(XPS) depth profiling respectively. In addition, we investigated the relationship between the surface resistance and the chemical nature of the films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.412-413
• /
• 2007

We report on the electrical, optical, and structural properties of indium zinc tin oxide (IZTO) anode films grown at room temperature on glass substrate. The IZTO anode films grown by a RF magnetron sputtering were investigated as functions of RF power, working pressure, and process time in pure Ar ambient. To investigate electrical, optical and structural properties of IZTO anode films, 4-point probe, Hall measurement, UV/Vis spectrometer, Field Emission Scanning Electron Microscopy (FE-SEM), and X-ray diffraction (XRD) were performed, respectively. A sheet resistance of $13.88\;{\Omega}/{\square}$, average transmittance above 80 % in visible range were obtained from optimized IZTO anode films grown on glass substrate. These results shown the amorphous structure regardless of RF power and working pressure due to low substrate temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.234-234
• /
• 2011

IGZO 투명 전도 박막은 TFT-LCD에 사용되는 투명 전도성 산화물 박막으로서 다양한 광전자 소자의 투명 전극으로 널리 사용되고 있다. 본 연구에서는 RF magnetron sputtering법으로 corning 1737 유리기판 위에 RF 파워의 변화에 따라 증착한 IGZO박막의 광학적 전기적 특성 변화를 연구하였다. 박막 증착 조건은 초기 압력 $2.0{\times}10^{-6}$ Torr, 증착 압력 $2.0{\times}10^{-2}$ Torr, 반응가스 Ar 50 sccm, 증착 온도는 실온으로 고정하였으며, 공정변수로 RF 파워를 25 w, 50 w, 75 w, 100 w로 변화시키며, IGZO 타겟은 $In_2O_3$, $Ga_2O_3$, ZnO 분말을 각각 1 : 1 : 2 mol% 조성비로 혼합하여 소결한 타겟을 사용하였다. 표면분석(AFM)결과 RF 파워가 증가함에 따라 거칠기가 증가하였으며, XRD 분석결과 Bragg's 법칙을 만족하는 피크가 나타나지 않는 비정질 구조임을 확인할 수 있었다. 가시광 영역에서 (450 nm~700 nm) 25 w일 때 85% 이상을 확인하였고, RF 파워가 증가할수록 밴드갭이 감소하는 것을 확인하였다. RF 파워가 100 w인 경우 carrier 밀도는 $7.0{\times}10^{19}\;cm^{-3}$, Mobility 13.4 $cm^2$/V-s, Resistivity $6.0{\times}10^{-3}\;{\Omega}-cm$로 투명전도막의 특성을 보였다.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.196-203
• /
• 1996

The highly c-axis oriented zinc oxide thin films were deposited on Sapphire(0001) substrates by reactive RF magnetron sputtering. The characteristics of zinc oxide thin films on RF power, substrate-target distance, and substrate temperature were investigated by XRD, SEM and EDX analyses. The physical characteristics of zinc oxide thin films changed with various deposition conditions. The higher substrate temperatures were, The better crystallinity of zinc oxide thin films. The highly c-axis oriented zinc oxide thin films were obtained at sputter pressure 5mTorr, rf power 200W, substrate temperature 350.deg. C, substrate-target distance 5.5cm. In these conditions, the resistivity of zinc oxide thin films deposited on pt/sapphire was 12.196*10$^{9}$ [.ohm.cm].